PIKE VIEW QUARRY: 201 citaciones de la MSHA Metal/Non-Metal

While walking from EE's pickup to the shop, the miner felt something snap in EE's right calf. EE's leg gave out and EE fell to the ground. The miner suffered a right calf strain and placed on walking restrictions.

While moving screen mesh from storage, the screen mesh slipped and smashed the miners right middle finger causing a contusion. The miner was wearing gloves, hardhat, and safety glasses during the incident.

Miner was walking down a ramp and tripped on something causing them to fall down stairs of a cone screen. Miner said they were not sure what they tripped on and there was no debris on the walkway. Miner fractured right ankle after the fall. Miner fell approximately 4-6 steps from the landing. The miner was not carrying anything during the incident.

Individual was clearing dirt around the plant with a skid loader when loader hit a large rock. This pushed employee forward into the safety bar causing a bruise to chest on the left side. Individual was wearing a seatbelt.

EMPLOYEE WAS WALKING ON CONCRETE SIDEWALK WHEN HE STEPPED ON A ROCK AND IT SLIPPED CAUSING HIS ANKLE TO ROLL, RESULTING IN A STRAIN / SPRAIN OF THE LEFT ANKLE

WHILE WALKING THE PLANT DURING STARTUP, A RANDOM ROCK BOUNCED OFF OF THE SCREEN DECK HITTING HIM ON THE HARDHAT AND LANDING ON HIS SHOULDER RESULTING IN A CHIPPED CLAVICLE.

miner was standing on excavator track and while closing the door, fell off and struck his head on the ground causing lacerations to his head and hand. head laceration required eight sutures.

miner was cutting rail rubber when the knife slipped and cut his thumb, requiring medical attention and received five sutures.

Employee was standing on a ladder, shifted his weight and his knee popped causing minor knee strain.

Employee was moving piece of equipment when it struck the arm of the second employee causing bruise.

Employee missed a step exiting truck landed on shoulder.

Employee was cutting a hose with a utility knife, the knife slipped and cut the knuckle of left index finger.

EMPLOYEE WAS ADDING AN EXTENSION TO THE WATER TRUCK SPRAY BAR. HE HAD REMOVED THE SPRAY BAR & CLAMPED IT INTO A VISE & WAS TIGHTENING ON A NEW SECTION. THE PIPE SLIPPED OUT OF THE VISE & STRUCK EE IN THE HEAD. EE RECEIVED A CUT & SLIGHT CONCUSSION. LOST TIME.

EE WAS CLEARING A JAM IN THE FEEDER. HE WAS STRIKING THE JAMMED ROCKS WITH A SLEDGE HAMMER. WHEN THE JAM BROKE LOOSE THE HAMMER WAS STRUCK BY THE FALLING ROCKS. EE WAS TRYING TO NOT LOSE THE H AMMER AND THE HAMMER TWISTED AND JARED IN HIS HAND CAUSING A STRAIN TO HIS FOREARM. RESTRICTED DUTY.

EE WAS CHANGING BELTS ON THE JAW CRUSHER, HE DECIDED TO CLIMB ONTO THE FRAME TO GET A DIFFERENT ANGLE TO WORK AND FELL OFF THE FRAME ABOUT 2 OR 3 FEET TO THE GROUND. HE HIT HIS CHEST/SHOULDER ON THE GROUND, RECEIVING A CONTUSION. EE RECEIVED RESTRCTED DUTY STATUS WHILE HEALING.

EE INITIALLY REPORTED A PAIN IN HIS GROIN AREA, 7-15-03 THOUGHT IT MIGHT BE A HERNIA, HE WENT TOTHE DR. WHO THOUGHT IT WAS A YEAST INFECTION, TREATMENT FOR A YEAST INFECTION DID NOTHING ON 8-12-03 THE DR. DECIDED THAT IT IS A WORK RELATED" HYDROCELE"

LOADER OPERATOR WAS SCALING THE BENCH. A ROCK FLIPPED OUT OF THE BUCKET, AND CAME THROUGH THE WINDSHIELD. THE ROCK PRESSED ON THE R STEERING JOYSTICK AND CAUSED THE LOADER TO REVERSE DIRECTION AND TURN AT THE SAME TIME THE ROCK WAS PRESSING ON THE OPERATOR'S LEG WHICH CAUSED HIM TO ACCELERATE. OPERATOR STRUCK THE OPPOSITE BENCH. APPEARED TO LOSE CONSCIOUSNESS MISSED 1 DAY OF WORK.

MINER WAS LOADING ROLLERS INTO A PICK UP TRUCK AND CAUGHT HIS HAND BETWEEN A ROLLER AND THE BED OF THE PICK UP. STITCHES REQUIRED.

EE WAS SHOVELING AROUND A SHUT DOWN AND LOCKED OUT CONVEYER. HIS SHOVEL HIT SOMETHING AND JAMMED HIS SHOULDER. HE SAW AN ELECTRICAL CABLE AND ASSUMED THAT HE HAD BEEN SHOCKED. (RESTRICTED DUTY AND RX MEDS) AN ELECTRICIAN WAS BROUGHT IN TO CHECK IF THERE COULD BE ANY LIVE WIRES OR VOLTAGE TO THE FRAME AND THERE WAS NONE.

EE WAS CHANGING THE TAIL PULLEY ON THE SCALPER BELT. AS HE ALIGNED THE PARTS THE TAIL PULLEY SLIPPED AND CRUSHED HIS HAND. THERE WERE NO BROKEN BONES BUT THE LACERATION REQUIRED 8 STITCHES.

EE SLIPPED WHILE CHANGING SCREENS AND FELL OFF THE SCREEN.

EE WAS REMOVING A CUTTING EDGE BOLT, THE BOLT BROKE, FLEW UP AND HIT HIS HEAD. HIS HEAD WAS CUT REQUIRING 5 STITCHES TO CLOSE.

THE OPERATOR HAD BEEN OPERATING HIS FRONT END LOAD ALL MORNING. HE GOT OFF FOR LUNCH AND FOR AN UNKNOWN REASON TOUCHED A RIPPER TOOTH. THE TOOTH WAS VERY HOT AND THE OPERATOR RECEIVED 1ST & 2N D DEGREE BURNS TO HSI HAND.

ROCKS IN THE LOADING HOPPER JAMMER UP, EE SHUT DOWN THE PLANT AND CLIMBED ONTO THE ROCKS TO FREE UP THE JAM. AS HE CLIMBED ACROSS THE ROCKS HE TWISTED HIS FOOT. EE DID NOT THINK HE HAD A SERIO US INJURY AND DID NOT REPORT IT.

EE STEPPED ON A RUSTY NAIL WHILE GETTING NERW ROLLERS FROM THE BACK OF THRE SHOP, PUNCTURING LEFT FOOT.

RIGHT HAND WAS HIT WITH SLEDGE HAMMER WHILE HOLDING BAR TO CLEAR OBSTRUCTION ON CRUSHER.

EE HAD FINISHED HIS SHIFT AND WAS LEAVING THE QUARRY. AS HE WAS DRIVING AWAY FROM THE WORK STATION HIS THROTTLE STUCK OPEN. THE SUDDEN ACCELERATION CAUSED EE TO LOSE CONTROL OF HIS VEHICLE. HE SLID INTO THE DITCH WHERE HE THEN ROLLED OVER.

EMPLOYEE WAS OPERATING THE PLANT, HE OPENED THE DOOR OF THE CONTROL ROOM - A ROCK BOUNCED OUT OFA TRUCK, THAT WAS DUMPING INTO THE HOPPER AND STRUCK HIM IN THE TEMPLE.

WHILE RUNNING A DOZER, EE PULLED A BACK MUSCLE. HE THOUGHT HE WOULD BE ALL RIGHT, BUT THE PAIN CONTINUED UNTIL HE SAW A DR ON 2/18/98

EE WAS CUTTING RUBBER FLASHING FOR SCREENS USING A RAZOR KNIFE.

EE WAS STANDING NEAR THE SIDE OF CAT EXCAVATOR WHICH WAS BEING OPERATED BY OTHER A DRAINAGE DITCH, WHEN A SMALL PROJECTILE STRUCK HIM IN THE STOMACH-RESULTING IN A PUNCTURE.

EMPLOYEE WAS LOOSENING SOME SHELVING IN THE MAINTENANCE SHOP - SHE STRAINED HER HAND.

EE WAS REMOVING A HEAVY GUARD FROM THE PLANT (P-3 PROPER SAFETY SHURDOWN PRECEDURES WERE IN PLACE) WHEN THE GUARD FELL AND THE CORNER LANDED ON HIS KNEE--CUTTING IT.

EE WAS WORKING ON THE JAW, PUTTING CHEEK BOLTS IN WHEN DIRT AND SMALL ROCKS FELL AROUND HIM, RESULTING IN DIRT IN HIS RIGHT EYE. HE THOUGHT IT WOULD BE ALL RIGHT, SEVERAL DAYS AFTER HE REPORTE D HIS INJURY TO HIS SUPERVISOR, ON THE 21ST, HE WENT IN TO THE DR DUE TO AN IRRITANT STILL BEING IN HIS EYE.

EE WAS OUT OF HIS DOZER, WITH HIS SAFETY HELMET, GLASSES, AND BOOTS ON, WHEN A ROCK FELL ON HIS FOOT ABOVE HIS SAFETY TOED STEEL AREA OF HIS FOOT. HE THOUGHT LIGHTLY OF HIS INJURY UNTIL HE LOS T H8S TOENAIL ON HIS RIGHT FOOT. HE THEN DECIDED TO HAVE IT LOOKED AT ON 4-7, TO INSURE NOTHING WAS BROKEN.

EE WAS WORKING ON THE SCALPER, HELPING WITH REPAIRS, WHEN HE LOST HIS HAND AND FOOT HOLD AND FELL TO THE GROUND.

EE WAS TESTING A NEW PUMP ON DRILL WHEN THE O RING BLEW OUT, OIL HIT HIS HAND AT HIGH PRESSURE.

EE PLACED A ACK STAND UNDER THE REAR OF THE DOZER TRACK AND PINCHED HIS RIGHT THUMB, CAUSING ASEVER CUT.

EE WAS LIFTING A HEAVY PIECE OF STEEL WHEN HE STRAINED HIS BACK. EE NOTIFIED SUPERVISOR, TELLING HIM HE THOUGHT HE WAS "ALL ARIGHT", AT THE TIME. ON 8/8 HIS LOWER BACK BEGAN TO BOTHER HIM HE WENT TO THE DRS ON 8/10

EMP WAS HELPING ANOTHER EMP TO REMOVE A TROUGH ROLLER WHEN THE ROLLER SLIPPED AND CUT HIS FINGER

EMP WAS STANDING ON BELT SHOVELING WHEN THE OPERATOR TURNED THE BELT ON. EMP FELL OFF OF THE BELT INJURING HIS LEG, BRUISING THE BOTTOM PORTION AND KNEE

HE HAS BEEN SHOVELING A LOT RECENTLY AND HIS BACK BEGAN TO HURT.

EE WALKED OUT OF MAINT. SHOP AND NOTICED A STING ON HIS HAND. UPON CLOSER INSPECTION HE NOTICED IT HAD SWOLLEN.

EE WAS BEING LOADED WHEN A PIECE OF ROCK FLEW IN HER EYE.

EE WAS GREASING EQUIPMENT AT NOON--HIT HIS KNEE ON THE DUMP ARM OF EQUIPMENT #1112.

EE WAS SHOVELING UNDER CONVEYOR BELT (WEST 6X20) WHEN THE SHOVEL CAUGHT THE BELT AND THE HANDLE HIT HIM IN THE RIGHT SIDE RIB CAGE.

EE WAS OPERATING THE SKIDLOADER AND COMPLAINED OF BACK PAIN.

EE WAS OEPRATING A SKID LOADER WHEN HE WAS BITTEN BY A SPIDER AND BECAME ILL AT HOME THAT NIGHT AND WENT TO THE HOSPITAL.

EE WAS CLEANING WIPER ON BELT UNDER SCREEN, WHENA WEIGHT USED FOR TENSION, SWUNG UP & STRUCK HIM IN THE FACE & HEAR. SMASHING HIS NOSE, FOREHEAD & TOP OF HEAD.

EE WAS STANDING ON A SUPPORT RAIL. HE WAS GREASING THE PLANT, WHEN HE STEPPED ONTO THE SUPPORT RAIL, WHICH WAS BROKEN AT THE TIME, GAVE WAY CAUSING THE EE TO FALL.

4 EES WERE ON A CATWALK CLEANING OFF MUD THAT HAD COLLECTED FROM THE PREVIOUS NIGHT SHIFT. WHILE ON THE CATWALK, THE SIDE OF THE CARWALK GAVE WAY CAUSING THE EE TO FALL.

THE EPLOYEE WAS CLEANIGN PAINT OFF A PIECE OF PIPE. HE WAS USING A WIRE WHEEL. HE WAS WEARING HIS COMPANY ISSUED SAFETY GLASSES. THE WIRE WHEEL IS PART OF A GRINDER, IT IS AN ELECTRIC POWERE D EQUIPMENT.

THE EMPLOYEE WAS HAMMERING ON THE DOZER TRACK WHEN SOMETHING WENT INTO HIS RIGHT EYE. HE WAS WEARING HIS COMPANY SAFETY GLASSES.

EMPLOYEE DROVE HIS PERSONAL TRUCK TO THE TOP OF THE QUARRY. WHEN HE STEPPED OUT, HE FELL AND TWISTED HIS ANKLE.

EE WAS WELDING ON THE JAW FEEDER. THE COME-A-LONG BROKE & CAUSED THE EMPLOYEE TO LOSE HIS BALANCE. HE FELL 4-5 FEET & UPON LANDING INJURED HIS RIGHT WRIST.

EE WAS USING A 1"DRIVE TORQUE WRENCH TO TORQUE DOWN THE PADS ON FD-40 DOZER & HE STRAINED HIS BACK.

EE WAS USING A SLEDGE HAMMER TO UNJAM THE BOULDERS THAT WERE STUCKIN THE CONE CRUSHER. HE OVER SWUNG AND STRAINED HIS ARM.

EMPLOYEE WAS REPLACING THE BELT ON THE CONVEYOR IT HAD RAINED AND THE CONVEYOR WAS WET. UPON REACHING FOR THE BELT HE LOST HIS BALANCE & GRIP ON THE BELT AND FELL OFF. HE FELL APPROX 7 FT LANDING ON HIS FEET, BUT HURT HIS BACK.

EMPLOYEE WAS DRIVING A HAUL TRUCK THE LAODER OPERATOR WAS LOADING UP HIS TRUCK & A 10IN BOULDER CAME OFF OF THE LOADER BUCKET STRIKING T HE EMPLOYEES LEFT ELBOW WHICH WAS RESTING ON THE WIKNDO W IT FRACTURED HIS ELBOW

EMPLOYEE WAS DISMOUNTING FROM HIS LOADER & MUST HAVE STEPPED DOWN WRONG HE PINCHED A NERVE IN HIS LEFT BUTTOCK HE HAD NUMBNESS & STIFFNESS IN HIS UPPER LEFT LEG

EMPLOYEE WAS USING A BAR TO UNJAM ROCK WHICH WAS BRIDGED OVER IN THE CONE CRUSHER EE WAS HOLDING THE BAR & ANOTHER EMPLOYEE WAS HITTING IT WITH THE SLEDGE HAMMER THE OTHER EMPLOYEE MISSED THE BAR EE WAS HOLDING & STRUCK HIM IN THE RT FOREARM

THE TIRE MAN WAS CHANGING A TIRE ON A EUCLID(Q17). HE WAS JACKING UP THE TRUCK WITH A HYDRAULIC JACK. THE HOSE ON THE JACK BURST OFF HITTING HIM IN THE LEFT HAND. THE FORCE OF THE OIL BRUISED HIS HAND.

THE EMPLOYEE WAS CLEANING UP AROUND THE CRUSHER, WITH A BOBCAT. THE OPERATOR CALLED FOR ROCK & A LOAD WAS DUMPED IN THE HOPPER. A ROCK FELL OVER THE SIDE OF THE CRUSHER & LANDED ON TOP OF THE BOBCAT. THIS KNOCKED HIS HARDHAT DOWN ON HIM & PUSHED HIM DOWN IN THE SEAT. THIS AREA WAS POSTED & THE EMPLOYEE KNEW NOT TO BE IN THIS AREA.

EE WAS GRIDNING A PIECE OF STEEL AND A PIECE OF SLAG STEEL HIT HIM IN THE LEFT EYE. THE EE WAS WEARING SAFETY GLASSES.

EMPLOYEE WAS PULLING A CONCRETE FORM WITH A BOBCAT SKID LOADER. THE FORM PULLED LOOSE AND STRUCK THE BOBCAT'S BUCKET. IT BOUNCED OFF AND STRUCK THE EMPLOYEE'S RIGHT INDEX FINGER. THIS BROKE THE EMPLOYEE'S FINGER.

EE WAS WELDING ON AN IRON PLATE. HE HAD PLACED A CLAMP ON IT TO HOLD IT IN PLACE WHILE HE WELDED ON IT. THE CLAMP DID NOT HOLD IT FLEW OFF AND HIT HIM IN THE KNEE.

EMPLOYEE WAS PRYING A ROCK WHICH WAS STUCK IN THE JAW, WHEN THE BAR SLIPPED AND HIT HIM IN THE SHOULDER.

EMPLOYEE WAS FEELING NUMBNESS & NECK STRAIN DUE TO DRILLING THERE IS NO ACTUAL INJURY. INJURY OCCURED DUE TO SEVERAL YEARS OF DRILLING & LOADING THE SHOT FOR DRILLING.

EE WAS STEPPING OFF OF THE DOZER WITH HIS THERMOS IN ONE HAND AND HIS LUNCH IN THE OTHER HE LOST HIS FOOTING AND FELL LANDING ON HIS SIDE.

EMPLOYEE WAS PRYING A BOULDER IN THE JAW WHEN THE BAR SLIPPED AND STRUCK HIM IN THE FOREHEAD.

EMPLOYEE STEPPED ONTO THE TOP OF THE CONE CRUSHER TO LOOK FOR A JAMMED ROCK, THE ROCK FREED ITSELF AND REVOLVED UNDER HIM, TWISTING HIS LEFT ANKLE.

EMPLOYEE WAS DRILLING, THE STRIKER BAR WAS ABOUT FACE LEVEL. THE STRIKER BAR BROKE, AND THE DRILL KEPT HAMMERING. A SLIVER OF STEEL BROKE OFF AND WENT INTO EMPLOYEE'S CHIN. EMPLOYEE RECEIVE D FOUR STITCHES.

EE WAS PERFORMING HIS NORMAL DUTIES WHICH INCLUDE CLEAN UP AROUND THE PLANT AND RUNNING A SKID STEER LOADER AND HE FELT A SHARP PAIN IN HIS LEFT SHOULDER.

EMPL MAMMED RIGHT RING FINGER WHILE CLIMBING ON EUCLID.

EMPLOYEE WAS REPAIRING MOTOR AND THE THROTTLE STUCK AND WAS RUNNING WIDE OPEN.

EMPLOYEE WAS INSTALLING A NITROGEN TANK ON OUR WEST EL-JAY CRUSHER.THE TANK SLIPPED OUT OF THE CLAMPS HIT THE SHIELD BELOW THEN HIT EMPLOYEES RIGHT LEG.

EMPLOYEE WAS GREASING THE WEST PIONEER. HE PICKED UP THE GUARD. THE GUARD SLIPPED AND IT HIT HIS RIGHT HAND.

EMPLOYEE WAS INSTALLING FLYWHEEL IN CUMMINS ENGINE AND PULED MUSCLES IN RIBS. THE OVERHEAD LIFT IN THE SHOP COULD NOT BE UTILITZED FOR THIS INSTALLATION, AND EMPLOYEE DID NOT SEEK ASSISTANCE F ROM OTHER EMPLOYEES AS THERE WERE NONE AT THE SHOP AREA.

DRILLING HOLES BOLT LOOSE WIGGLED HAMMER, LEANED AGAINST CONTROLS WITH CHEST HAMMER DROPPED SMASHED THUMB

EE CLAIMS THE LOADERMAN DROPPED LOADER BUCKET OF SHOT ROCK INTO THE TRUCK FROM A HIGH ALTITUDE CAUSING THE TRUCK TO BOUNCE SEVERLY. EE CLAIMS TO HAVE BEEN WEARING HIS SEAT BELT, BUT DUE TO TH E SEVERE MOTION OF THE TRUCK HE WAS THROWN AGAINST THE SEAT BACK AND THE STEERING WHEEL. WITNESS STATES TRUCK WAS BACKED INTO LOADING AREA SUCH THAT REQUIRED LOADER TO LOAD OVER CABSHIELD OF T

EMPL MANUALLY REMOVING ROCK FROM HOPPER ON CRUSHER WHILE MECHANICS WERE WORK ON CATWALK BELOW THEM.EMPL LOST GRASP ON ROCK AND IT FELL BETWEEN HANDRAIL & HOPPER STRIKING MECHANIC WORKING ON LO WER LEVEL.

EMPL WAS DRIVING HAUL UNIT 02 IN QUARRY TO CARRY ROCK FROM STOCKPILE AREA BACK TO PRIMARY CRUSHER. TRUCK ALMOST CRESTED HILL WHEN ENGINE STOPPED & TRUCK BEGAN ROLLING BACKWARD. BRAKES WOULD NO T STOP NOR HOLD LOADED VEHICLE & IT ROLLED IN SEMICIRCLE COMING TO STOP WHEN IT STRUCK ROAD BERM.

INJ SELF CRAWLING THROUGH OPENING IN CHUTE

EMPLOYEE WAS PREPARING TO SHOVEL SPILLAGE FROM AROUND SCALPER SCREEN WHEN A ROCK CAME OFF THE SCREEN AND LANDED ON HIS FOOT.

EMPLOYEE HAD BEGUN REPAIR ON REAR LIGHT OF 475 MICHIGAN LOADER. HE BACKED REAR OF LOADER INTO SHOP OUT OF THE RAIN. HE LOST HIS FOOTING ON THE WET TIRE AND FELL.

ADJUSTING CONVEY PULLEY STRINGING EXT CORD, UNDER CONVEY, DUCK WALKING, STRUCK HEAD ON CONVEY

DRIVING FORM SSHOP TO OFFIE STRUCK HEAD ON BY TRUCK HAD BEEN DRIVEN ON WRONG SIDE OF ROAD

EMPL ALLEGES HE STRAINED HIS BACK WHILE FABRICATING SCREENING PLANT FRAME FRAME WAS CONSTRUCTED FROM 8" I BEAM AND OTHER MISC SIZES OF STEEL

EMPLOYEE WAS REINSTALLING LOADER WHEEL WITH IMPACT WRENCH.EXHAUST WRENCH BLEW DIRT AND DEBRIS INTO EYES.

EMPL WERE THROWING ROCKS OFF BANK DOWN I NTO LOADER AREA. ROCK FRAGMENTS ENTERED TRUCK CAB THROUGH OPEN WINDOW STRIKING DRIVER ON HEAD.

EMPLOYEE WAS CLEARING BLOCKED JAW CRUSHER BY BRAKING ROCK WITH A SLEDGE HAMMER. AFTER CRUSHER WAS CLEARED HE BEGAN TO NOTICE BACK PAIN.

EMPLOYEE ALLEGES HE WAS BENT OVER AND REACHING AROUND LEFT FRONT TIRE AND FRAME OF WABCO HAUL UNIT TO REMOVE BRAKE LINE FOR REPAIR. WHILE ATTEMPTING TO LOOSEN FITTINGS WITH WRENCH, HE EXPERIEN CED PAIN ALONG LEFT SIDE OF BODY.

EMPLOYEE WAS PLACING COPIES IN BINDER AND CUT HIER FINGER ON METAL EDGE.

MATERIAL IS CON8TANTLY SPILLING FROM BELT AND BUILDING UP.EMPLOYEE WAS MUCKING OUT SPILLAGE WITH SHOVEL WHILE BELT WAS LOADED AND RUNNING.MATERIAL STRUCK SIDE OF FRAME OF HOPPER AND FELL FROM BELT STRIKING 9MPLOYEE ON KNEE.

EMPLOYEE WAS GR9ASING TAIL PULLEY OF CONVEYOR BELT WHEN A ROCK BOUNCED OFF THE SCREEN DECK AND STRUCK HIM.

EMPLOYEES WERE 8PLICING A CONVEYOR BELT AND WERE USING A PLANK FOR BACKING. INJURED EMPLOYEE STOOD UP TO GET MORE SUPPLIES AND WALKED INTO THE CORNER OF THE PLANK.

EMPLOYEE WAS AS8ISTING IN FABRICATION OF STEEL CHUTE HE HAD FINISHED GRINDING EDGES OF A SHEET OF STEEL & WAS PREPARING TO LEAN IT AGAINST THE WELDING T RUCK WHEN HE WAS STRUCK ON RT KNEE BY A SECOND SHEET WH3CH HAD BEEN LEANING AGAINST THE TGRUCK GROUND WAS UNLEVEL & VIBRATION CREATGED BY WELDER CAUSED SHEET TO FALL VIOLATION OF 30CFR 56.16001

EMP WAS BUILDIN1 EQUIP GUARDS USING 4X8 SHEETS OF EXPANDED METAL THE EMP HAD CARRIED A SHEET OF MATERIAL UP THE STAIRWAY AND WAS ATTEMPTING TO POSITION IT WHEN HE TWISTED HIS ANKLE

EMPLOYEE WAS BR9AKING 2 INCH X 4 INCH X 8 FT LUMBER BY LEANING PIECE OF STEP BUMPER OF A TRUCK AND STANDING ON IT. THE BROKEN PIECE WERE BEING PITCHED TO ONE SIDE OF RUSE AS BRACEDS FOR THE BU LKHEAD. HE WAS 4ALKING FROM THR TYRUCK TO THE WORK AREA, STEPPED ON A PIECE OF LUMBER. HE SUFFERED HIS INJURY WHEN HE SLIPPED OFF O F THE PIECE OF LUMBER.

EMPLOYEE WAS AS8ISTING IN THE PLACEMENT OF BUILDING STONE AGAINST A BANK. HE WAS CLIMBING DOWN THE BANK TO THE WORK AREA WHEN H IS BOOT HUNG UP AND HE FELL, TWISTING HIS ANKLE. A S7AIRWAY WAS PROVIDED IN THIS AREA. BUT THE EMPLOYEE CHOSE NOT TO USE IT.

... FUELING SAL5MANDER USED TO APPLY HEAT UNDER CONV BELT BY DUMPING 5 GAL BUCKETS OF FUEL INTO RESEVOIR OF HEATER AND EXPERIENCED BACK PAIN.

EMP WAS DRIVING 4X4 PICKUP OUT OF QUARRY TO LUNCH ROOM AREA ONE OF THE TIRES ON THE STEERING AXLE STRUCK A ROCK CAUSING EMP TO LOSE CONTROL OF STEERING WHEEL

EMPLOYEE HAD CLIMBED TOT HE HEAD PULLEY GEAR BOX TO CHECK OIL LEVELS AND TO GREASE BEARINGS. THE BELT WAS WET DUE TO EARLY MORNING DEW. WHEN HE COMPLETED GREASING ONE SIDE OF THE HEAD PULLEY AND HAD BEGUN TO TURN AND GREASE THE OPPOSITE SIDE, HE LOST FOOTING AND FELL.

EMPLOYEE WAS UNROLLING WELDING LEADS FROM SERVICE TRUCK AND LAYING THEM OUT IN PREPARATION OF MAKING PLANT REPAIRS. HE STEPPED ON A ROCK, WHICH ROLLED UNDER HIS WEIGHT CAUSING HIM TO LOSE BALA NCE.

I,NAME IS EMPLOYED BY CASTLE IN THE DRILLING AND BLASTING DEPARTMENT. HIS JOB DEMANDS THAT HE HANDLE 10\ LENGTHS OF STEEL DRILL ROD EACH WEIGHING APPROX. 60 POUNDS SEVERAL TIMES PER DAY, 50 PO UND BOXES AND BAGS OF BLASTING AGENTS, AND A LENGTH OF 3" AIR HOSE (THE LENGTH VARIES WITH THE DISTANCE BETWEEN THE DRILL AND AIR COMPRESSOR). I,NAME HAS PERFORMED THIS WORK FOR CASTLE SINCE

EMPLOYEE HAD TO CHARGE BATTERIES IN WACO HAUL PACK IN ORDER FOR IT TO START.WHEN CHARGING WAS COMPLETED AND TRUCK STARTED HE TOOK THE CHARGER FROM THE TRUCK AND SET TI ON THE GROUND AND PULLED IT TO THE SHOP TO REPLACE IT.WHEN HE STOOD UP TO OPEN THE SHOP DOOR.HE FELT A SHARP PAIN IN HIS BACK.

EMP WAS ASSISTING CLEARING FROZEN MATERIAL FROM FEEDER WITH SLEDGE HAMMER HEAD OF HAMMER WENT BETWEEN RAILS OF FLOOR OF FEEDER AFTER BEING SWUNG EMP TRIED TO KEEP HAMMER FROM FALLING THROUGH

EMPL MAKING REPAIRS TO PLANT OUTSIDE.COULDNT FIND SAFETY GLASSES OR CUTTING GOGGLES SO PERFORMED TASKS WITHOUT THEM AND AS A RESULT GOT FOREIGN MATERIAL INTO EYES.

EMPLOYEE WAS ATTEMPTING TO ROLL 2" AIR HOSE AND PLACE ON COMPRESSOR TO MOVE DRILL TO ANOTHER AREA. THE HOSE HAD TWISTED AND BECAME TANGLED. WHEN HE GOT HOSE UNTWISTED IT STRUCK HIM AND KNOCKED HIM TO THE GROUND

EMPLOYEE WAS MUCKING AROUND PLANT SITE. HE HAD CRAWLED ONTO SCREEN AND WAS WALKING ALONG OUTSIDE OF CATWALK HOLD ONTO HAND RAIL TO AVOID WALKING THROUGH MUD WHEN WELD BROKE CAUSING HIM TO FAL L HE HANDED ON A SHOVEL THAT HAD BEEN DRIVEN INTO THE GROUND FOR USE IN HIS TASK.

I NAME IS A EQUIPMENT OILER. IT IS HIS JOB TO LUBRICATE ALL MOVING PARTS ON THE CRUSHING PLANT AND ON THE LOADING MACHINES. HE ALSO CLEANS SPILLED MATERIAL FROM UNDER THE PLANT EQUIPMENT ON T HE DAY, THE CONVEYOR BELTS HAD MATERIAL STICKING TO THEMN, SO A FIRE BARREL HAD BEEN PLACED BENEATH THEM. WHEN I NAME TO MOVE THE BARREL INSTEAD OF PLACING THE LID ON IT, THE BARREL TIPPED OVE

EMPLOYEE IS A DRILLER AND WORKS ON ROCK BENCHES. HE LOST FOOTING WHEN THE ROCK HE HAD STEPPED ON ROLLED FROM UNDER HIM AND HE FELL AGAINST ANOTHER ROCK.

EMPLOYEE IS A EUCLID TRUCK DRIVER HAULING SHOT ROCK FROM THE QUARRY TO THE CRUSHER THE CONSTANT BOUNCING DUE TO THE ROUGHNESS OF THE RIDE ALLEGEDLY ENDED WITH EMPLOYEE HAVING BACK TROUBLE

CONDITIONS WER WINDY WET AND MUDY EMP WAS GREASING JAW CRUSHER HE TURNED TO REACH FOR GREASE LEAK LOCATION AND TWISTED HIS KNEE WHEN HE LOST HIS FOOTAGE

EMPLOYEE WAS ASSISTING IN PLANT REPAIR HE ATTEMPTED TO TURN SHEAVE ON SHAFT OF ELECTRIC MOTOR BY PULLING ON DRIVE BELTS. WHEN THE MOTOR SPIN IT PULLED HIS HAND INTO THE PINCH POINT BETWEEN PUL PULLEY AND BELTS.

EMPLOYEES EUCLID TRUCK BROKE DOWN. HE WAS CLEANING UP AROUND PLANT WHILE WAITING FOR REPAIRS TO BE MADE. HE LIFTED A PIECE OF SCREEN CLOTH AND STRAINED HIS BACK

EMP WAS LOADING SHOT ROCK ON THE SAME BENCH AND 70-100 FEET FROM A NW 41, THAT WAS BREAKING BOULDERS WITH A DROP BALL. A PIECE OF FLY ROCK FROM THE ROCK BREAKING OPERATION SHATTERED THE WINDOW OF THE LOADER OPERATED BY THE INJURED AND STRUCK HIM ON THE RIGHT SIDE TEMPLE AREA

LUBRICATING HEAD PULLEY ON 2 RETURN CONVEYOR.UNPON COMPLETION OF THIS TASK,STOOD UP TO DISMOUNT CONVEYOR.FOOT CAUGHT ON MOUNTING BRACKET FOR CONVEYOR DRIVE MOTOR AND TWISTED KNEE.

HOPPER ON RIP RAP SCREENING PLANT PLUGGED WITH LARGE BOULDERS.EMPL ATTEMPTING PRY ON ROCK WITH W/ STEEL BAR.BAR SLIPPED CAUSING EMPL TO LOSE BALANCE AND FALL ONTO OTHER ROCKS IN HOPPER.

DRIVING R-30 EUCLID,UNIT 10,HAULING SHOT ROCK FROM QUARRY TO CRUSHING PLANT.

ATTACHED REPORT - ...OTHER EMPL BACKED EUCLID TO HOPPER TO DUMP. HOPPER WAS PLUGGED. WAITED AND SAW LARGE ROCK FALL FROM TOP OF FEEDER WHICH HE ASSUMED MEANT THE HUNG MATERIAL HAD BEGUN TO CLE AR. HE ENGAGED HOIST AND DUMPED LOAD -30 TONS- INTO HOPPER AND WENT BACK TO QUARRY. INJURED EMPLSEE ATTACHED REPORT. ...EUCLID DRIVER DUMPED LOAD OF 30 TONS INTO PLUGGED HOPPER THINKING IT WA