A A Grange Hall Rd Plant: 31 citaciones de la MSHA Metal/Non-Metal

EMPLOYEE WAS SPLICING CONVEYOR BELT AND THE CRIBBING THAT WAS USED TO HOLD BELT FELL DOWN 5 FT. WHEN HE WAS PULLING CONVEYOR BELT OFF' SMASHED HIS LEFT FOREARM.

EE TWISTED LEFT LEG WHILE CLIMBING DOWN OF JAW CRUSHER.

EE CURNED WRIST WHILE CUTTING WITH TORCH.

EE STRUCK ON RT KNEE BY HAMMER USED BY CO-WORKER. Y

EE WAS REPAIRING THE STARTER ON A FRON END LOADER. WHILE REMOVING THE STARTER FROM THE MACHINE, EE STRAINED LEFT SHOULDER. EE REMAINED ON THE JOB.

EE WAS CLIMBING UP INTO CAB OF WHEEL LOADER WHEN HE SCRAPED HIS RT LEG ON THE CAB PLATFORM. THE SCRAPE BECAME INFECTED.

EE WAS MOVING 2 PIECES OF 10-INCH DIAMETER STEELPIPE. THE PIPES ROLLED TOGETHER, CATCHING EE'S THUMB

EE WAS WORKING ON A CONVEYOR; KICKED BACKWARDS (USING HEEL OF BOOT) TO REPOSITION AN IDLER. HURTHEEL IN THE PROCESS OF DOING THIS.

EE COMPALINED OF SORE BACK FROM PULLING WEEDS AROUND MILL; CLEARING CLAY FROM CRUSHER; CLEARING GRATES ON HOPPER.

EMP WAS REPLACING IMPACT PLATE IN CRUSHER. EMP WAS CLEANING AND CHECKING IMPACT APRON WHICH PLATE CONNECTS TO AND CUT HIS ARM ON SHARP METAL EDGE OF APRON.

INJURED EE WAS ATTEMPTING TO LIFT A COME-E-LONG UP TO ANOTHER EE BY SWINGING IT [BY HAND] UP TO HIM & INJURED EE PULLED A MUSCLE IN HIS SIDE.

EE DORMIRE WAS BRINGING A PICK UP INTO THE MAINTENANCE GARAGE TO GET ITS BRAKES REPAIRED. WHILE SLOWLY DRIVING INTO THE GARAGE THE BRAKES FAILED. THE PICK UP HIT A CART WHICH IN TURN, STURKC E E EE CAUSING HIS INJURES.

EMP WAS DRIVING HAUL UNIT AND HIS BACK BECAME EXTREMELY SORE. EMP WAS STEERING, SHIFTING AND BRAKING.

EMP WAS ATTEMPTING TO THROW AN EMPTY BOX OVER THE HANDRAIL. EMP STEPPED ON A STONE WHILE TURNINGAND LOST HIS BALANCE, FALLING AGAINST THE CRUSHER AND NEARBY HANDRAIL.

EMPLOYEE WAS CHANGING BLOW-EARS ON AN IMPACT CRUSHER TWO OF THEIR MPLOYEES WERE ASSISTING EMPLOYEE WAS USING A 12-LB DEAD-BLOW SLEDGEHAMMER TO DISLODGE THE BLOS-BARS WHEN HE SWUNG THE HAMMER C ARELESSLY & HIT HIMSELF ON THE LEFT KNEE WAS SENT TO DOCTOR RETURNED TO WORK SAME DAY

EMPLOYEE WAS REPLACING A CONVEYOR ROLLER (UNIT WAS DE-ENERGIZED AND LOCKED OUT) WHEN ROLELR SLIPPED AND PINCHED EMPLOYEE'S LEFT HAND. ( EMPLOYEE DID NTO SEEK MEDICAL ATTENTON UNTIL 8-17-95 BU T DID NTO MISS ANY DAYS).

EMP WAS RE-LAGGING THE HEAD PULLEY ON THE CONVEYOR, IN A POSITION WHICH EVIDENTLY CAUSED SOME TRAUMA TO HIS KNEES. EMP DID NOT NOTICE INJURY ANDDID NOT REPORT IT UNTIL LATER ON - 4-11-95

EMPLOYEE WAS WALKING AND TWISTED HIS ANKLE. EMPLOYEE WAS EXAMINED BY PHYSICIAN AND RETURNED TO WORK ON SAME DAY.

WHILE ASSSISTING MECHANIC INSTALLING TRANSFER CASE ON TRUCK, MOUNTING BRACET SLIPPED AND HIT HIM ON THE HEAD.

WHILE DESCENDING LADDER, EMPLOYEE MISSED THE LAST RUNG ON LADDER. RESULTING IN TWISTING HIS BACK.

WHILE SHUTTING DOWN WATER DISCHARGE PUMP ENGINE EMPLOYEE SLIPPED & FELL AGAINST RADIATOR GUARD CUTTING HIS LEFT FOREARM

I NAME & I NAME WERE UNDER HAULER UNIT TAKING CLUTCH HOUSING OUT OF UNIT A 5FT BAR DROPPED ONTO I NAME HEAD & CLIPPED THE TOP OF HIS LEFT HAND BREAKING FINGER

WHEN ATTEMPTING TO MOVE A BARREL HE STRAINED HIS BACK.

PRESSING BEARING OFF SHAFT. BEARING BROKE INTO PIECES.

PULLING WATER HOSE IN PREPARATION OF CLEANIG AROUND PLANT AND DISTURBED A BEE.

PULLING ON A VINE ENTANGLED IN DUMP HOPPER.

WHILE REMOVING PIPE FROM SAND CLASSIFIER THE THUMB WAS PINCHED BETWEEN PIPE AND FRAME OF MACHINE

FINGER STEEL CHUTE LINER SLID AND PINCHED FINGER BETWEEN THE LINER AND THE CONVEYOR ROLLER.

ADJUSTING CLUTC2 ON DRAGLINE WHEN CATWALK BROKE WHEN HE FELL HE STRUCK HEAD AND CUT IT.

REPLACING BROKEN CABLE ON BOTTOM DUMP HAUL UNIT NEW CABLE SNAPPED OUT OF ROPE SOCKET WHEN INSTALLING STRIKING WORKER ON HIS LIP