PHELPS DODGE BAGDAD, INC. tiene $2K en multas propuestas de MSHA y $0 pendientes en 0 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Avísenme cuando se presente un nuevo incidente de la MSHA en PHELPS DODGE BAGDAD, INC..
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2001 Q4 | 0 | 0 | 0 | |
| 2001 Q3 | 0 | 0 | 0 | |
| 2001 Q2 | 0 | 0 | 0 | |
| 2000 Q4 | 109,166 | 0 | 0 | 0.0 |
| 2000 Q3 | 122,015 | 16 | 4 | 131.1 |
| 2000 Q2 | 98,743 | 0 | 0 | 0.0 |
| 2000 Q1 | 113,399 | 2 | 0 | 17.6 |
MANITOWOC CRANE MODEL #4100W SERIES 11 45 SHEETS OF ROOFING MATERIAL SUSPENDED LOAD FOR UNKNOWN REASON FELL TO GROUND HITTING EMPLOYEE.
EMPL CAUGHT IN CONVEYOR BELT.
EE REPORTES HE FELL OFF FEEDER PLATFORM CUTTING HIS KNEE AND HAND.
EE REPORTS HE BUMPED HIS ARM AGAINST SCREEN GUARD, CUTTING IT.
EMPLOYEE REPORTS THAT WHILE IN DRYER, HE CUT HIS FINGER.
HE WAS HAND CLEANING AND PAINTING CEMENT WALLS AND NOTICED SWELLING IN HIS RIGHT WRIST AREA.
EMPLOYEE REPORTS THAT WHILE WORKING ON CONVEYOR, ROLLER FELL ON HIS TOE.
EE REPORTS WHILE WORKING ON CLAMP, CLAMP SLIPPED, HITTING HIM IN MOUTH.
EMPLOYEE REPORTS WHILE HAMMERING, CUT FINGER ON PIECE OF METAL.
EMPLYEE REPORTS WHILE WORKING ON LINER JOB, HE BRUSHED AGAINST LINER CAUSING A METAL SLIVER TO GO INTO HIS RIGHT THIGH.
EE REPORTS WHILE WELDING ON TAILING BOX, EE STRUCK ARCH WITH WELDER AND AN EXPLOSION OCCURRED.
EE REPORTS WHILE WELDING ON TAILIN BOX, AN EXPLOSION OCCURRED.
EMPLOYEE REPORTS WHILE RUNNING BUFFALO MACHINE, HE SMASHED HIS RIGHT THUMB.
EE REPORT THE SHEER DROPPED, SMASHING FINGERS.
EE REPORTS WHILE SHARPING KNIFE, CUT FIFTH RIGHT FINGER.
EE REPORTS WHLE HITTING MELT WITH HAMMER, FELT SOMETHING HIT THUMB
EMPLOYEE REPORTED THAT WHILE CUTTING A CONDUCTORTRAY CABLE, HE CUT HIS RIGHT HAND.
EE REPORTS WHILE REPLACING ACCUMULATOR, LINES TO CYCLINDER HOSE CAME OFF HITTING EE IN LOWER LIP.
EMPLOYEE REPORTS WHILE SITTING ON FENDER OF TRUCK WORKING ON ENGINE, HE FELL, HITTING THE CONCRETE BELOW.
EE REPORTS WHILE REMOVING NUT WITH IMPACT WRENCH, WRENCH SPUN OFF HITTING EMPLOYEE'S FINGER.
EMPLOYEE REPORTS WHILE POUNDING A WEDGE INTO THE CHUTE, HE MISSED THE WEDGE AND PINCHED HIS FINGER BETWEEN THE CHUTE AND HAMMER HEAD.
EMPLOYEE REPORTS WHILE RETRACTING BOOM, FINGER GOT CAUGHT IN BOOM.
EMPLOYEE ON A 4 WHEELER COLLIDED WITH A PICKUP TRUCK.
EE REPORTS WHILE PUSHING ENGINE SIDE PLATE TO FRAME OF TFP, CAUGHT FINGER IN BETWEEN BOTH PIECES.
EE REPORTS WHILE REPAIRING LINERS, HE GRABBED A LOOSE BOLT CUTTING HIS LEFT SECOND FINGER.
EE REPORTS HE WAS WALKING UP A HILL, ROCK FROM AHEAD ROLLED DOWN AND STRUCK HIM IN THE LEG. WAS NOT A REPORTABLE INJURY UNTIL 10-17-96 INJURY BECAME INFECTED.
EE REPORTS HE WAS SHOVELING ROCK AND TWISTED TO THE LEFT. FELT PAIN IN BACK.
EMPLOYEE WAS CUTTING REBAR ON THIS JOBSITE. HE HAD TORCH IN RIGHT HAND AND REACHED OUT AND PUSHED A PIECE OF CONCRETE ABOUT CHEST HIGH. THE PIECE HE PUSHED SPUN AROUND AND MADE CONTACT WITH HI S LEFT FOREARM RESULTING IN A CUT APPROX. 3 1/4" LONG AND REQUIRING 11 STITCHES.
EMPLOYEE WAS TRYING TO HOOK UP A WELDING MACHINE TO A TRUCK BY HIMSELF WHEN A WELDING MACHINE FELL AND THE TONGUE OF THE MACHINE LANDED ON HIS RIGHT FOOT JUST BEHIND HIS STEEL TOE.
EE REPORTS A COMEALONG BROKE OFF AND STRUCK HIM ON THE ELBOW AND HIP. EE WAS NEXT TO THE CRUSHER WHEN THE COMEALONG CAME OFF.
PERSON WAS WORKING AROUND A PLACE WHERE SOMEONE WAS WELDING AND LOOKED AT ARC.
EE WAS PUTTING AWAY A CAN OF WELDING ROD IN A GANG BOX. THE WELDING ROD CAN HAD A POP TOP LID. WELDING ROD CAN WAS NOT CUT OPEN BY GRINDER. WHEN PLACING CAN IN GANG BOX THE LID CUT EE FINGER. EE MUST WEAR GLOVES AROUND SHARP OBJECTS.
WHILE REMOVING DUCT EMPLOYEE CUT ONE PIECE APART AND ANOTHER PIECE OF DUCT WORK THAT WAS RUSTED BROKE LOOSES AND FELL ON HIS RIGHT WRIST.
EMPLOYEE REPORTS WAS CROSS BREAKING STARTER SHEETS, GOT HIS FINGER IN A PINCH POINT BETWEEN CROSS BREAKING AND 2ND TABLE.
EE REPORTS THAT HIS FOOT SLIPPED OFF GRATING WHEN HE STEPPED DOWN.
EE REPORTS WHILE SHOVELING ROCKS AT THE MET. LEB, HER BACK BEGAN TO HURT.
EMPLLOYEE REPORTS HE WAS PULLING PIPE OFF TRUCK AND PIPE END HIT HIS NOSE, HE IMMEDIATELY APPLIED COLD PACK TO AREA.
EMPLOYEE REPORTS HE WAS PREPARING TO GET DOWN FROM THE PIPE RACK AND HE DISCONNECTED HIS SAFETY BELT AND STUMBLED ON A PIPE AND FELL APPROX. 20 FT.
EE REPORTS CABLE WAS CHOKED AROUND SHAFT AND WAS REMOVING CABLE, CABLE JUMPED LOOSE AND HIT HIS FINGER.
EMPLOYEE REPORTS HIS JOB INCLUDES SLAPPING SHEETS OF COPPER. NOTICED FOR PAST WEEK RIGHT FOREARM FROM FINGERS TO ELBOW SORE, WRAPPED IN ACE WRAPTHIS MORNING WAS SLAPPING SHEETS AND FELT PAIN IN RT FOREARM, ARM WENT NUMB FINGERS TO ELBOW AND REMAINED NUMB.
EE REPORTS WHILE INSTALLING AUTO MILL LINERS THE BAR BROKE ALLOWING THE LINER TO FALL ABOUT 2 FEET TRAPPING HIS BAR AGAINST HIS LEFT LEG.
EMPLOYEE REPORTS THERE WAS A FIRE IN THE CABINET THAT HE WAS WORKING ON. IT CAUSED HIM TO RUN AND HE INJURED HIS WRIST WHILE DOING SO.
EMPLOYEE REPORTS AN ARC STARTED IN TEH SW GEAR WHILE ELECTRICIANS WERE WORKING ON IT.
ORGANIC REAGENT MIXED WITH ACID MIST SUPPRESSANTS CAUSING A MINER EXPLOSION. NO DAMMAGE AND NO INJURIES.
EMPLOYEE REPORTS WHILE CLEANIGN B CUT FILTER SCRAPER, ALUMINUM PLATFORM STORED ON CATWALK FELL AND AS SHHE TRIED TO PICK IP UP, PULLED BACK MUSCLE.
EMPLOYEE REPORTS WHILE TRYING TO REMOVE A ROLLER FROM UDNER A VFD, THE VFD SLID OFF OF THE PRY BAR THAT HE WAS HOLDING, SMASHING HIS THUMB AND FINGER UNDER A PIECE OF CONDUIT THAT HE WAS USING TO REMOVE THE ROLLER.
EMPLOYEE REPORTS HE WAS PUSHING LOADED WHEEL BARROW WHICH SLIPPED SIDE WAYS DRIVING THE HANDLE INTO KNEE PUSHIN GKNEE MEDIALLY AND HE WENT DOWN ONTO LEFT KNEE.
EMPLOYEE REPORTS WHILE CUTTING RUBBER TRUNNION LINER WITH POCKET KNIFE THE KNIFE SLIPPED & CUT HIS LEFT HAND
EE REPORTS HE WAS SHOVELING OFF AN OVERLOADED BELT #6 AND WHEN FINISHED, CLIMBED OFF BELT AND STRUCK LEG AGAINST A ROLLER RUPPORT BRACKET.
EE REPORTS WHILE USING A JACK TO REMOVE THE BOWL LINER FROM A CRUSHER BOWL, A 1 INCH THICK X 8 INCH SQUARE SHIM FLEW OUT WHEN THE BOWL FELL OUT.
EMPLOYEE REPORTS WHILE STEPPING DOWN FROM STINGER TRUCK, HE MISSED THE BOTTOM STEP ON FUEL TANK,HIS KNEE BENT BACKWARDS AND IT POPPED.
EMPLOYEE REPORTS HE WAS RIGGING A CHOKER ON SCREEN DECK SIDE LOCATED ON BACK OF STINER, RIGHT REAR OUT RIGGER PINNED LEFT FOOT.
EE REPORTS THAT HIS LEFT ARM WENT THRU A TROUGHING IDLER WHILE EE WAS INSPECTING IDLERS ALONG THE CONVEYOR.
EMPLOYEE WAS HANGING 4" PIPE AT PIPE RACK. LIFTED THE PIPE & FELT SOMETHING PULL IN GROIN AREA. THIS OCCURRED ON 11-9-93 AT 1:00PM & WAS NOT REPORTED UNTIL 8:00AM 11-10-93.
EMPLOYEE WAS WORKING IN MCC ROOM IN MILL TURNED TO GET INTO A BETTER POSITIONS AND TWISTED RIGHTKNEE.'
WAS CHANGING BUSHING BIT ON CHIPPING GUN DID NOT SHOT AIR SUPPLY BUSHING BIT BROKE(SHARP PART) & STRUCK EMPLOYEE SAFETY GLASSES RIM OF SAFETY GLASSES CAUSED LACERATION UNDER RT EYE
WALKING DOWN STAIRWELL IN THE MILL FEET SLIPPED FROM UNDER HIM & FELL THREE STEPS CAUSING CONTUSION TO LEFT HIP
EMPLOYEE WAS LIFTING ALIGMENT IDLERS AND FELT BURNING SENSATION AROUND BELLY BUTTON.
WAS PUTTING IN GROUT FORMS FOOT SLIPPED AND BUMPED LEFT RIBS AGAINST PIPE FLANGE AND CLINIC DR DIAGNOSIS BRUISE LEFT RIB CONTUSION.
EMPLOYEE WAS REMOVING CONCRETE FORMS FROM CONCRETE WALL PUSHED FORM WITH RT KNEE & INJURED THE KNEE NO EQUIPMENT WAS INVOLVED PUT ON KNEE BRACE & AWAITING FURTHER REPORTS FROM DOCTORES
PULLING CONVEYOR TABLE...CABLE BROKE & HIT EMPLOYEE ON RIGHT CALF. INJURY WAS BRUISED RIGHT LOWER LEG CALF MUSCLE. EMPLOYEE WAS PLACED ON 3 DAYS OF RESTRICTED WORK BY DR.
EMPLOYEE REPORTS THAT WHILE CUTTING EDGE RUBBER, END OF SCRISSORS SNIPPED FINGER.
EMPLOYEE REPORTS THAT HE WAS OPERATING A CAT PUSHING MATERIAL WHEN HE BACKED UP HE STATED THAT HE FELT SOMETHING SNAP & A SHARP PAIN START ED IN HIS BACK
WORK CREW WORKING ON AND AROUND 5 KV SWITCHGEAR LINE-UP. ALTHOUGH CAUSE NOT CLEAR, THE MAIN 5KV BUS INSIDE THE LINE-UP APPARENTLY SUSTAINED A LINE OT GROUND FAULT WHICH MANIFESTED ITSELF AT T HE END OF THE BUS. ONE MEMBER OF THE THREE MAN WORK CREW, UPON HEARING HTE INTERNAL FAUL, CAME DOWN THE LADDER IN A HURRY TO EXIT THE ROOM. IN SO DOING HE LANDED HARD ON HIS RIGHT FOOT.
HANGING STURCTURAL IRON ON GRINDING LINE #1 THUMB SMASHED BETWEEN CONVEYOR TABLE AND COLUMN.
EMPLOYEE REPORTS HE WAS INSTALLING BEARINGS ON A 27/16" X 42" SHAFT WHICH WAS ON A WORK TABLE AT WAIST LEVEL, HE RAISED ONE END OF THE SHAFT WITH HIS LEFT HAND, HE SUDDENLY FELT HIS BACK START HURTING. TOTAL WEIGHT OF SHAFT APPROX. 45 LBS.
EE WAS PULLING WIRE CABLE DURING SHUTDOWN EE LEFT AT END OF SHIFT 700 PM BUT DID NOT FEEL LOWER BACK PAIN UNTIL AROUND 300 AM THAT NIGHT EE WENT TO CLINIC 5-18-93 DIAGNOSIS LOWER BACK STRAIN A ND WAS PLACED ON RESTRICTED WORK.
EMPLOYEE REPORTS THAT THE STRIPPING RACK FOR COPPER CATHODE PRODUCED ON STAINLESS STEEEL BLANKS BROKE WHILE CATHODE WAS BEING STRIPPED.
EMPLOYEE REPORTS THAT WHILE CLIMBING OVER THE HANDRAIL OF #2 DROPBOX BANK #4 HE SAID HE FELT A PULL HE THEN TRIED TO STRIGHTEN OUT & SAID HE COULDNT TOO MUCH PAIN
EMPLOYEE REPORTS A SMALL FRAGMENT OF MATAL CHIPPED OFF PIN & PENETRATED RIGHT SHOULDER.
EMPLOYEE REPORTS THAT WHILE USING THE 190 LOADER TO MOVE THE CRUSHER CAR, THE TONGUE OF THE CART WAS PINNED IN THE HITCH OF THE LOADER, THE TONGUE WAS WEDGED AND THE EMPLOYEE PRYED IT LOOSE, T HE TONGUE FELL ON THE EMPLOYEE'S FOOT.
EMPLOYEE REPORTS THAT THEY WERE LINING UP A PIECE OF STEEL TO BEND. I.NAME WAS INCHING DOWN CLAMPING DEVICE. INJURED WAS MAKING AN ADJUSTMENT TO THE PLATE WHEN I.NAME MOVED THE CLAMP DOWN ON T HE PLATE PINCHING INJURED'S FINGER.
EMPL USING A RAZOR KNIFE WAS ON THE CATWALK. BENT OVER TO PICK IT UP AND FELT BACK TWEAK. AT THIS POINT,I.NAME FELT IT WASNT NECESSARY TO GO TO THE CLINIC.
EMPLOYEE REPORTS WHILE FEEDING STARTER SHEETS TO LOOPING MACHINE WHILE FEEDING PATCH, ACCIDENTLY HIT PEDDLE PUNCHER, CRUSHED RIGHT INDEX AND MIDDLE FINGER.
EMPLOYEE REPORTS WORKING WITH COPPER SHEETS SMASHED RT THUMB BETWEEN BAR & SHEET RESULTING IN LACERATION OF RT THUMB
EE REPORTES RAN INTO THE X BEAM AT HEAD LEVEL. THE FOREHEASD STRUCK THE BEAM KNOCKING OFF HIS HARDHAT AND SENDING HIM TO THE GROUND.
EMPLOYEE REPORTS AT #5 AUTO MILL A PART OF LINER FELL AND LACERATED RIGHT THIGH ABOVE THE KNEE.
EMPLOYEE REPORTS PULLING THE BLADE OUT OF THE KNIFE,THE KNIFE HANDLE SLIPPED AND SHE SUSTAINED A CUT ON THE MIDDLE FINGER,LEFT HAND.
EMPLOYEE REPORTS WHILE MOVING A PULLEY, THE PULLEY ROLLED OFF FORKLIFT. EMPLOYEE TRIED TO STOP THE PULLEY FROM HITTING BOWL LINER.
EMPLOYEE REPORTS WHILE WORKING ON MOTOR IT FELL AND HE ATTEMPTED TO GRAB IT WITH HIS HAND SUSTAINING AN INJURY OF THE WRIST. CONFIRMED AS OCCUPATIONAL ILLNESS 07-09-91.
EMPLOYEE REPORTS CARRYING A BOTTLE WITH NITRIC ACID FULL STRENGTH,THE BOTTLE BROKE AND ACID SPLASHED HER ON THE LEGS.SHE IMMEDIATELY RAN TO THE SHOWER,TOOK HER PANTS OFF AND IRRIGATED THE BURN
EE REPORTS STEPPED ON SOME ROCKS AND TWISTED RIGHT ANKLE.
EMPLOYEE REPORTS WHILE MOVING A PLASTIC PIPE FUSING MACHINE, THE DIES WERE OPEN, THE DIE CLOSED ON HIS THUMB.
STRIPPING RUBBER CABLE BROKE BELT CLAMP HIT HARD HAT
EMPLOYEE REPORTS TAKING OFF NUTS WITH IMPACT WRENCH, SMASHED RIGHT THUMB BETWEEN IMPACT WRENCH AND BEAM.
EMPLOYEE REPORTS CAUGHT RIGHT 4TH DIGIT BETWEEN ACETALYNE TANKAND SAFETY SCREEN.
EMPL REPORTS CAUGHT LEFT 3RD DIGIT BETWEEN 2 CATHODES AT SX PLANT.
EMPLOYEE REPORTS WHILECHNGING FORKS ON A FORKLIFT HE CAUGHT HIS FINGER BETWEEN FORKS AND THE FORKLIFT.
EMPL SLIPPED ON WET CONVEYOR BELT,TWISTED LEFT KNEE.
EMPLOYEE REPORTS WHILE CLEANING A LIME STORAGE TANK, HE STRUCK AGITATOR SHAFT WITH A SCRAPER AND SOMETHING STRUCK HIS EYE.
EMPLOYEE REPORTS WHILE INSTALLING A MAN BASKET ON A FORKLIFT, HE PULLED A MUSCLE.
EMPLOYEE REPORTS CUTTING RUBER WITH KNIFE AND LACERATED TOP OF LEFT HAND.
EMPLOYEE REPORTS CLEANING LIME TANK WHEN, FROM 10 FEET ABOVE, A 200 LB. PIECE OF DRY LIME FELL AND HIT HIM ON THE LEFT LEG.
EMPLOYEE REPORTS PRYING A LINER LOOSE WITH A BAR. BAR STRUCK HIM ON MOUTH.
EMPL SETTING UP SCAFFOLDING WHEN FINGER WAS CAUGHT BETWEEN X-BRACE AND A BEAM.
EE WAS HELPING TO RIG STIFFENERS IN AUTO MILL SHELL WHEN THE LOAD SHIFTED AND EE S HAND WAS CAUGHT BETWEEN THE LOAD AND THE SHELL.
EMPLOYEE REPORTS EMPTYING TRASH BARRELS INTO TRUCK, STEPPED INTO A HOLE AND TWISTED BACK.
EMPLOYEE REPORTS SHE HAD JUST GOTTON OFF OF THE HEADER AND WAS WALKING ALONG THE BERM OF THE TAILINGS POND AND HER FOOT SLIPPED ON SOME UNSTABLE TAILINGS.
EMPLOYEE REPORTS PRYING WITH A BAR - BAR SLIPPED CUTTING RIGHT 5TH FINGER.
EMPLOYEE REPORTS CUTTING INSULATION WITH POCKET KNIFE LACERATING LEFT AHND.
EMPLOYEE REPORTS UNPLUGGING A CHUTE WHEN SOME OF THE BALLS ROLLED DOWN AND HIT HAND.
EMPLOYEE REPORTS CUTTING A BELT, KNIFE SLIPPED AND CUT RIGHT KNEE.
EMPLOYEE REPORTS STRIPPING STARTER SHEET AND HIT KNEE OF STARTER SHEET.
EMPLOYEE STATES THAT HIS RECENT LUNG SURGERY MAY HAVE BEEN AS A RESULT OF PULMONARY SILICOSIS.
EMPLOYEE REPORTS AT SX PLANT INSTALLING STARTER SHEET IN COMMERCIAL CELL. STARTER SHEET HUNG UP. HE JIGGLED IT AND IT FELL, CUT THROUGH GLOVE INTO LEFT INDEX FINGER.
EMPLOYEE REPORTS AT MOLY BAGGING SCALES-STEPPED OFF OF PLATFORM STEP ONTO WET SPOT ON FLOOR AND FELL.
EMPL REPORTS PUNCHING HOLE IN PIECE OF STRAP WHEN PUNCH WENT DOWN FINGER WAS BETWEEN FLAT STRAP & BRACE.
EMPLOYEE REPORTS AT SOUTH END OF TAILINGS POND, BOAT WAS GOING ABOUT 15 MPH AND HIT A SANDY SPOT, THROWING HER AGAINST FRONT OF BOAT.
AT ZINC POURING BUILDING STEPPED INTO MANTLE HOLE ON ZINC CART.
EMPLOYEE REPORTS THAT HE STEPPED OVER AN AIR VENT AT TOWER 53A, HE STEPPED ON A WET AREA AND SLIPPED AND FELL 8 FT ON THE TAILINGS BERM ON HIS BACK.
EMP. REPORTS AT MILL RECLAIM RESERVOIR GOT OUT OF TRUCK,, TRIPED ON ROCK AND RIGHT HAND STRUCK ROCKS.
EMPLOYEE REPORT8 DROPPED PUMP BOWL ON LEFT FOOT. PUMP BOWL WEIGHS APPROX. 50-60 LBS.
EMPLOYEE REPORT8 WORKING ON OVERHEAD DOORS WHEN DOOR WAS ROLLED UP, HIS FINGER WAS ON RAIL AND RIGHT INDEX FINGER WAS SMASHED.
EMPL REPORTS AT3#2 BALL MILL ON GRINDING FLOOR,THREW FLASHLIGHT TO CO-WORKER FELT PAIN IN BACK.
EMPLOYEE REPORT8AT CONCENTRATOR M.C.C.-WAS MOVING PORTABLE AIR COMPRESSOR FROM TRUCK TO M.C.C. BELIEVES HE INJURED BACK WHEN PUSHING COMPRESSOR
EMPL REPORTS AT3#2 FLOAT FLOOR BY OK CELLS WALKWAY.TRIPPED GOING UP 3 STEPS.
USING COME-A-LO3G WHEN CHAIN SNAPPED AND HIT ARM.
AT MOLY PLANT O3 LADDER TO CLOSE VALVE,LADDER SLIPPED FROM UNDER HIM AND FELL 6' LANDED ON RIGHT SIDE.
EMPLOYEE REPORT8 WHILE LOWERING CONVEYOR ROLLER DOWNSTAIRS,SLIPPED,CAUGHT HANDRAIL AND ROLLER CAUGHT FINGER BETWEEN ROLER AND HANDRAIL.
EMPLOYEE CARRYI3G LUMBER TO AIR BOAT DOWN A HILL, SLIPPED ON LOOSE MATERIAL AND FELL ON HIS BACK LANDING ON HIS TAILBONE.
EMPLOYEE REPORT8 AT 1 SCREEN DECK, TWISTED BACK GETTING OUT OF THE CHUTE, PULLED SELF UP WITH ARMS, WAS NOT PAINFUL AT TIME, BUT WHEN STARTING DOWN FOR BREAK, GOT SHOCKING TYPE PAINS IN LUMBAR OF RIGHT SIDE 2F BACK.
AT AUTO MILL #13ON OUTSIDE OF MILL,PUT FINGER IN LINER BOLT HOLE AND BOLT SMASHED HIS FINGER.-PER CALL BOLT SHOVED THROUGH FROM OTHER SIDE,NOT RUNNING,1/4'' TIP INVOLVED RETURNED TO LIGHT DUTY 7-25-86. 3
EMPLOYEE REPORT8 WORKING CYCLONES ADAPTOR PLATE FELL ON TOP OF FOOT
EMPLOYEE REPORT8 WHILE CLEANING A CELL EMPLOYEE WAS GRIDING THE STIFFBACK INSERTING CATHODES WHEN HIS FINGER WAS TRAPPED BETWEEN THE STIFFBACK AND THE SHORTBAR
EMPLOYEE REPORT8 AT LAYDOWN YARD, SHAFT WAS ON STINGER BOOM-SWUNG INTO LEFT LEG, CAUGHT BETWEEN SHAFT AND METAL BOX.
EMPLOYEE REPORT8 AT TAILINGS POND MAIN SHACK, REACHED UP AND PUT UP HIS KEYS, AS HIS LEFT HAND CAME DOWN HE GOT IT SNAGGED ON A NAIL NAIL WAS RUSTY.
EMPLOYEE REPORT8 AT #4 CROSS CONVEYOR MCC BUILDING, STARTING CHECKING A CIRCUIT, TOUCHED METER PROBED TO FUSE, AND AN ELECTRICAL FLASH OCCURRED, BURNING UPPER BODY.
EMPLOYEE REPORT8 HALFWAY DOWN 3 CROSS COUNTRY CONVEYOR BELT CLIMBED OVER BELT TO SET THINGS ON OTHER SIDE LEFT FOOT SLIPPED AND RT ANKLE TWISTED INWARDS
EMPL FELL OFF B5CK OF 10 TON STINGER TRUCK INJURING RIGHT FOOT.
EMPLOYEE REPORTS LOST CONTROL OF 4 WHEELED VECHICLE WHILE DECENDING ALONG SIDE #4 XCC ACCESS ROAD FELL WITH RT HAND EXTENDED AND HIT RT K NEE
EMPL UNPLUGGING FEED CHUTE IN #3 AUTO WHEN ROCK CAME DOWN HITTING BAR HE WAS USING AND SMASHING FINGER BETWEEN BAR AND CHUTE.
EMPLOYEE STATES HE WAS ROLLING UP WELDING CABLE FINGER GOT CAUGHT IN CABLE REEL
EE CLAIMS HE WAS MOVING MOLY DRUMS & SLIPPED BACKWARDS LANDING ON CEMENT WITH BACK AGINST THE WALL. HE GOT UP & STARTED TO WROK, AS HE DID NOT FEEL HE NEEDED MEDICAL ATTENTION AT THAT TIME.
EMPLOYEE CLAIMS WHILE PUTTING FUEL IN FORKLIFT; NECK ON FUEL TANK TOO SMALL. FUEL BLEW BACK INTO FACE.
EMP WAS ATTEMPT3NG TO REMOVE A MIXER SHAFT FROM AN ELECTRIC MOTOR USING A PIPE QRENCH WITH THE HELP OF ANOTHER EMPLOYEE. THE OTHER EMPLOYUEE PLUGGED IN THE MOTOR WHILE SHE WAS HOLDING ON THE P IPE WRENCH CAUS3NG IT TO FLIP AROUND AND HIT HER RIGHT ARM
EMPLOYEE STATES WHILE PULLNG STARTER BLANKS, A BLANK FELL ON FINGER WHILE TRYING TO PUT IT ON STIFF BALK HOOKS. NOTE: EMPLOYEE WAS WEARING GLOVES.
EMPLOYEE CLAIMS INJURED LEFT WRIST WHEN SHE STEPPED BACKWARD INTO A RUT, LOOSING HER BALANCE WHILE UNLOADING PALLETS, LANDED ON LEFT ARM TRYING TO BREAK FALL.
EMPLOYEE CLAIMS WHILE MIXING MOLY WITH BARREL CART, SLIPPED ON WET FLOOR AND FELL BACKWARD STRIKING HEAD ON CEMENT FLOOR ANDCUTTING SCALP.
EMPLOYEE CLAIMS WHILE TIGHTENING BOLTS OVERHEAD ON AUTO MILL FOOT SLIPPED CAUSING GLANCING BLOW TO HIS HEAD BY AIR WRENCH
EMPLOYEE CLAIMS HE PINCHED HIS RIGHT LITTLE FINGER WHILE USING A CHEATER BAR TO OPEN A VALVE
HIT BY A DOUBLE SLEDGE HAMMER ON RIGHT EYEBROW.
WORKING ON FLOW DIVIDER AND CHLONNALED SOLVENT SPRAYED INTO EYES.
PICKED UP PIPE WITH WATER IN IT AND INJURED LOWER BACK.
INSTALLING VACCUMM HEAD ON FILTER AND PLATE FELL ON RIGHT FOREARM
PUSHING LEVER INTO A CHUTE
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF with the underlying data as CSV.