Cedar Creek No 5 Surface Coal

DESCENDING DOWN A LADDER ON A HIGHWALL DRILL, WHEN THE BOTTOM STEP BROKE AND HE HIT HIS SIDE ON THE UPPER PART OF THE LADDER.

EE JERKED HIS HAND FROM A LID STARTING TO FALL ON IT AND CUT HIS HAND.

EE STATES: BENT DOWN TO CUFF A CORD, SLIPPED IN MUD AND FELL ON A KNIFE BLADE.

EE WAS CLIMBING DOWN FROM TOP OF THE 777A TRUCK WHEN HIS HAND HIT THE TURBO HE WAS WORKING ON CAUSING THE TURBO TO TOPPLE OVEN AND STRIKING EE ON HIS HEAD, CAUSING MINE CUT.

OPERATING D-9 BULLDOZER, DOZER SLIPPED OFF A ROCK, OPERATED STATED THAT IT JARRED HIM.

EE WAS TAKING TREE CUTTERS EQUIPMENT DOWN INTO A NEW HOLLOW FILL LOCATION. BIG DOZERS WERE ABOVE HIM PUSHING INTO ANOTHER HOLLOW FILL IN TH OPPOSITE DIRECTION. A ROCK BROKE LOOSE ADN ROLLED DOWN THE HILL STRIKING THE DOZER ON TEH RIGHT SIDE. THE ROCK HIT THE BRUSH GUUARD MASHING IT INTO EE'S RIGHT SHOULDER AND FOREARM.

EE WAS LOADING DRILL STEEL INTO THE DRILL STEEL RACK. ONE OF THE PIECES WAS HUNG UP. IT SLIPPED LOOSE & HIT EE ON THE LEFT HAND & BRUISED IT

TIGHTENING BOLT ON A 1400 ENDLOADER WITH A RATCHET. THE RATCHET BROKE AND THE SHARP POINT LACERATED HIS PALM OF HIS RIGHT HAND.

EMPLOYEE WAS WORKING DURING RAIN STORM WHEN HIS FOOTING BECAME VERY SLIPPERY. WHILE FILLING A PORTABLE TANK ON TRUCK, HE SLIPPED AND FELL FROM TRUCK STRIKING A CONCRETE PIER, RESULTING IN INJU RY.

HE WAS ATTEMPTING TO GET INTO THE ENDLOADER OPERATOR'S COMPARTMENT, WHEN HIS FOOT SLIPPED AND HE FELL TO THE GROUND.

ALLEGED ACCIDENT/INJURY. HE STATED THAT HE SLIPPED ON THE DOZER.

EE WAS PULLING BRUSH WITH DOZER. HE BACKED OVER A STUMP JARRING HIS BACK AND ARM AGAINST THE SEAT 10-26-94 BUT DIDN'T TELL SUPERVISOR UNTIL 11-01-94. HE WORKED UNTIL MONDAY. HE WENT TO THE HOS PITAL 11-03-94. HAD AN XRAY. THE DR. SAID HE HADA STRAINED MUSCLE IN HIS BAKC AND BRUISED HIS ARM.

OPERATING DOZER AND HIT A LARGE ROCK SUDDENLY, CAUSING HIM TO INJURE HIS BACK. STARTED MISSING WORK 2-21-95.

HE WAS HOOKING CABLE TO BRUSH & TREES FOR DOZER TO PULL. WHEN A SMALL TREE GOT HUNG AND SWUNG AROUND HITTING HIM IN THE BACK.

IN THE PROCESS OF DRILLING A BLAST HOLE, THE DECK BUSHING WAS DISPLACED. EE WAS IN THE PROCESS OF REPLACING THE BUSHING WHEN IT FELL MASHING THE END OF HYIS MIDDLE FINGER ON HIS RIGHT HAND.

ROCK TRUCK OPERATOR EXITING TRUCK AT END OF SHIFT AS HE STEPPED TO THE GROUND FROM THE MAN LADDER HE SAID HE INJURED HIS BACK. AT TIME OF ACCIDENT HE THOUGHT IT WAS MINOR INJURY BUT IT DEVELOP ED INTO A MORE SERIOUS INJURY LATER.

EMPLOYEE WAS USING A SLEDGE HAMMER TO REMOVE A TOOTH FROM SHOVEL BUCKET. A PIECE OF METAL CHIPPED OFF LANDING IN HIS LEG.

EMPLOYEE WAS CHECKING LEVEL OF WATER IN WATERTANK, WHEN THE TANK FELL DOWN TO THE GROUND.

HE ARRIVED AT WORK ON7-15-93 COMPLAINING OF BACK PAIN AND AT 9:30 PM HE COULD NO LONGER CONTINUE WITH HIS WORK BECAUSE OF PAIN.

ATTEMPTING TO GREASE ARM ON ENDLOADER WHEN HE SLIPPED AND FELL.

WHILE CLIMBING LADDER TO GET INTO ROCK TRUCK HE FELT SOMETHING POP IN HIS BACK.

EMPLOYEE WAS TORQUING ROD BEARING CAPS ON A D348 ENGINE THE SOCKET AND TORQUE WRENCH SLIPPED OFF THE BOLT AND PINNED HIS LEFT INDEX FINGER AGAINST THE ENGINE FRAME, MASHING FINGER AND ALMOST C UTTING OFF TIP OF FINGER.

CLAIMBING UP LADDER ON 777 ROCK TRUCK FELT SOMETHING POP IN BACK. DID NOT KNOW HE WAS HURT. DUE TO ARTHRITIS & STILL IS UNSURE OF INJ AT THIS DATE.

CHECKING ALTERNATOR ON 120 TON ROCK TRUCK GOT LITTLE FINGER IN ALT.FINS CUT AND BRUISED FINGER.

WORKING ON 922 LOADER REPLACING DRIVE SHAFT LIFTED DRIVESHAFT AND HURT HIS BACK.

WAS WORKING ON D10 DOZER INSTAALING PIN IN EQUALIZER BAR WITH SLEDGE HAMMER.HAMMER MISSED PIN AND HIT EMPLOYEE IN THIGH.

WELDING ON DOZER CHIPPING SLAG OFF WELD SLAG FLEW OFF WELD HIT HIM IN EYE;.

HE WAS WORKING ON A SUSPENSION CYLINDER OFF OF A 777 ROCK TRUCK. AS HE WAS TAKING BOLTS OFF AN BREAKING SYSTEM WITH A QUARTER IMPACT AIR WRENCH, WHEN THE UNIVERSAL AND SOCKET CAME OFF THE AIR WRENCH STRIKING HIM IN THE FOREHEAD.

HE WAS LIFTING AN OXYGEN TANK ON A SERVICE TRUCK AND STRAINED A MUSCLE IN HIS BACK - LEFT SIDE.