Hauler backed over the outslope. The hauler traveled approximately 150 feet down the spoil pile. The operator was ejected from the cab of the hauler. Operator was a contract worker.
S-17 Cumberland: 1 muerte registrada Coal
S-17 Cumberland tiene $234K en multas propuestas de MSHA y $44K pendientes en 30 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en S-17 Cumberland.
- Muertes
- 1
- Incidentes totales
- 23
- Años en registro
- 2006–2019
- Último incidente
- May 2019
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.ⓘ
Una orden bajo la Sección 107(a) retira a los mineros de un área cuando un inspector detecta un peligro inminente. Cada orden se levanta una vez corregida la condición, por lo que esto cuenta las órdenes emitidas, no las que están en vigor ahora.S-17 Cumberland tiene $234K en multas propuestas de MSHA y $44K pendientes en 30 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.ⓘ
Las proporciones se calculan sobre las citaciones que llevan la codificación de gravedad y negligencia de la MSHA; una pequeña parte de los registros no está codificada.ⓘ
Impugnar una citación ante la Comisión Federal de Revisión de Seguridad y Salud Minera es un derecho legal. Estas cifras presentan los resultados públicos de ese proceso, según el archivo de Violaciones Impugnadas de MSHA.- Conciliadas 110 · 96%
- Quedaron como emitidas 3 · 3%
- Anuladas o retiradas 1 · 1%
ⓘ
Una citación Significativa y Sustancial cuenta como sobreviviente cuando la conciliación o la decisión del juez mantuvo la designación, o cuando la impugnación fue desestimada o quedó en rebeldía y la citación quedó como emitida. Las citaciones anuladas o retiradas, y las conciliaciones que quitaron la designación, cuentan en contra.ⓘ
Una reducción o desestimación ante la Comisión es un resultado legítimo de impugnar una multa propuesta. Las cifras son el monto propuesto y el monto confirmado en la decisión del expediente.| Expediente | Decisión | Juez | Año | Propuesta / confirmada |
|---|---|---|---|---|
| KENT 2009-237 | Settlement | McCarthy | 2012 | $60K → $60K |
| KENT 2012-815 | Settlement | Bulluck | 2012 | $32K → $24K |
| KENT 2018-0204 | Settlement | Moran | 2018 | $10K → $7K |
| KENT 2016-0165 | Settlement | Steele | 2016 | $5K → $4K |
| KENT 2016-0506 | Settlement | Simonton | 2017 | $4K → $3K |
| KENT 2017-0119 | Settlement | Miller | 2017 | $4K → $3K |
El muestreo de MSHA en S-17 Cumberland muestra que 100% de 323 muestras de polvo respirable de carbón cumplieron el estandar de 1.5 mg/m3.
ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.Polvo respirable de carbón
ⓘ
Las cifras de polvo respirable de carbón y sílice corresponden a instalaciones de carbón. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.
Última medición: 2019-06-24, hace 7 años
ⓘ
Las cifras de polvo respirable de carbón y sílice corresponden a instalaciones de carbón. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.ⓘ
El valor de concentración excesiva (ECV) es el umbral de aplicación por muestra de la propia MSHA, que incorpora la incertidumbre de medición; una muestra por encima de su ECV puede motivar una citación. El conteo cubre solo las muestras a las que MSHA asignó un ECV.- BULLDOZER OPERATOR112
- HIGHWALL DRILL OPERATOR81
- HIGHLIFT OPERATOR/FRONT END LOADER48
Sílice (cuarzo)
Última medición: 2019-03-25, hace 7 años- BULLDOZER OPERATOR10
- HIGHWALL DRILL OPERATOR4
- HIGHLIFT OPERATOR/FRONT END LOADER3
Ruido
ⓘ
La proporción cuenta las muestras de ruido cuya dosis medida superó el límite permisible de exposición de 90 dBA. Describe el lugar de trabajo muestreado, no lo que llegó al oído del minero: los programas de conservación de la audición y la protección auditiva usada durante el turno se registran por separado y no se reflejan aquí.
Última medición: 2019-03-19, hace 7 años
ⓘ
La proporción cuenta las muestras de ruido cuya dosis medida superó el límite permisible de exposición de 90 dBA. Describe el lugar de trabajo muestreado, no lo que llegó al oído del minero: los programas de conservación de la audición y la protección auditiva usada durante el turno se registran por separado y no se reflejan aquí.- BULLDOZER OPERATOR45
- REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE33
- HIGHLIFT OPERATOR/FRONT END LOADER31
ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.ⓘ
Las cifras de polvo respirable de carbón y sílice corresponden a instalaciones de carbón. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.| Año | dentro de 1.5 mg/m3 | muestras |
|---|---|---|
| 2019 | 100% | 14 |
| 2018 | 100% | 20 |
| 2017 | 100% | 30 |
| 2016 | 100% | 30 |
| 2015 | 100% | 29 |
| 2014 | 100% | 11 |
| 2013 | 100% | 16 |
| 2012 | 100% | 36 |
| 2011 | 100% | 11 |
| 2010 | 100% | 5 |
| 2009 | 100% | 39 |
| 2008 | 100% | 29 |
| 2007 | 100% | 9 |
| 2006 | 100% | 23 |
| 2005 | 100% | 15 |
| 2004 | 100% | 6 |
| Año | sílice prom. (%) | muestras |
|---|---|---|
| 2019 | 7.1 | 3 |
| 2018 | 4.0 | 2 |
| 2017 | 5.0 | 3 |
| 2016 | 27.1 | 3 |
| 2012 | 35.3 | 1 |
| 2011 | 13.8 | 4 |
| 2008 | 20.6 | 1 |
| 2007 | 12.2 | 1 |
| 2005 | 12.7 | 1 |
| Año | sobre el LPE | muestras |
|---|---|---|
| 2019 | 0% | 5 |
| 2018 | 0% | 5 |
| 2017 | 0% | 10 |
| 2016 | 0% | 15 |
| 2015 | 0% | 12 |
| 2014 | 0% | 4 |
| 2013 | 11% | 9 |
| 2012 | 5% | 20 |
| 2011 | 0% | 5 |
| 2010 | 0% | 5 |
| 2009 | 0% | 23 |
| 2008 | 16% | 19 |
| 2007 | 0% | 7 |
| 2006 | 0% | 13 |
| 2005 | 17% | 6 |
| 2004 | 20% | 5 |
S-17 Cumberland registró 1.82 casos de lesión reportables por cada 100 trabajadores a tiempo completo en 2018.
ⓘ
Esta tasa son los casos de lesión reportables por cada 100 trabajadores a tiempo completo por año, calculada como 200,000 por los casos dividido entre las horas-empleado reportadas por el operador a la MSHA. Los casos son lesiones que la MSHA clasificó en grado 01 a 07; se excluyen los eventos de solo accidente que no lesionaron a nadie, y también las lesiones de contratistas, cuyas horas no corresponden a una sola mina. Las tasas comienzan en el año 2000, cuando inicia el reporte trimestral de empleo, y se omiten por debajo de 20,000 horas en un año.| Año | tasa de casos totales | días perdidos | mortales |
|---|---|---|---|
| 2018 | 1.82 | 1.82 | 0.000 |
| 2017 | 0.00 | 0.00 | 0.000 |
| 2016 | 0.00 | 0.00 | 0.000 |
| 2015 | 1.58 | 1.58 | 0.000 |
| 2014 * | 0.00 | 0.00 | 0.000 |
| 2013 * | 0.00 | 0.00 | 0.000 |
| 2012 | 2.19 | 1.09 | 0.000 |
| 2011 | 0.00 | 0.00 | 0.000 |
- Cumberland River Coal Company 2004 a 2014
- Blackjewel L.L.C. 2014 al presente
ⓘ
La producción de carbón se reporta trimestralmente y va con retraso respecto al periodo actual; los trimestres más recientes pueden estar incompletos.| Año | Empleados | Carbón producido (toneladas) |
|---|---|---|
| 2019 | 24 | 35,743 |
| 2018 | 47 | 302,873 |
| 2017 | 34 | 323,575 |
| 2016 | 37 | 485,652 |
| 2015 | 38 | 677,748 |
| 2014 | 14 | 110,329 |
| 2013 | 17 | 4,438 |
| 2012 | 73 | 552,187 |
| 2011 | 136 | 938,212 |
| 2010 | 118 | 883,361 |
| 2009 | 102 | 856,586 |
| 2008 | 121 | 1,310,620 |
| 2007 | 94 | 1,079,757 |
| 2006 | 62 | 1,021,056 |
| 2005 | 44 | 588,791 |
| 2004 | 27 | 134,750 |
S-17 Cumberland se ubica en Letcher County, Kentucky, donde la categoría minera del Censo representa el 3.5% del empleo del condado.
ⓘ
Las cifras del condado provienen de la Encuesta sobre la Comunidad Estadounidense de la Oficina del Censo de EE. UU., estimaciones quinquenales agrupadas, por lo que la edición de 2023 abarca de 2019 a 2023. La categoría del Censo es 'minería, explotación de canteras y extracción de petróleo y gas', que es más amplia que la jurisdicción de la MSHA e incluye a trabajadores de petróleo y gas que ninguna mina emplea. Estas cifras describen el condado circundante, no esta mina, y no son un factor en ningún incidente específico.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2019 Q2 | 10 | 0 | 0 | 0.0 |
| 2019 Q1 | 21,608 | 3 | 0 | 138.8 |
| 2018 Q4 | 24,322 | 6 | 1 | 246.7 |
| 2018 Q3 | 27,386 | 6 | 0 | 219.1 |
| 2018 Q2 | 29,860 | 0 | 0 | 0.0 |
| 2018 Q1 | 28,487 | 0 | 0 | 0.0 |
| 2017 Q4 | 28,487 | 5 | 0 | 175.5 |
| 2017 Q3 | 18,360 | 5 | 3 | 272.3 |
Mostrar 52 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2017 Q2 | 29,353 | 24 | 4 | 817.6 |
| 2017 Q1 | 31,584 | 10 | 2 | 316.6 |
| 2016 Q4 | 28,735 | 17 | 5 | 591.6 |
| 2016 Q3 | 25,211 | 6 | 1 | 238.0 |
| 2016 Q2 | 27,282 | 11 | 1 | 403.2 |
| 2016 Q1 | 29,795 | 11 | 6 | 369.2 |
| 2015 Q4 | 30,699 | 11 | 5 | 358.3 |
| 2015 Q3 | 30,891 | 12 | 3 | 388.5 |
| 2015 Q2 | 30,317 | 8 | 3 | 263.9 |
| 2015 Q1 | 34,425 | 9 | 3 | 261.4 |
| 2014 Q4 | 23,451 | 4 | 2 | 170.6 |
| 2014 Q3 | 1,295 | 0 | 0 | 0.0 |
| 2014 Q2 | 6,152 | 0 | 0 | 0.0 |
| 2014 Q1 | 5,830 | 5 | 2 | 857.6 |
| 2013 Q4 | 8,252 | 0 | 0 | 0.0 |
| 2013 Q3 | 8,136 | 0 | 0 | 0.0 |
| 2013 Q2 | 8,480 | 0 | 0 | 0.0 |
| 2013 Q1 | 9,903 | 0 | 0 | 0.0 |
| 2012 Q4 | 28,822 | 1 | 0 | 34.7 |
| 2012 Q3 | 34,590 | 1 | 0 | 28.9 |
| 2012 Q2 | 51,638 | 0 | 0 | 0.0 |
| 2012 Q1 | 68,014 | 11 | 3 | 161.7 |
| 2011 Q4 | 81,316 | 1 | 1 | 12.3 |
| 2011 Q3 | 85,333 | 13 | 2 | 152.3 |
| 2011 Q2 | 91,556 | 0 | 0 | 0.0 |
| 2011 Q1 | 84,896 | 11 | 1 | 129.6 |
| 2010 Q4 | 80,699 | 0 | 0 | 0.0 |
| 2010 Q3 | 77,420 | 9 | 0 | 116.2 |
| 2010 Q2 | 76,111 | 0 | 0 | 0.0 |
| 2010 Q1 | 61,976 | 2 | 0 | 32.3 |
| 2009 Q4 | 57,417 | 3 | 1 | 52.2 |
| 2009 Q3 | 57,034 | 7 | 2 | 122.7 |
| 2009 Q2 | 57,689 | 0 | 0 | 0.0 |
| 2009 Q1 | 67,840 | 8 | 0 | 117.9 |
| 2008 Q4 | 81,930 | 1 | 1 | 12.2 |
| 2008 Q3 | 86,160 | 12 | 6 | 139.3 |
| 2008 Q2 | 85,588 | 4 | 2 | 46.7 |
| 2008 Q1 | 76,558 | 16 | 2 | 209.0 |
| 2007 Q4 | 63,230 | 1 | 0 | 15.8 |
| 2007 Q3 | 56,675 | 1 | 0 | 17.6 |
| 2007 Q2 | 61,246 | 16 | 2 | 261.2 |
| 2007 Q1 | 58,169 | 0 | 0 | 0.0 |
| 2006 Q4 | 55,346 | 7 | 0 | 126.5 |
| 2006 Q3 | 52,547 | 0 | 0 | 0.0 |
| 2006 Q2 | 45,791 | 5 | 1 | 109.2 |
| 2006 Q1 | 40,005 | 0 | 0 | 0.0 |
| 2005 Q4 | 35,131 | 6 | 0 | 170.8 |
| 2005 Q3 | 37,197 | 6 | 4 | 161.3 |
| 2005 Q2 | 29,885 | 5 | 3 | 167.3 |
| 2005 Q1 | 27,315 | 7 | 4 | 256.3 |
| 2004 Q4 | 22,746 | 0 | 0 | 0.0 |
| 2004 Q3 | 13,248 | 7 | 3 | 528.4 |
Muertes en esta mina
1 registradasIncidentes reportables
22 en archivo (excluyendo las muertes anteriores)2019 · 1 incidente
employee was changing pin with porta power. Pusher metal shot out, ricocheted off dozer and struck them in the face. They received 30 stitches for the wound.
2018 · 1 incidente
While operating rock truck employee hit a hole on return run & jostled them inside cab. Employee has pulled muscle.
2017 · 2 incidentes
A fire occurred on Unit # 30305 while driving down the road to the drill bench.
Got out of shot loader to check the road condition, slipped & fell on ice, hurt left arm
2015 · 1 incidente
While putting together a set of cutter chains and striking the pin with a hammer, the pin splintered and a piece of it struck employee in the right eye.
2012 · 2 incidentes
EE was driving a pin in the 16G grader, when he hit the pin with the sledge hammer a piece of the pin chipped off and went into his right upper arm.We took him to the doctor and the doctor told him to leave it in the arm no treatment needed.Then he went to a family Doctor he took it out 5-22-12 had 3 stitches He hasn't missed any work.
EE was lifting a 10HP cooling system pump motor in the BPM room when he felt something pull in his lower back we took him to the hospital Dr. said he was all right could go back to work. Started having more back Doctor took him off work on 2/7/12 did not meet the requirements to report till 2/7/12
2010 · 4 incidentes
Employee was marking drill holes in the Kelly seam pit, when he slipped, fracturing his right leg.
Employee, was using a small pry bar to work on a piece of equipment. The bar slipped and struck him on his face near his mouth resulting in a laceration that required stitches.
EE was in the loader, another EE was directing him what to do. One EE told the other EE to push the dozer track over and gave him the motions to go ahead and do it. When it rolled over it landed on the EE's leg.
Employee was using a chain hoist to pull on the miner chain when the hoist came loose striking the employee on his right leg resulting in a fracture to the Fibula bone.
2009 · 3 incidentes
Installing bottom hose on powertrain cooler on 992D Cat Loader, felt burning sensation in left shoulder. Left Shoulder Strain.
Employee was operating a D-10 Dozer in a shot when he says that his back began to hurt from being bounced around.
Was loading buckets of coal samples into truck and strained back.
2008 · 5 incidentes
Driver lost control of tractor trailer when engine failed and he lost air pressure after restarting engine. Trailer went into ditch. Tractor rolled onto haul road. Driver visited ER on 10/08 and was treated for strained lumbar. Prescribed 2 days off work.
An employee suffered a fatal heart attack while standing beside a Caterpiller D-10 dozer. Employee was found on the ground next to the track of the dozer. He was found at approximately 3:30 pm. The actual time of the heart attack is unknown but was probably within 15 to 20 minutes of the attack.
Employee was moving a highwall drill to a new location when one track ran over a rock in the roadway. When the drill crossed the rock it caused a sudden bounce to the employee. He was released from the medical facility with no restrictions to return to work. He returned to the medical facility on 4/25 and was taken off work because of swelling of the disk of the spine
Blasting a spillway ditch for a new pond when grass caught fire. The blast holes were 4" in diameter and 10 feet deep. The grass and leaf fire was extinguished in approximately one hour. There were no injuries and no equipment damage.
EE was working in the warehouse. He stated he was placing a large torque wrench (61 lbs) on a bottom storage shelf. He stated that as he was lifting the wrench, the device twisted and he felt a sharp pain in his right forearm.
2007 · 2 incidentes
The EE was cutting off the sideboard of a dozer blade. After making the cut, he struck the metal with a hammer to knock off the blade. The metal did not fall. He grabbed metal with hand and metal fell striking him on top of right foot behind the hard toe cap.
EE was assisting in changing 4 sections of 30 foot steel on an Ingerso Rand surface drill. One section was stuck and when it freed, it swung approx 4', striking the EE's right hand. It caught the middle and index fingers between the steel and the drill head. Amputation of the two fingers between 1st and 2nd joints.
2006 · 1 incidente
Employee was driving a coal truck & the tailgate of the truck popped open. He was trying to close it back, his ring finger on his right hand was smashed & cut. He was taken to the E.R. and had 20 stitches.