Corona Plant Metal/Non-Metal

The employee sustained 2nd degree burns. The employee was using a cutting torch to cut a one inch thick steel plate on a fabrication table. The slag from the cutting bounced off of the table and ignited the employee's shirt resulting in 2nd degree burns to the left side of the abdomen. The employee was placed restricted duty on 11/5/14 which is being accommodated.

On 5/25/09 A trespasser/Non-Employee was fatally injured from an apparent fall from elevation. The trespasser/Non-Employee's death occurred in route to the hospital.

The employee went to the company clinic on 9/3/08 and was placed on restricted duty. A porta-power disconnect fitting came apart when pressurised and struck employee on his safety glasses, resulting in a corneal abrasion and contusion to R-eye.

The employee went to see the company doctor on 6/7/2006 and was placed on restricted duty. The employee strained his lower back while lifting and carrying buckets during crusher sampling

Employee went to see company doctor on 8/21/04 and was placed on restricted duty. Employee was placing various tools in a pile, wrench, screwdrivers, etc. and strained his lower back.

WHILE CUTTING BOLTS FROM DISCHARGE LIP WITH OXY-ACETYLEN TORCH. SLAG FELL ONTO CHUTE LINER CAUSING FIRE WHICH RESULTED IN PROPERTY DAMAGE.

EMULSION HOSE BECAME LODGED IN BOREHOLE. EE JERKED ON HOSE TO FREE IT AND HEARD POP IN HIS LOWER BACK.

EE WAS USING A 20# SLEDGEHAMMER & KNOCKER WRENCH TO TIGHTEN JAW BOLTS; THE HAMMER WAS DEFLECTED CAUSING IT TO MISS THE WRENCH STRIKING FINGER CAUSING A FRACTURE & LACERATION TO L-INDEX FINGER. EE WENT TO SEE COMPANY DR ON 3/13/02 & WAS PLACED ON RESTRICTED DUTY.

EMPLOYEE WENT TO CLINIC ON 9/29/01 AND WAS RETURNED TO FULL DUTY AND RECEIVED PRESCRIPTION AND MEDICATION. EMPLOYEE WAS WELDING ON EXCAVATOR BUCKET WHEN HE RECEIVED FLASH BURN TO BOTH EYES.

EMPLOYEE WAS USING A KNIFE, CUTTING LEG OF SCREEN PANEL, PULLING KNIFE TOWARDS BODY AND KNIFE CONTACTED LEFT WRIST. EMPLOYEE WENT TO SEE DOCTOR ON 6-22-01, RECEIVED STITCHES AND WAS PLACED ON RESTRICTED DUTY.

EXITING CRANE CAB, EE SLIPPED ON OIL GETTING OFF CRANE AND HURT HIS BACK.

EE CUTTING METAL WITH A TORCH WHEN HOSE CAME OFF CUASING BURNS TO LOWER LEFT ARM & ABDOMEN AREA

EE WAS CUTTING TAPE OFF BOARD HOLDING BOARD WITH LEFT HAND AND HOLDING KNIFE WITH RIGHT HAND. KNIFE SLIPED, POINT OF KNIFE ENTERED LEFT HAND BETWEEN INDEX AND MIDDLE KNUCKLE.

EE WAS TRYING TO REMOVE LODGED ROCK FROM CONVEYOR WHEN HE SLIPPED AND SPRAINED HIS RIGHT ARM.

EMPLOYEE WAS STANDING NEXT TO A CO-WORKER THAT WAS WELDING AND RECEIVED FLASH BURN IN HIS EYES.

EE WAS CHOPPING WEEDS AROUND EXPLOSIVE MAGAZIE WHEN A BEE STUNG HIS RIGHT LOWER ARM/

EMPLOYEE WAS OPENING A HEAVY WOODEN DOOR ON A STORAGE SHED AND HIS FINGER WAS CAUGHT BETWEEN THE DOOR AND A STEEL DOOR HASP (LOCK). THE WEIGHT OF THE DOOR CAUSED THE HASP TO PINCH HIS FINGER.

WHILE ATTEMPTING TO EXTRACT A VALVE BODY THAT WAS IN AN AWKWARD POSITION, STRAINED RIGHT SHOULDER.

EMP WAS UP ON DUST SILO SHUTTING OFF VALVE WHEN THE AIR LINE BROKE BLOWING DUST PARTICLES INTO HIS FACE AND EYES.

WHILE EE WAS CUTTING BROKEN ADAPTOR OFF CAT WITH TORCH, HE WAS HIT BY CHEST PAINS.

EMPLOYEE WAS WELDING IN ROCK HOPPER USING AIR CHIPPER AND THE AIRBORNE DUST FROM THE CHIPPER FLEW INTO HIS RIGHT EYE.

EMPLOYEE WAS REMMOVING A ROCK A B-1 (OVERSIZE), THE CHAIN COME-A-LONG (3/4TON) CAME LOOSE LANDING ON EMPLOYEE'S FINGER CUTTING IT.

WHILE ATTEMPTING TO REMOVE ROCK FROM JAMMED CHUTE, A ROCK BECAME LOOSE DROPPING FROM THE FEEDER AREA ONTO EE'S LEFT INDEX FINGER, CUTTING IT.

EE WAS REMOVING WEAR SEGMENTS FROM 988B BUCKET WITH A 1" IMPACT AIR GUN. THE PLOW BOLT FELL OUT OF KEYED SLOT AND STARTED SPINING WHICH CUT HIS ARM (WRIST).

EE WAS HOLDING A STEEL PLATE IN PLACE WHILE ANOTHER EE WAS WELDING, HIS ELBOW HIT THE WELDING TORCH CAUSING OXYGEN TO ESCAPE FROM THE WELDING SPARKS. THIS CAUSED THE TORCH TO BURN HIS LEFT ARM .

EMPLOYEE WAS CHECKING OUT A BROKEN SHAFT ON A FINISH SCREEN. WHEN HE CRAWLED OUT HE SLIPPED ON ROCKS ON BELT AND CAUGHT HIMSELF ON THE SCREEN WITH HIS LEFT ARM TO KEEP HIMSELF FROM FALLING AND PULLED MUSCLES IN HIS LEFT ARM.

TIGHTENING CHAIN COME-ALONG ON DOZER TRACK WHEN STRUCK INBACK WITH FALLING CHAIN (END OF CHAIN-HOOK)

WHILE LIFTING ROCKS OUT OF TH EJAW CRUSEHR (WHICH WAS PLUGGED) EMPLOYEE PULLED MUSCLE IN LOWER BACK.

NO INJURIES. BRUSH FIRE OF UNKNOWN ORIGIN STARTED ON COMPANY PROPERTY. FIRE DEPARTMENT RESPONDED. NO ACCESS TO FIRE AREA. FIRE ALLOWED TO BURN ITSELF OUT AFTER FIRE BREAKS WERE CUT WITH COMPAN Y BULLDOZER.

FINISHING HOLE REACHING DRILL CONTROLS STRUCK ON R CALF BY ROCK ROLLED DOWN THE SLOPE