Portable Plant #3 (CS50): 86 citaciones de la MSHA Metal/Non-Metal

Employee alleges he was running on a flat surface toward the screen chute because it was plugged and his knee gave out on him. Employee had surgery on 12-08-15 and is losing time now.

Employee alleges he was cleaning off guard and some dirt and rocks came off of guard and hit him in his face. I just received Dr. notes on 01/08/2013 stating removal of foreign object in his right eye.

Employee alleges he was climbing out of skid steer and he noticed pain in his back as the day went on it got worse. This is reportable because of the prescription dose the employee was given for pain.

Employee alleges he was lining up holes to drill and he slipped on some ice hurting his right knee. Employee started losing time on 02/16/10 and was reported to supervisor on 02/15/10.

Dr related cyst surgery to the original injury of broken fingers on 3-5-03. This is an ongoing injury.

Employee alleges he was lifting a transformer up to the mounting holes and his right foot slipped on a piece of wire.

EMPLOYEE ALLEGES HE WAS INVESTIGATING A NOISE COMING FROM AN ELEVATED HEAD PULLEY WHEN HE TURNEDTO LOOK AT SOMETHING ELSE. THE 2 FT PRY BAR HE HAD IN HIS LEFT HAND INADVERTANTLY CAME IN CONTAC T WITH THE PINCH POINT OF THE HEAD PULLEY DRAWING IN THE BAR AND HIS HAND. HE PULLED OUT HIS HAND BUT RECEIVED 2 BROKEN FINGERS.

EE ALLEGES HE WAS REMOVING DRILL BITTS FROM A BROKEN STEEL, THE STEEL CAME DOWN PINCHING HIS FINGERS BETWEEN THE BITTS AND THE GROUND.

EE ALLEGES WHILE HE WAS MOUNTING SKIDSTEER HE SLIPPED ON PUSH BAR AND FELL ON HIS LEFT KNEE.

EE ALLEGES WHILE AT WORK DOING HER NORMAL WORK ACTIVITIES, RUNNING SCALEHOUSE FOR THE QUARRY SHESTARTED HAVING PAIN IN HER RIGHT ARM AND SHOULDER.

EE ALLEGES HE WAS ENTERING LOADER AFTER CLOSING DOOR, HE GRABBED THE MECHANISM ABOVE THE DOOR AND IT CREATED A PINCH POINT CUTTING OFF HIS LEFT FINGER TIP.

EE ALLEGES HE WAS HELPING TO ADJUST COMELONG IN CONE CRUSHER AND IT JUMPED GEARS AND CUT THE BOTTOM OF HIS THUMB & PALM

EE ALLEGES THIS HAS BEEN AN ON-GOING PROBLEM ON HER JOB DO TO INPUTTING TICKETS INTO THE COMPUTER ALL DAY.

EMPLOYEE ALLEGES HE WAS RUNNING TO TURN BELT OFF. IT WAS OVERFLOWING WITH ROCK, HE SLIPPED AND HIT KNEE ON STEEL GRATE CAUSING A BRUISE TO HIS LEFT KNEE.

EE ALLEGES HE WAS PLACING DRILL ROAD ON ANOTHER ROD, HE DROPPED DRILL ROD IT BUMPED HIS RIGHT KNEE AGAINST CENTRALIZER ARMS CAUSING A CONTUSION TO RIGHT KNEE.

EE WAS PUSHING ON RATCHET TO LOSSEN WEDGE BOLT, IT CAME LOOSE, HIS FINGER WAS PINCHED BETWEEN THE RATCHET HANDLE & THE CRUSHER SUPORT BEAM CAUSING HIM TO BREAK A BONE IN LEFT RING FINGER.

EMPLOYEE WAS STANDING ALONGSIDE LOAD OUT BIN CONVEYOR CHECKING FOR MATERIAL, WHEN A 4' PRYBAR THAT WAS LEANING AGAINST THE BIN FRAME FELL OVER AND STRUCK TOP OF HIS FOOT.

EMPLOYEE WAS LOSSENING CHUCK OF DRILL TO REMOVE BIT & INADVERTENLY BUMPED TRIGGER OF DRILL, CAUSING DRILL TO TURN & THE BIT CUT THE BOTTOM OF HIS RIGHT MIDDLE FINGER.

EE WAS PULLING ON PIPE WRENCH TO TIGHTEN PIPE NIPPLE. 36 INCH PIPE WRENCH SLIPPED AND THE END OF HANDLE HIT EE ABOVE LEFT EYE, CUTTING HIM. EE RECEIVED 6 STITCHES ABOVE LEFT EYE.

TWO EMPLOYEES WERE REMOVING GUARD FROM TAIL PULLEY OF BIN FEED CONVEYOR WHEN GUARD GOT IN BIND. EMPLOYEE GRABBED GUARD, GUARD SLIPPED PINCHING HIS FINGER BETWEEN BEARING AND GUARD UPRIGHT POST .

EMPLOYEE LOOSENED CLAMPING BOLTS THAT SECURE PRECLEANER TO FILTER HOUSING; THE PRECLEANER (ABOUT 60 LBS) SLIPPED AND FELL ABOUT FOUR FEET, STRIKING HIM IN THE LEFT FOOT DIRECTLY BEHIND THE STE EL TOE ON HIS BOOT.

EMPLOYEE WAS SITTING ON CONVEYOR, PULLING SLACK OF 4/0 POWER CABLE SUPPORTED BY CONVEYOR. WHEN HE PULLED ON THE WIRE, SOMETHING PULLED IN HIS UPPER RIGHT RIBCAGE AREA. HE DID NOT SEEK MEDICAL ATTENTION UNTIL 11-9-92. EMPLOYEE HAS BEEN OFF WORK FROM 11-9-92 THROUGH TODAYS DATE.

55081D CUT A PIECE OF 1/2 STEEL PLATE WITH A CUTTING TORCH SLAG KEPT THE PIECE FROM SEPARATING FROM THE ORIGINAL HE KNELT DOWN ON ONE KNEE AND RAISED A 2 LB HAMMER OVERHEAD TO HIT THE STEEL. A 20850RAISED THE HAMMER OVERHEAD, SOMETHING PULLED IN HIS BACK.

EMPLOYEE WAS KNEELING ON HANDS AND KNEES DIGGING PLUGGED MATERIAL OUT OF PUG MILL AND TWISTED OR PULLED SOMETHING IN HIS BACK.HE DID NOT SEEK MEDCIAL ATTENTION AT THE TIME OF INJURY.TODAY,MOND AY JULY 27,1992 A STATEMENT CAME IN FROM A CHIROPRACTOR STATING HE WAS STREATED ON 07-17-92.

EE HAD TURNED TO WORK ON 3-16-92 AFTER LAYOFF FROM 1-10 UNTIL 3-16-91, DUE TO PLANT SHUTDOWN. HE WORKED THE ONE DAY, 3-16-92 AND NOTIFIED HIS SUPERVSIOR ON 3-17-92 ABOUT A BACK PROBLEM. HE HAD AN OFF THE JOB BACK INJURY ON 1-17-92, AND HAD BEEN TREATING WITH A CHIROPRACTOR DURING THE LAY OFF. HE CLAIMS HE INJURED HIS BACK CLIMBING IN AND OUT OF TRUCK.

EMPLOYEE WAS SCOOPING OUT UNDER LOAD OUT BIN. THAT MORNING THERE WAS A HEAVY FROST AND HE SLIPPED AND FELL WHILE SCOOPING. HE REPORTED THE INCIDENT TO HIS SUPERVISOR BUT DID NOT STATE THAT HE PLANNED TO GO TO THE DOCTOR. IT WAS NOT LEARNED UNTIL FRIDAY 13, 1992 THAT HE WENT TO A CHIROPRACTOR AND RECEIVED TREATMENT WHEN THE DOCTOR'S STATEMENT CAME IN.

ANTI-FREEZE LEAK IN RADIATOR BLEW BACK AND GAVE OFF GAS FUMES. THIRD PARTY TESTING REVEALED THAT NOT ENOUGH CO WAS PRESENT TO CAUSE ANY EXPOSURE. TEST RESULTS WERE ONLY 4 PPM-MINIMUM HAZARDOUS LEVEL IS 35 PPM.

EE GOT OUT OF TRUCK TO MOVE A ROCK OFF HAUL ROAD A LARGE ROCK ROLLED THE WRONG WAY AND LANDED ON HIS FOOT.

EE WAS SHOVELING OUT FROM JAW BELT TAIL PULLEY WHILE CONVEYOR WAS RUNNING. CONVEYOR BELT CAUGHT SHOVEL, JERKING SHOVEL OUT OF EE S HANDS. HE DID NOT GO TO DR AT TIME OF ACCIDENT BUT WENT ON JU LY 31. AT THE TIME THE DR PUT A CAST ON HIS FINGER. LATE REPORTING OF THIS INJURY WAS DUE TO AN OVERSIGHT.

EMPLOYEE WAS HELPING I.NAME INSTALL A MUFFLER ON A HAUL TRUCK. I.NAME WAS TAPPING IT DOWN WITH A HAMMER AND IT STOPPED MOVING. I.NAME REMOVED HIS HARD HAT TO LOOK UNDER THE HOOD FOR THE PROBLE M. AT THAT TIME THE HAMMER SLIPPED OUT OF I.NAME'S HAND, BOUNCED OFF THE MUFFLER AND HIT I.NAME ON THE TOP OF THE HEAD.

EE WAS DRIVING UP HILL FROM FUEL TANK TO PLANT AREA. THE TRUCK WAS LOADED AND FAILED TO PULL THE HILL. THE FOOT BRAKE DID NOT HOLD THE TRUCK AND HE BACKED DOWN THE HILL AND AROUND A CORNER OF THE ROAD. THE RIGHT REAR WHEELS ROLLED UP ON THEEDGE OF THE LIME PILE AND THE TRUCK OVERTURNED.

THERE WAS HOLE IN BACK OF FUEL TANK ALLOWING FUELD TO LEAK & FUMES TO ENTER CAB OF TRUCK.

EMPLOYEE WAS WELDLING ALL THREAD ROD TO SPRING HOUSINGS IN CONE CRUSHER FOR REMOVAL. HE DIDN'T GET THE WELDING HOOD FLIPPED DOWN BEFORE STRIKING AN ARC WITH THE ELECTRODE AND RECEIVED WELD FLA SH TO BOTH EYES.

EMPLOYEE WAS LOADING 50 LB ANFO BAGS INTO A PICKUP TRUCK FROM OUT OF ANFO TRAILER. HE PICKED UP A BAG AND TURNED TO DROP IT IN THE TRUCK AND PULLED SOMETHING IN HIS LOWER BACK.

EMPLOYEE WAS TRYING TO START THE CONVEYOR FEEDING THE SCREEN, THE SCREEN WAS NOT RUNNING AND SOME ROCKS ROLLED OFF THE TOP OF THE SCREEN AND ONE OF THEM STRUCK THE EMPLOYEE IN THE BRIM OF HIS HARDHAT AND HIS FACE.

EMPL LOADING TRUCK WHEN PIECE OF METAL BLEW INTO LOADER AND EMBEDDED IN HIS EYE.

EMPL WAS CLIMBING INTO PIT TRUCK AND HIT THE TOP OF THE DOOR FRAME WITH HIS HEAD AND JAMMED HIS NECK AND BACK EMPL CALLED TODAY AND INFORMED ME THAT HIS DR AN OSTEOPATH MANIPULATED HIS BACK HE HAD NOT BEEN TREATED BEFORE OTHER THAN AN EXAMINATION

EMPLOYEES BACK STARTED TO HURT WHILE RIDING UP HILL TO WORK AREA IN ANOTHER EMPLOYEES PICKUP TRUCK

EMPLOYEE JUMPED OFF THE BACK OF THE EXPLOSIVES TRUCK AND FET SOMETHING POP IN HIS BACK.

EMPLOYEE WAS HELPING TO STRAIGHTEN DRIVE BELTS ON PRIMARY CRUSHER HIS FINGERS WERE CAUGHT & PINCHED BETGWEEN THE DRIVE BELTS & THE DRIVE MOTOR PULLEY

EMPLOYEE WAS HELPING TO INSTALL BUCKET ON ENDLOADER AND AS HE WAS WALKING AROUND REAR OF ENDLOADER HE WALKED INTOT HE EDGE OF A PLATE THAT WAS LAYING ON THE REAR BUMPER OF THE MACHINE, CUTTING HIS NOSE AND CHEEK.