Amrize Littleton Quarry Metal/Non-Metal

11,500 LBs roll away chute crushed employee's right foot.

11,500 lb roll away chute crushed employees lower back

Employee struck finger with a hammer

Cutting bolts overhead, slag from cut dropped and blew into ear. Slight, burn to ear.

EE arrived at the work site prior to the start of his shift. EE proceeded to head towards the mechanic shop EE parked his car in a location that had been plowed last week it was not the designated parking area. The EE got out of his car and proceeded to walk over an area of accumulated snow and ice. While doing so lost his footing and fell on his side.

Injury reported to company via MSHA inspector and Vermont DOL 8 days after ee stopped showing up for work for reasons unrelated to any injury. No report of injury from personnel onsite during any interview. We do not know anything other than ee states "banged knee". He has sought medical attention without our knowledge, have not seen medical reports.

Employye was using a utility knife to cut a piece of grease line off a bulk roll, the blade of the knife came out of the holder a cut the employees right thumb(employee is left handed) . The employee recieved three stitches in his right thumb and returned to duty.

The crusher hopper was cleared of material in order to perform repairs to the crusher. The employee was performing repairs when the wind blew a chip curtain causing a loose rock behind it to fall into the crusher striking the employee in the back of the head.

Several employees were attempting to remove a 4' section of I beam frozen into ice. They used a bobcat to loosen the beam and when it broke free it caught the employee's finger between the beam and the wall.

Employee was laying on his back and side welding the frame and a piece of slag got under the helmet and into left eye burning eye.

EMPLOYEE WAS SETTING A STEEL PLATE ON A HOPPER. ONE END OF THE PLATE SLIPPED OFF THE EDGE OF THE HOPPER CAUSING THE OTHER END TO FALL PINCHING THE RIGHT PINKY FINGER, RESULTING IN A LACERATION REQUIRING STITCHES.

EE ALLEGES THAT HE HIT A POTHOLE ON THE ROAD ANDSUFFERED A BACK INJURY.

EE WITH THE HELP OH ANOTHER EE WERE LIFTING A 150 LB TOGGLE SEAT UNDER THE JAW CRUSHER. THE TOGGLE PLATE SLID TOO FAST AND PINCHED THE FINGER OF THE EE. TOGGLE FELL ABOUT TWO FEET.

EE STATES HE WAS MOVING DEBRIS WHEN A STEEL SILVER FELL IN HIS EYE ABOVE THE RIM OF THE SAFETY GLASSES

EE WAS USING WELDER, PUTTING IN A NEW MOTOR BASE ON CORRODED METAL WHEN A PIECE OF RUST BOUNCED INT0 HIS EYE.

EE WAS CUTTING A BOLT OFF OF A CONVEYOR CHUTE. THE BOLT TRAVELED TO THE ADJOINING CHUTE IGNITING IT AND CAUSED FIRE TO TRAVEL UP THE CHUTE INTO THE POLYDECK SCREEN.

EMPLOYEE WHILE ATTEMPTING TO DISLODGE ICE FROM HOSE, HOSE BECAME SWOLLEN LIKE AND STRUCK EMPLOYEE ON THE FACE (LEFT).

EMPLOYEE WAS REPAIRING A MACK TRUCK AND CUT HIS FINGER ON A WIRE TIE.

EMPLOYEE WAS PULLING A HOSE FROM THE FUEL TRUCK WHEN HE PULLED A MUSCLE.

WHILE CLIMBING UP LADDER ON HIS MACHINE, HE LOST HIS GRIP ON THE HANDLE OF MACHINE LADDER AND FELL APPROX. 6 FEET TO THE GROUND LANDING ON HIS WRIST.

WHILE WORKING ON #3 CONVEYOR BELT (RECRUSH PLANT) HE WAS RELEASING RATCHET CABLE PULLER WHEN HIS HANDS SLIPPED OFF, CAUSING THE HANDLE TO HIT HIM IN THE CHIN.

HEAVY EQUIP OPER CLEANING SETTLEMENT POOL FELT MACHINE BEGIN TO TILT TOWARD POOL.BANKING 3-5'HIGH GAVE WAY UNDER MACHINE.OPER HAD ENOUGH TIME TO SWING BOOM ARM INTO PLACE PREVENTING SUBMERSION OF OPERATOR CAB.

EMPL DISLODGING ROCK,STRAINED LOWER BACK.

EMPLOYEE STATES WHILE HOLDING BAR OF STEEL, SWINGING HAMMER, MISSED AND BRUISED THUMB.

EMPLOYEE SLIPPED AND FELL APPROXIMATELY FIVE FEET FROM CONVEYOR - STRIKING UPPER BACK.

EMPL STATES WHILE UP ON SCATWALK CARRYING WELDING LEAD STEPPED ON ROCK ON CATWALK TWISTING ANKLE.

ALLEGES NAGGING PAIN BECAME WORSE RESULTING IN VISIT TO DR. PROBLEM ORIG FROM SHOVEL. AT PRT PLANT.

EMPLOYEE STATES THAT WHILE LIFTING ACETYLENE TANK WITH FELLOW EMPLOYEE, HE FELT SHARP PAIN IN LOWER BACK.

EMPLOYEE ALLEGES THAT WHILE DRIVING EUCLID ONE OF THE WHEELS WENT INTO A H OLE CAUSING THE SEAT TO BOTTOM OUT & EMPLOYEE HIT BOTTOM WHERE SEAT STOPPERS ARE RESULTING IN AN INJURY TO HIS LOWER BACK

EMPLOYEE ALLEGES THAT FELLOW EMPLOYEE WAS WELDING ON THE SIDE OF THE HOPPER AND HE WAS OPERATING CRAME. THEAT NIGHT HIS RIGHT EYE CONINUED TO BOTHER HIM.

EMPLOYEE ALLEDGES THAT WHILE STEPPING DOWN OFF OF BACKHOE HE STEPPED ONTO WET TRACK CAUSING HIM TO SLIP AND FALL INJURING HIS RT SIDE ARM CHEST FOREHEAD AND LEFT LEG

EMPLOYEE ALLEGES THAT WHILE USING SLEDGE HAMMER TO REMOVE BOLTS OUT OF PLATE HE MISSED THE PUNCH AND HIT HIS RIGHT INDEX FINGER.

EMPLOYEE ALLEGES THAT HE HOOKED CONVEYOR UP TO ONE CRANE AND THEN REACHED FOR SECOND HOOK TO STABILIZE LOAD WHEN HE SLIPPED AND FELL CAUSING INJURY TO RIB CAGE LEFT SIDE.

EMPLOYEE ALLEGES THAT WHILKE HAMMERING FEED TUBE INTO CRUSHER HE MISSED CAUSING HIS FIRST FINGER LEFT AHND TO GET PINCHED BETWEEN PIECE OF METAL AND HANDLE OF THE SLEDGE HAMMER CAUSING A LACER ATION.

EMPLOYEE ALLEGES THAT WHILE REPAIRING A RUBBER SCREEN FOREIGN OBJECT ENTERED HIS LEFT EYE.

EMP. ALEGES THAT WHILE ATTEMPTING TO REMOVE OVERSIZE ROCK FROM THE JAW CRUSHER THE ROCK SLIPPED AND CRUSHED HIS RING FINGER LEFT HAND.

EMP. ALLEGES THAT HE TWISTED HIS BODY WHILE REMOVING ROCKS FROM CONVEYOR BELT CAUSING HIM TO STRAIN HIS BACK.

EMP. ALLEGES THAT WHILE REMOVING BAR FROM MACHINE, BAR RELEASED SUDDENLY CAUSING HIM TO FALL OVER, INJURING RIGHT THUMB.

EMPLOYEE ALLEGES THAT WHILE HOLDING BRAKE AND THROTTLE PEDALS AND PULLING LEVER, MUSCLE IN HIS BACK WAS STRAINED.

DRILLER WAS STANDING ON PLATFORM MOVING DRILL. WHEN HE STOPPED DRILL, HE STEPPED DOWN. HE STEPPED ON ROCK, NOT ON SOLID GROUND C CAUSING KNEE TO TWIST.

A NEW STAIRWAY HAD BEEN INSTALED AT HE PRIMARY WITH A SAFETY GATE. TE EMP. HIT THE SAFETY GATE WHEN CLIMBING THE STAIRWAY. THE WILL BE MODIFIED TO BE MORE VISIBLE.

EMPLOYEE ALLEGES THAT WHILE CUTTING A PIECE OF RUBBER WITH A RAZOR BLADE KNIFE THE KNIFE SLIPPED CAUSING A LACERATION TO HIS THIGH.

EMPLOYEE ALLEDGES THAT HE JAMMED DOWN ON TO THE DECK OF THE PORTABLE CRUSHER LANDING ON ANGLE IIRON CAUSING HIM TO TWIST HIS RT FOOT

LABORER WAS HURRYING TO FINSH HIS DUTIES AT A HOLE BECUASE DRILL WAS BEING MOVED OUT OF AREA. AS DRILLER WAS MOVING THE DRILL, HE REPOSTIONED THE BOOM FOR BETTER STABILTIY DOING SO, A PIECE O F STEEL SHIFTED AND FELL OUT OF THE RACK HITTTING HIS FOREARM. SINCE THE BOOM IS IN A NEAR HORIZONTAL POSTION WHEN THE DRILL IS BEING MOVED, THE STEEL ROLLED FROM THE RACK, KNOCKING THE LEFT

EMPLOYEE ALLEGE8 THAT WHILE HE WAS CUTTING A PIECE OF METAL IT FELL ONTO HIS RT KNEE AND CAUGHT HIS RT HAND BETWEEN HIS LEG AND PIECE OF METAL CAUSING A BURN TO HIS RT KNEE AND A SPRAIN TO HIS THUMB 3

EMPL STEPPED DO4N OFF WALKWAY TWISTED RIGHT ANKLE.

EMPLOYEE ALLEGE8 THAT DUST IN THE AIR BLEW IN HIS EYES CAUSING IRRITAION.

EMPLOYEE ALLEGE8 THAT WHILE CUTTING STEEL THE SHARP EDGE ON A PIECE OF STEEL CUT HIS THUMB LEFT HAND.

EMPL CLIMBING M9TAL LADDER HE SLIPPED CAUSING LACERATION TO LEFT UPPER ARM.

WHILE LIFTING S7REEN FELT PAIN IN LOWE BACK.

EMPLOYEE ALLEGE8 CHIP OF STEEL PENETRATED HIS RIGHT EYE.

EE STATES THAT 2E SLIPPED OFF OF MACHINERY & HIT HIS LEG AGAINST THE STEEL PADS CAUSING LACERATION TO HIS LEFT LEG.

EMPLOYEE WAS RE4OVING SCREEN FROM VIBRATOR WHEN HE LOST HIS BALANCE CAUSING INJURY TO HIS LOWER BACK.