CRYSTAL SPRINGS Metal/Non-Metal

EE WAS USING SHOVEL TO CLEAN SAND FROM UNDERNEATH CONVEYOR BELT RESULTING IN HERNIA

EE SLIPPED WHILE CLIMBING DOWN FROM GRAVEL DUMP TRAILER & PULLED MUSCLE IN HIS BACK

EMPLOYEE WAS HELPING WITH MAINTENENCE BY INSTALLING TAIL PULLEY ON THE G-8 CONVEYOR BELT. EMPLOYEE'S FINGER BECAME CAUGHT BETWEN TAIL PULLEY SHAFT AND CONVEYOR FRAME AS TAIL PULLEY WAS BEING P OSITIONED.

EMPLOYEE WAS ATTEMPTING TO REMOVE A RUBBER FLAP FROM THE BED OF A DUMP TRUCK AND SLIPPED OFF SIDE OF DUMP TRUCK BED.

EMPLOYEE WAS TRANSFERRED TO ANOTHER TRUCK UNIT. THE DIFFERENCE IN STEERING AND SHIFTIN GREQUIREMENTS OF THE NEW UNIT CAUSED EMPLOYEES HAND AND ARM TO BECOME SORE AND SWOLLEN.

EE WAS ASSISTING IN MAINENEACE OF SAND SCREW SHAFTR.WHILE USING LIFT TO SUSPEND BEARING, THE CHAIN SLIPPED & STRUCK EE

EE WAS PERFORMING MAINTENANCE ON HEAVEY GREABLE BEEPING WHILE REMOVING BOLTS FROM BEARING MOUNT BEARING FELL ONTO EE'S LEFT HAND

EMPLOYEE WAS USING LARGE SLEDGE HAMMER AND PULLED MUSCLE IN HIS BACK.

EMPLOYEE WAS DISMOUNTING FROM CAB OF DUMP TRUCK WHILE AT PIT. HE MADE AN AWKWARD MOVE AND PULLED A MUSCLE IN HIS BACK.

EMPLOYEE WAS OPERATING TAIL GATE OF HAUL TRUCK AT PIT. CAUGHT FINGER IN TAIL GATE.

EE WAS ON LADDER TO END LOADER CAB WHEN HIS FEET SLIPPED OFF STEPS AND HE FELL STRAIGHT DOWN TO GROUND LANCING ON HIS FEET. EE IS UNDER PHYSICIANS CARE AND REAMINS OFF WORK AS OF THIS DATE.

EMPLOYEE WAS ATTEMPTING TO DISMOUNT FROM MACHINE & SLIPPED RESULTING IN HIS FOOT STEPPING ON LIFTING CONTROL THIS CAUSED THE LIFTING MECHANISM TO CYCLE RESULTING IN HIS RT LEG BEING CAUGHT BET WEEN MACHINE FRAME & LIFTING MECHANISM

EMPLOYEE WAS ASSISTING WITH MAINTENENCE TO WASTE PUMP MOTOR AT GRAVEL PLANT. AS HE WAS WALKING UNDER PLANT STRUCTURE. HIS HARD HAT FELL OFF AND HE STRUCK HIS HEAD AGAINST METAL FRAME OF PLANT.

EMPLOYEE WAS USING A HAMMER TO REMOVE BEARING FROM PUMP SHAFT. HAMMER GLANCED OFF SHAFT AND STRUCK EMPLOYEE ON RIGHT KNEE.

USING HAND HELD CHIPPING HAMMER FOREIGN OBJECT J FLEW UP ENTERED EYE

EMPLOYEE WAS WALKING DOWN EMBANKMENT TO CHECK ON WATER PUMP MOTOR WHEN HE SLIPPED AND TWISTED HIS ANKLE.

EMPLOYEE WAS DRIVING A DUMP TRUCK AND WIND BLEW SAND INTO BOTH EYES.EMPLOYEE CONTINUED TO WORK.LATER REQUIRED TREATMENT ON 07-09-90 WITH LOST TIME STARTING ON 07-09-90.

SWEEPING FLOOR IN WELDING ROOM, EXPOSED TO FLASH FROM WELDING MACHINE

EMPLOYEE WAS OPERATING DUMP TRUCK HAULING MATERAIL FROM PIT TO PROCESSING PLANT.ANOTHER VEHICLE CROSSED OVER CENTER LINE IN ROAD CAUSING EMPLOYEE TO RUN OFF ROAD IN ORDER TO AVOID COLLISION.EM PLOYEES TRUCK OVERTURNED RESULTING IN MINOR INJURIES TO EMPLOYEE AND SMALL AMOUNT TO DAMAGE TO DUMP TRUCK.

STEPING ACROSS METAL RAILING AND SCRAPED FRONT OF R. LEG.

EMPLOYEE WAS HOLDING A SCREEN AT THE SPLITTER PLANT WITH A HOOK THE HOOK CAME LOOSE CAUSING THE EMPLOYEE TO FALL BACKWARDS AND STRUCK HIS BACK AGAINST AN ANGLE IRON CROSS MEMBER BRACE EMPLOYEE WAS EXAMINED BY PHYSICIAN XRAYS

EMPLOYEE STATES THAT HE WAS CARRYING MACHINERY PARTS UP THE INCLINE CONVEYOR BELT CATWALK AND OVER-EXERTED HIMSELF. HE LATER STARTED EXPERINCING PAIN IN HIS RIGHT HIP AND LEG. IT APPEARS THAT THE EMPLOYEE HAS A PINCHED NERVE AND SURGERY WILL BE REQUIRED. THE ORIGIN OF THE EMPLOYEE'S CONDITION HAS ONLY RECENTLY BECOME KNOWN TO HIS EMPLOYER.

EMPLOYEE WAS RE1AIRING A GUARD ON THE CONVEYOR BELT LINE. THE GUARD FELL AND STRUCK THE EMPLOYEE ON HIS RIGHT LEG RESULTING IN A BRUISE TO SIDE OF LEG.

EMPL USING SHOV9L TO CLEAN OUT FROM UNDERNEATH CONVEYOR AND STRUCK RIGHT HAND AGAINST CONVEYOR FRAME.

EMPLOYEE WAS AS8ISTING THREE OTHER EMPLOYEES IN LIFTING PORTABLE WELDING MACHINE FROM REER OF PICK-UP ONTO GRROUND RESULTING IN OVEREXTION.

EE WAS USING HA4MER TO HIT A PIN ON DOZER. A PIECE OF METAL FLEW UP & STRUCK EE ON FOREHEAD RESULTING IN A LACERATION TO FOREHEAD.

EMPLOYEE WAS USING WRENCH TO TIGHTEN BOLTS ON RADIATOR HOSE CONNECTION.EMPLOYEE HAND CAME INTO CONTEST WITH ENGINE FAN BLADE RESULTING IN FRACTURE & LACERATIONS TO THUMB AND THREE FINGERS OF L LEFT HAND.

EE WAS ASSISTING IN CONSTRUCTION OF TRUCK RAMP WAS HELPING OTHER EE LIFT WOOD POST WHEN HE PULLED MUSCLE IN HIS RIGHT GROIN AREA.

INJURED PARTY WAS WORKING ON DRAGLINE OTHER EE WAS OPERATING END LOADER IN AREA. ENGINE ON END LOADER SUDDENLY WENT DEAD ALLOWING END LOADER TO ROLL FORWARD & STRUCK BOOM OF DRAGLINE. ENDLOA DER KNOCKED BOOM INTO EE STANDING ON DRAGLINE PLATFORM.

EMP WAS ADJUSTING HOIST FRICTION ON DRAGLINE WRENCH SLIPPED CAUSING EMP TO STRIKE HIS ARM AGAINST METAL BRACE