Shelly Materials Inc Springfield: 17 citaciones de la MSHA Metal/Non-Metal

EE WAS GREASING LOADER. AIR GREASER PISTON JAMMED AND EE TRIED TO MANUALLY PUSH IT UP, WHEN IT BECAME FREE IT SMASHED HIS MIDDLE FINGER ON BOTHHANDS.

SITTING ON THE GROUND TAKING OFF A PAIR OF RUBBER BOOTS.

EE WAS ATTEMPTED TO DISLODGE THEY BLOCKS BY RPYING WITH A BAR ON 100 TON BIN WHEN PRY BSRT SLIPPED AND SMASHED TWO FINGERS ON LEFT HAND.

SLIPPED ON FINE CONE CRUSHER AND HIT MY LEG ON IT.

WAS WSAHING MATERIAL FROM AROUND CRUSHER MOTOR AND SLIPPED AND FELL 6 FT ONTO CONVEYER BELT.

HE WAS ASSISTING IN MOVING PIPE TO BE WELDED AND MUST HAVE LOOKED AT WRONG TIME.

COMEALONG SLIPPED OFF WHILE PULLING SCREEN.

WELDING ON FIELD FEEDER HELMET FELL OFF HEAD.

BELT SLIPPIN GTRY TO STOP GRAVEL COMING OUT OF CHUTE WITH SHOVEL AND HANDS.

CLIMB LADDER TO CHECK JAW LADDER SID AND MAN FELL.

CUT HOIST CABLE ON DRAGLINE TO GET WEDGE OUT AND SLIPPED, PUT HAND ON DRUM AND BURNT IT.

WAS USING A DIE GRINDER ON A DRAGLINE DRUM A PIECE OF STONE HIT HIM IN EYE.

PUT BRAKE METHANOL IN DRAGLINE. SPLASHED INTO EYE.

STEPPED OFF TRACTOR TWISTED ANKLE.

LIFTING TROFT IDLER BRAKET ONTO CONVEYOR FRAME, TWISTED BACK.

ROCK JUMPED OFF SCALPING SCREEN AND MAN WAS UP THERE HIT HIM IN HAND CONTUSION.

EMP WAS MOVING ROCKS OFF OF THE FEEDER AND A ROCK ROLLED ON HIS HAND SMASHING HIS HAND, CAUSING A CONTUSION TO HIS RIGHT RING FINGER.

EMPLOYEES WERE USING PROPANE TORCH TO THAW OUT MATERIAL IN THE RECEIVING BOX OVER THE COARSE CONE CRUSHER AND CAUGHT THE LINATEX IN THE CHUTE ON FIRE AND DIDN'T NOTICE IT. THEY WERE AT LUNCH B REAK WHEN IT WAS NOTICED. THE FIRE BURNT LINATEXIN THE CONE CRUSHER CHUTE AND NO. 1 PLANT CONVEYOR IN TWO AND CROWN RUBBER ON THE 5 X 12 SCREEN.

EE WAS SHOVELING MATERIAL AND HURT HIS BACK.

EMPLOYEE WAS CLIMBING DOWN FROM THE LEFT IN THE OIL SHED WHEN HE SLIPPED OR TRIPPED AND FELL, PULLING A MUSCLE IN HIS NECK.

EE RUNS YARD LOADER AND WAS COMPLAINING ABOUT HIS ARM AND BACK HURTING. EE ASKED TO GO HOME AND TO THE DR. THE DR SAID IT IS A HERNIATED DISC IN HIS BACK.

EE WAS HELPING JACK UP CONE CRUSHER, WHEN JACK KICKED OUT STRIKING EE IN HIS CHEST, EE SUFFERED A BRUISE TO HIS CHEST.

EE WAS KNOCKING ROLLERS LOOSE ON CONVEYOR WHEN CONVEYOR PULLED HAMMER AND HIS HAND BETWEEN ROLLER AND CONVEYOR CUTTING HIS FINGER.

EMPLOYEE WAS LOWERING TOOLS FROM PLANT AND CAUGHT HIS FINGER IN THE ROPE DISLOCATING IT, RIGHT INDEX FINGER.

EE WAS KNOCKING BOLTS OUT OF GRAVITY TAKEUP WITH HAMMER & PUNCH PIECE OF METAL STRUCK HIM IN LEFT EYE.

EE WAS HELPING PICK MUD, AND TRIED TO PULL A BIG PIECE OF MUD OFF THE BELT, AND IT PULLED HIS ARM INTO THE SIDE OF THE BUILDING CUTTING HIS ARM ON SOME METAL IDDING.

EMPLOYEE WAS CHECKING JAW AND CRUSHER WHEN A ROCK FELL AND STRUCK THE RIGHT HAND SMASHING HIS PINKY FINGER END, FRACTURING HIS FINGER AND REQUIRING STITCHES.

EMPLOYEE WAS SPLICING A BELT CONV, USING A COME-A-LONG, WHEN THE HANDLE BENT AND HE LOST HIS BALANCE AND FELL BACK INTO CONV.

EE WAS CHECKING PLANITARIES SERVICING MACHINE AND PULLED A MUSCLE IN HIS RIGHT SHOULDER.

EE HAD REPLACED CONTACTS IN ELECTRIC BOX, AND FORGOT TO REPLACE COVEROVER CONTACTS THAT PREVENT ARCING WHEN HE TURNED BOX ON CONTACT ARCED FORCING BOX DOOR OPEN INTO HIS LEFT HAND SPRAIN HIS W RIST.

EE WAS PICKING MUD AND OVERSIZE ROCKS OFF CONVEYOR, WHEN HE SMASHED HIS ARM BETWEEN A ROCK AND WALL.

DRIVER WAS DOING MAINTENANCE ON TRUCK WHEN HE SLIPPED OFF THE BUMPER OF THE TRUCK AND FELL AGAINST THE TOP OF RADIATOR OF TRUCK, HITTING HIS CHEST ON THE LEFT SIDE, CAUSING HIM TO RECEIVE A BR UISE TO HIS CHEST.

BANK CAV ED OFF CAUSING CRANE TO GO INTO WATER EMPLOYEE REQUIRED STITCHES ON LEFT CHEEK & END OF FINGER

EMPLOYEE WAS CLEANING OUT A CHUTE, HE HAD TO REMOVE THE DOVER WHICH CUT HIS LITTLE FINGER RIGHT HAND WHICH REQUIRED SOME STITCHES.

ON AS TURNING AROUND HITTING HIS ELBOW ON STEERING KNOB.

WAS REMOVING A PICE OF ASPHALT FOR #1 CONVEYOR CHUTE AND FELT PAIN IN BACK.

WAS GETTING OUT OF LOADER AND TWISTED LOWER BACK.

EE WAS REMOVING UNDER DRAG CABLE WHEN CHUTE SLIPPED TO PINCHET FINGER.

EMPLOYEE WAS TIGHTENING NUT WITH WRENCH WHEN WRENCH SLIPPED OFF & HIT THE BACK OF HIS HAND ON A METAL OBJECT BRUISING HAND EMPLOYEE CAME BACK TO WORK THE SAME DAY BUT WAS ON LIGHT DUTY FOR TWO DAYS

EMPLOYEE WAS CUTTING A PIECE OF STEEL 5/16INX8FT LONG WITH A TORCH WHICH WAS ON A STEEL TRUSSEL AFTER THE JOB WAS COMPLETED THE PIECE FELL 261/2IN ON HIS RIGHT FOOT BRUISING TOP OF HIS FOOT & FRACTURING HIS BIG TOE

CONTACTED ONE CONVEYOR AND WE WERE REPLACING END SECTION OF CHUTE WITH CRANE WHICH HAD TO BE LOWERED BETWEEN TWO CONVEYORS AND STARTED TO FALL GOT OUT OF ITS WAY BY GOING TO CATWALK THE END S ECTION HIT CATWALK FOLDING IT UNDER AND THROWING ME INTO AIR I FELL LANDING ON MY FEET FRACTURING LT ANKLE AND VERTIBRAE IN BACK

WHILE DRIVING SPECIAL MADE PUMCHWITH A WOODEN HANDLE IN IT WITH HAMMER A SMALL PC OF STEEL FROM EITHER THE PUNCH OR HAMMER WENT INTO THE LITTLE FINGER AT THE FIRST JOINT ON LEFT HAND