BILL INMAN PIT #1 Metal/Non-Metal

EMPLOYEE WAS STEAM CLEANING TRUCK WHEN HOSE RUPTURED AT HOSE AND SPRAY GUN CONNECTION SCALDING HIS FOREARM AND HAND WITH HOT WATER.

UNLOADING TOOL BOX FROM SERVICE TRUCK EE STRAINED HIS BACK BECAUSE OBJECT WAS HEAVY.

EE WAS INSTALLING CLEVIS PIN ON LOW-HIGH SHIFTING LEVER OR TRANSMISSION ON TRUCK WHEN A PIECE OF DEBRIS FELL OFF OF FRAME RAIL OF TRUCK STRIKING EE ON FACE. DEBRIS THEN FELL IN BETWEEN SAFETY GLASSES AND FACE GETTING INTO HIS RIGHT EYE.

WHILE FEEDING SANDPLANT WITH PIT TRUCK, EE HIT A SANDY BERM WHILE MAKING A RIGHT HAND TURN CAUSING DRIVER TO LOOSE STEERING WHEEL FROM HIS HANDS. TRUCK TURNED ALL THE WAY RIGHT AND FLIPPED OVE R ON DRIVER SIDE.

EMPLOYEE WAS ASSEMBLING SHOOT LID, LOST FOOTING WITH LID IN HANDS AND FELL BACKWARDS- CAUGHT HIMSELF BY LEANING FORWARD AND STRAINED BACK.

EE WAS DISMOUNTING FROM TRUCK WHEN STEPPED INTO DEPRESSION IN SOFT SAND CAUSING FOOT TO TWIST CLAIMS TO HAVE HEARD A POP OR CRACK

DRIVER WAS ON DRIVING ON HAUL ROAD WHEN STRUCK IN EYE BY "KICKED UP" ROCK FROM PASSING VEHICLE OR TRUCK.

WAS LOOKING UP WHILE LAYING DOWN UNDER MACHINE. WAS WEARING SAFETY GLASSES WHEN METAL PARTICLES FELL ON HIS FACE AND METALS PARTICLES FELL IN HIS EYES. THROUGH BOTTOM OF SAFETY GLASSES.

EE GOT UPON GRADERS TIRE TO FUEL WHEN SLIPPED DO TO GREASE ON TIRE. LOST BALANCE AND LANDED WITH HIS WHOLE WEIGHT ON 1 LEG. HURTING LOWER BACK.

EE WAS TIGHTEN PINON NUT WITH IMPACT WORKING IT WITH RIGHT ARM & HOLDING IT ON LEFT ARM. THE IMPACT HAD A 1" TO 3/4 ADAPTOR ON IT. THE SOCKET CAME OFF NUT & FLEW OFF EXPOSING A SMALL ROD THA H AD BEEN SUBSTITUTED FOR DETENT PIN. THE O RING HOLDING IT HAD VIBRATED OFF AND ROD SLIPPED OUT 11/2". AS THE IMPACT SHAFT SPINNING HIT HIS LEFTARM, IT CUT HIS ARM AS IT WENT UP HIS ARM

EE WAS CLEANING TIRE SHOP, AND WHILE MOVING PALLET TO ALIGN WITH FORK ON FORKLIFT HE FELT A PAIN IN RT. KNEE.

EMPLOYEE WAS HELPING ANOTHER EMPLOYEE MOUNT A JACK HAMMER ON A BACKHOE BOOM. WHILE HE WAS HOLDING PIN, OTHER EMPLOYEE ATTEMPTED TO DRIVE IT WITH SLEDGE HAMMER. ON HIS FIRST SWING, HE MISSED, H ITTING HIM IN LEFT KNEE.

WORKER WAS TRYING TO DISLODGE A ROCK STUCK IN GRIZZY. HE AND CO WORKER WERE HAVING TROUBLE REMOVING ROCK AND EE GAVE IT ONE LAST TRY HURTING LOWER BACK.

MECHANIC WAS USING A DIE GRINDER TO CLEAN SPALINES ON TRUCK AXLE. WHEN HE HIT A DIRT RUSTY SPOT THROWING RUST IN EYE.

WHILE CATCHING TAILGATE ON PIT TRUCK EMPLOYEE INJURED BACK.

WHILE TRYING TO PRESS A SHAFT OUT OF A HEAD PULLEY PLATE WELDER HAD HYDRO. JACK ON, BROKE ALLOWING JACK TO FALL OFF, HITTING HIM IN HEAD.

WHILE WORKING AT TIRE SHOP A GUST (TIRE SHOP IS ADJACENT TO WELDING SHOO) OF WIND CAME THROUGH PICKING UP DUST AND METAL DUST FROM FLOOR GETTING IN EMPLOYEES EYE.

WHILE REPAIRING SPINDLE WITH DIE GRINDER WIND FROM BEHIND BLEW METAL IN FROM BEHIND SAFETY GLASEES IN EYE.

CABLE HAD BECOME TRANGLED AND BUCKET COULD NOT BE LOWERED.WHILE ATTEMPTING TO UNTANGLE CABLE THE WEIGHT OF THE PULLED SLACK AND PINNED HAND AGAINST THE WENCH.

EE INJURED LOWER BACK WHILE UNLOADING A TRAILER LOAD OF 8"X1/4" CHANNEL HE APPARENTLY LIFTED WRONG.

INJURED WAS MOVING A 8" BY 12' PIPE TO ADJUST (PIPES WERE LEGS ON A WATER TANK) LEG PLACEMENT.

OTHER EMPLOYEES WERE CLEANING AN AREA USED FOR EQUIPMENT STORAGE.INJURED EMPLOYEE WAS OPERATING A SMALL HYDRO CRANE WHEN LIFTING AN OLD CRUSHER FRAME THE CRANE BEGAN TO TIP SLIGHTLY.EMPLOEE ST RAIGHTENED UP SUDDENLY INJURED LOWER BACK.

MECHANIC WAS INSTALLING LIFF CYLINDER ON SEMI DUMP WHEN HIS FOOT SLIPPED OFF TRAILER FALLING TO GROUND COLLAPSING ARCH ON FOOT.

WAS HELPING REP5ACE CUTTING EDGE ON LOADER BUCKET. CUTTING EDGE BROKE AWAY FROM BUCKET PUTTING A STRAIN ON HIS LEFT WRIST & ARM. HIS WRIST WENT UP. SENT HIM TO HAVE X-RAYS.

I.NAME OBSERVED A ROCK LEDGED BETWEEN HEAD PULLY AND CONVEYER, FRAME HE CLIMED, THE STOCK PILE REACHED IN TO GET THE ROCK. HE GOT BIT IT OUT ABOUT 1/2" OF HIS LEFT THUMB OFF HE KNEW HE SHOULD NOT DO SO.