EE states: working on feeder, pulling on hydraulic hose and pulled lower back.
Lewis Creek Underground Mine: 526 citaciones de la MSHA Coal
Lewis Creek Underground Mine tiene $354K en multas propuestas de MSHA y $0 pendientes en 42 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Lewis Creek Underground Mine.
- Muertes
- 0
- Incidentes totales
- 23
- Años en registro
- 2012–2014
- Último incidente
- Sep 2014
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.ⓘ
Una orden bajo la Sección 107(a) retira a los mineros de un área cuando un inspector detecta un peligro inminente. Cada orden se levanta una vez corregida la condición, por lo que esto cuenta las órdenes emitidas, no las que están en vigor ahora.Lewis Creek Underground Mine tiene $354K en multas propuestas de MSHA y $0 pendientes en 42 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.ⓘ
Las proporciones se calculan sobre las citaciones que llevan la codificación de gravedad y negligencia de la MSHA; una pequeña parte de los registros no está codificada.ⓘ
Impugnar una citación ante la Comisión Federal de Revisión de Seguridad y Salud Minera es un derecho legal. Estas cifras presentan los resultados públicos de ese proceso, según el archivo de Violaciones Impugnadas de MSHA.- Conciliadas 172 · 99%
- Anuladas o retiradas 2 · 1%
ⓘ
Una citación Significativa y Sustancial cuenta como sobreviviente cuando la conciliación o la decisión del juez mantuvo la designación, o cuando la impugnación fue desestimada o quedó en rebeldía y la citación quedó como emitida. Las citaciones anuladas o retiradas, y las conciliaciones que quitaron la designación, cuentan en contra.ⓘ
Una reducción o desestimación ante la Comisión es un resultado legítimo de impugnar una multa propuesta. Las cifras son el monto propuesto y el monto confirmado en la decisión del expediente.| Expediente | Decisión | Juez | Año | Propuesta / confirmada |
|---|---|---|---|---|
| KENT 2013-668 | Settlement | Miller | 2013 | $146K → $108K |
| KENT 2014-0661 | Settlement | Miller | 2015 | $25K → $19K |
| KENT 2014-0498 | Settlement | Miller | 2014 | $18K → $13K |
| KENT 2015-0117 | Settlement | Miller | 2015 | $14K → $12K |
| KENT 2015-0118 | Settlement | Miller | 2015 | $9K → $6K |
| KENT 2015-0248 | Settlement | Miller | 2015 | $9K → $6K |
El muestreo de MSHA en Lewis Creek Underground Mine muestra que 95% de 404 muestras de polvo respirable de carbón cumplieron el estandar de 1.5 mg/m3.
ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.Polvo respirable de carbón
ⓘ
Las cifras de polvo respirable de carbón y sílice corresponden a instalaciones de carbón. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.
Última medición: 2015-03-23, hace 11 años
ⓘ
Las cifras de polvo respirable de carbón y sílice corresponden a instalaciones de carbón. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.ⓘ
El valor de concentración excesiva (ECV) es el umbral de aplicación por muestra de la propia MSHA, que incorpora la incertidumbre de medición; una muestra por encima de su ECV puede motivar una citación. El conteo cubre solo las muestras a las que MSHA asignó un ECV.- CONTINUOUS MINER OPERATOR206
- SHUTTLE CAR OPERATOR (STANDARD SIDE)60
- ROOF BOLTER (TWIN HEAD) (RETURN SIDE)30
Sílice (cuarzo)
Última medición: 2015-01-12, hace 11 años- CONTINUOUS MINER OPERATOR17
Ruido
ⓘ
La proporción cuenta las muestras de ruido cuya dosis medida superó el límite permisible de exposición de 90 dBA. Describe el lugar de trabajo muestreado, no lo que llegó al oído del minero: los programas de conservación de la audición y la protección auditiva usada durante el turno se registran por separado y no se reflejan aquí.
Última medición: 2014-12-16, hace 11 años
ⓘ
La proporción cuenta las muestras de ruido cuya dosis medida superó el límite permisible de exposición de 90 dBA. Describe el lugar de trabajo muestreado, no lo que llegó al oído del minero: los programas de conservación de la audición y la protección auditiva usada durante el turno se registran por separado y no se reflejan aquí.- SHUTTLE CAR OPERATOR (STANDARD SIDE)21
- CONTINUOUS MINER OPERATOR10
- ROOF BOLTER (TWIN HEAD) (INTAKE SIDE)10
ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.ⓘ
Las cifras de polvo respirable de carbón y sílice corresponden a instalaciones de carbón. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.| Año | dentro de 1.5 mg/m3 | muestras |
|---|---|---|
| 2015 | 100% | 14 |
| 2014 | 92% | 174 |
| 2013 | 96% | 211 |
| 2012 | 100% | 5 |
| Año | sílice prom. (%) | muestras |
|---|---|---|
| 2015 | 2.8 | 2 |
| 2014 | 1.8 | 10 |
| 2013 | 2.1 | 8 |
| Año | sobre el LPE | muestras |
|---|---|---|
| 2014 | 0% | 42 |
| 2013 | 2% | 55 |
Lewis Creek Underground Mine reportó a la EPA la liberación de 0 toneladas métricas de metano en 2015.
ⓘ
Las cifras de metano son las que el operador reportó al Programa de Reporte de Gases de Efecto Invernadero de la EPA (subparte FF), recopiladas a nivel de instalación. Solo se muestran las instalaciones de la EPA que corresponden a un único registro de mina de MSHA, y el equivalente en CO2 aplica el factor GWP-25 que usan los datos publicados por la EPA.| Año | t CH4 | t CO2e |
|---|---|---|
| 2015 | 0 | 0 |
| 2014 | 363 | 9,070 |
Lewis Creek Underground Mine registró 8.23 casos de lesión reportables por cada 100 trabajadores a tiempo completo en 2014.
ⓘ
Esta tasa son los casos de lesión reportables por cada 100 trabajadores a tiempo completo por año, calculada como 200,000 por los casos dividido entre las horas-empleado reportadas por el operador a la MSHA. Los casos son lesiones que la MSHA clasificó en grado 01 a 07; se excluyen los eventos de solo accidente que no lesionaron a nadie, y también las lesiones de contratistas, cuyas horas no corresponden a una sola mina. Las tasas comienzan en el año 2000, cuando inicia el reporte trimestral de empleo, y se omiten por debajo de 20,000 horas en un año.| Año | tasa de casos totales | días perdidos | mortales |
|---|---|---|---|
| 2014 | 8.23 | 2.47 | 0.000 |
| 2013 | 8.68 | 4.34 | 0.000 |
- Armstrong Coal Company, Inc. 2012 al presente
ⓘ
La producción de carbón se reporta trimestralmente y va con retraso respecto al periodo actual; los trimestres más recientes pueden estar incompletos.| Año | Empleados | Carbón producido (toneladas) |
|---|---|---|
| 2015 | 31 | 99,250 |
| 2014 | 98 | 637,949 |
| 2013 | 101 | 618,495 |
| 2012 | 29 | 8,863 |
Lewis Creek Underground Mine se ubica en Ohio County, Kentucky, donde la categoría minera del Censo representa el 1.0% del empleo del condado.
ⓘ
Las cifras del condado provienen de la Encuesta sobre la Comunidad Estadounidense de la Oficina del Censo de EE. UU., estimaciones quinquenales agrupadas, por lo que la edición de 2023 abarca de 2019 a 2023. La categoría del Censo es 'minería, explotación de canteras y extracción de petróleo y gas', que es más amplia que la jurisdicción de la MSHA e incluye a trabajadores de petróleo y gas que ninguna mina emplea. Estas cifras describen el condado circundante, no esta mina, y no son un factor en ningún incidente específico.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2015 Q2 | 3,331 | 0 | 0 | 0.0 |
| 2015 Q1 | 30,008 | 18 | 1 | 599.8 |
| 2014 Q4 | 26,044 | 14 | 2 | 537.6 |
| 2014 Q3 | 46,322 | 53 | 10 | 1144.2 |
| 2014 Q2 | 85,122 | 87 | 16 | 1022.1 |
| 2014 Q1 | 85,653 | 126 | 9 | 1471.1 |
| 2013 Q4 | 77,709 | 92 | 6 | 1183.9 |
| 2013 Q3 | 75,231 | 51 | 9 | 677.9 |
Mostrar 4 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2013 Q2 | 49,251 | 31 | 4 | 629.4 |
| 2013 Q1 | 28,199 | 25 | 4 | 886.6 |
| 2012 Q4 | 18,927 | 10 | 5 | 528.3 |
| 2012 Q3 | 6,329 | 3 | 0 | 474.0 |
Incidentes reportables
23 en archivo2014 · 12 incidentes
While reaching for a bolt a small piece of rock fell and cut left middle finger putting five stitches in it.
Loading supplies on roof bolter and went to put a box of glue on bolter and felt a sharp pain in his lower back. Finished his shift and went to doctor the next day. Doctor said he had a Lumbar strain. They give him light duty until he followed up with an ORTHOPEDIC surgeon.
installing cutter boom pin with sledge hammer and shard of metal came off pin and stuck in the right cheek
Employee was bending a roof bolt and felt pain in his right shoulder causing a strain/sprain to the shoulder.
Employee was loading some supplies underground and a small piece of draw rock fell and hit his left cheek causing a cut to the cheek. After work he went to the hospital, and got it cleaned out, they put 3 stitches in.
Roof Fall in the Third West Submain, in the last open cross-cut in # 8 entry on the #2 unit. The roof fall was about 18 feet wide and about 18 feet long and 7-8 foot high.
Employee was bolting in # 3 entry, went to drill his outside hole when a piece of draw rock fell and hit his right knee, resulting in a contusion on his right knee, doctor give him 2 days light duty.
EE was working on the miner with the mechanics and picked up a flex side for the miner off of the Diesel ride, he then walked about 8ft and put in the ram car bed and then got in the car and took it to the miner. He then felt pain in his lower back on the right side. It was about an hour after picking the flex side up that he felt the pain.
EE was tighten a ram car wheel with a 3/4 ratchet and socket and it slipped loose, slipped and hit his head on the edge of the ram car. He had to have stitches in his forehead above his right eye brow.
EE was working on putting in a head drive. He was on a ladder, went to climb down when he got to second step his foot slipped and he fell and strained his left knee.
Employee was cutting a piece of plastic conduit with a belt knife and slipped and cut right leg. He went to hospital and had to have seven stitches put in his leg. No lost time on this accident.
2013 · 10 incidentes
EE was working on miner panel, Panel slipped and fell and caught right index finger between panel and right knee causing him to cut right index finger. Had to have stitches in his finger.
Employee was unloading roof bolt supplies from a scoop bucket when a small piece of rock fell from the mine roof striking his right hand.
Employee was tramming a Ram Car back to the Continuous Miner. The Continuous Miner has just moved to a new location between crosscuts #7 and #8 entry when the Ram Car struck the tail of the miner causing his head to strike the canopy of the Ram Car.
Employee was roof bolting in the face area of 9 entry. As he was removing his drill steels from the roof bolt hole a piece of rock fell from the mine roof striking his hard hat causing the hard hat to cut the back of his head. He received three (3) small staples to the head. This did not become a Lost Time Accident until August 15, 2013.
Employee stated that he was cutting a high voltage guard, he said it was laying on his leg and the knife cut through the guard, cutting his leg
The employee had finished installing a row of bolts. He then got up to go back and make up some more pins, he fell on slick rock and twisted his knee.
Damaged pie pan, Employee did not notice and it was hanging down. The employee ran into it and cut above the left eye brow
Employee moving roof bolter from #1 entry to #2 entry after traveling over high spot on mine floor, struck his head on canopy causing pain to neck area.
Employee was tramming a roof bolter around the corner of a coal pillar into the #9 entry. As he was turning the bolter he had his left hand on the hand hold which is located underneath the canopy. The canopy cut into the corner of the coal rib causing the coal rib to strike his left hand severing his pinky finger.
The employee was roof bolting in the face area in #7 entry on the #1 unit when the suction stopped up on his side of the roof bolter. As he was cleaning it out using a small metal rod he accident struck the rotation lever causing the rod to strike his head resulting in a laceration. He received 12 small staples to the affected area of his head.
2012 · 1 incidente
There was an unplanned roof fall in the intersection of spad no. 2+40 in the no. 4 Entry of the North Mains. The fall blocked the primary escape way and it measured approximately 19'in length, 19' in width and 10'high.