While removing lid employee caught fingers underneath lid and had minor surgery of finger that required stitches.
UZ: 854 citaciones de la MSHA Coal
UZ tiene $410K en multas propuestas de MSHA y $13K pendientes en 18 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en UZ.
- Muertes
- 0
- Incidentes totales
- 78
- Años en registro
- 2002–2008
- Último incidente
- Oct 2008
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.UZ tiene $410K en multas propuestas de MSHA y $13K pendientes en 18 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.ⓘ
Las proporciones se calculan sobre las citaciones que llevan la codificación de gravedad y negligencia de la MSHA; una pequeña parte de los registros no está codificada.ⓘ
Impugnar una citación ante la Comisión Federal de Revisión de Seguridad y Salud Minera es un derecho legal. Estas cifras presentan los resultados públicos de ese proceso, según el archivo de Violaciones Impugnadas de MSHA.- Conciliadas 90 · 100%
ⓘ
Una citación Significativa y Sustancial cuenta como sobreviviente cuando la conciliación o la decisión del juez mantuvo la designación, o cuando la impugnación fue desestimada o quedó en rebeldía y la citación quedó como emitida. Las citaciones anuladas o retiradas, y las conciliaciones que quitaron la designación, cuentan en contra.ⓘ
Una reducción o desestimación ante la Comisión es un resultado legítimo de impugnar una multa propuesta. Las cifras son el monto propuesto y el monto confirmado en la decisión del expediente.| Expediente | Decisión | Juez | Año | Propuesta / confirmada |
|---|---|---|---|---|
| KENT 2008-1308 | Settlement | Weisberger | 2010 | $46K → $38K |
| KENT 2009-941 | Settlement | Feldman | 2011 | $42K → $30K |
| KENT 2009-468 | Settlement | Barbour | 2011 | $33K → $23K |
| KENT 2009-202 | Settlement | 2011 | $23K → $17K | |
| KENT 2008-28 | Settlement | Feldman | 2008 | $18K → $12K |
| KENT 2008-543 | Settlement | Feldman | 2009 | $16K → $12K |
El muestreo de MSHA en UZ muestra que 95% de 986 muestras de polvo respirable de carbón cumplieron el estandar de 1.5 mg/m3.
ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.Polvo respirable de carbón
ⓘ
Las cifras de polvo respirable de carbón y sílice corresponden a instalaciones de carbón. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.
Última medición: 2009-02-09, hace 17 años
ⓘ
Las cifras de polvo respirable de carbón y sílice corresponden a instalaciones de carbón. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.- CONTINUOUS MINER OPERATOR440
- SCOOP CAR OPERATOR66
- MOBILE BRIDGE OPERATOR64
Sílice (cuarzo)
Última medición: 2008-12-18, hace 17 años- CONTINUOUS MINER OPERATOR48
Ruido
ⓘ
La proporción cuenta las muestras de ruido cuya dosis medida superó el límite permisible de exposición de 90 dBA. Describe el lugar de trabajo muestreado, no lo que llegó al oído del minero: los programas de conservación de la audición y la protección auditiva usada durante el turno se registran por separado y no se reflejan aquí.
Última medición: 2008-09-05, hace 17 años
ⓘ
La proporción cuenta las muestras de ruido cuya dosis medida superó el límite permisible de exposición de 90 dBA. Describe el lugar de trabajo muestreado, no lo que llegó al oído del minero: los programas de conservación de la audición y la protección auditiva usada durante el turno se registran por separado y no se reflejan aquí.- MOBILE BRIDGE OPERATOR16
- CONTINUOUS MINER OPERATOR14
- SCOOP CAR OPERATOR11
ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.ⓘ
Las cifras de polvo respirable de carbón y sílice corresponden a instalaciones de carbón. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.| Año | dentro de 1.5 mg/m3 | muestras |
|---|---|---|
| 2009 | 100% | 6 |
| 2008 | 96% | 119 |
| 2007 | 94% | 163 |
| 2006 | 93% | 152 |
| 2005 | 93% | 176 |
| 2004 | 97% | 149 |
| 2003 | 98% | 135 |
| 2002 | 97% | 86 |
| Año | sílice prom. (%) | muestras |
|---|---|---|
| 2008 | 5.7 | 10 |
| 2007 | 5.1 | 19 |
| 2006 | 5.8 | 17 |
| 2005 | 7.0 | 25 |
| 2004 | 8.0 | 11 |
| 2003 | 6.0 | 6 |
| 2002 | 6.7 | 7 |
| Año | sobre el LPE | muestras |
|---|---|---|
| 2008 | 0% | 1 |
| 2007 | 0% | 17 |
| 2006 | 18% | 17 |
| 2005 | 31% | 16 |
| 2004 | 0% | 10 |
| 2003 | 0% | 6 |
| 2002 | 9% | 11 |
UZ registró 6.91 casos de lesión reportables por cada 100 trabajadores a tiempo completo en 2008.
ⓘ
Esta tasa son los casos de lesión reportables por cada 100 trabajadores a tiempo completo por año, calculada como 200,000 por los casos dividido entre las horas-empleado reportadas por el operador a la MSHA. Los casos son lesiones que la MSHA clasificó en grado 01 a 07; se excluyen los eventos de solo accidente que no lesionaron a nadie, y también las lesiones de contratistas, cuyas horas no corresponden a una sola mina. Las tasas comienzan en el año 2000, cuando inicia el reporte trimestral de empleo, y se omiten por debajo de 20,000 horas en un año.| Año | tasa de casos totales | días perdidos | mortales |
|---|---|---|---|
| 2008 | 6.91 | 1.97 | 0.000 |
| 2007 | 6.10 | 4.36 | 0.000 |
| 2006 | 6.52 | 2.44 | 0.000 |
| 2005 | 7.88 | 0.98 | 0.000 |
| 2004 | 18.61 | 16.65 | 0.000 |
| 2003 | 10.51 | 7.35 | 0.000 |
| 2002 | 3.81 | 3.81 | 0.000 |
- Cook and Sons Mining, Inc. 2001 a 2004
- Coal Extraction LLC 2004 a 2004
- Sapphire Coal Company 2004 a 2021
- Smoky Quartz 2021 al presente
ⓘ
La producción de carbón se reporta trimestralmente y va con retraso respecto al periodo actual; los trimestres más recientes pueden estar incompletos.| Año | Empleados | Carbón producido (toneladas) |
|---|---|---|
| 2009 | 8 | 21,935 |
| 2008 | 71 | 488,589 |
| 2007 | 89 | 598,751 |
| 2006 | 88 | 614,163 |
| 2005 | 84 | 562,736 |
| 2004 | 82 | 510,740 |
| 2003 | 89 | 586,004 |
| 2002 | 50 | 363,077 |
| 2001 | 5 |
UZ se ubica en Letcher County, Kentucky, donde la categoría minera del Censo representa el 3.5% del empleo del condado.
ⓘ
Las cifras del condado provienen de la Encuesta sobre la Comunidad Estadounidense de la Oficina del Censo de EE. UU., estimaciones quinquenales agrupadas, por lo que la edición de 2023 abarca de 2019 a 2023. La categoría del Censo es 'minería, explotación de canteras y extracción de petróleo y gas', que es más amplia que la jurisdicción de la MSHA e incluye a trabajadores de petróleo y gas que ninguna mina emplea. Estas cifras describen el condado circundante, no esta mina, y no son un factor en ningún incidente específico.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2009 Q2 | 0 | 0 | 0 | |
| 2009 Q1 | 11,284 | 11 | 3 | 974.8 |
| 2008 Q4 | 31,075 | 35 | 16 | 1126.3 |
| 2008 Q3 | 39,681 | 69 | 21 | 1738.9 |
| 2008 Q2 | 63,779 | 37 | 12 | 580.1 |
| 2008 Q1 | 68,006 | 24 | 6 | 352.9 |
| 2007 Q4 | 58,141 | 51 | 20 | 877.2 |
| 2007 Q3 | 58,530 | 51 | 7 | 871.3 |
Mostrar 23 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2007 Q2 | 55,524 | 34 | 11 | 612.3 |
| 2007 Q1 | 57,231 | 46 | 10 | 803.8 |
| 2006 Q4 | 65,533 | 53 | 10 | 808.8 |
| 2006 Q3 | 64,544 | 37 | 15 | 573.3 |
| 2006 Q2 | 58,930 | 22 | 8 | 373.3 |
| 2006 Q1 | 56,426 | 24 | 6 | 425.3 |
| 2005 Q4 | 51,704 | 15 | 2 | 290.1 |
| 2005 Q3 | 52,162 | 18 | 8 | 345.1 |
| 2005 Q2 | 45,409 | 22 | 9 | 484.5 |
| 2005 Q1 | 53,897 | 14 | 6 | 259.8 |
| 2004 Q4 | 53,193 | 16 | 6 | 300.8 |
| 2004 Q3 | 49,404 | 25 | 14 | 506.0 |
| 2004 Q2 | 49,988 | 25 | 17 | 500.1 |
| 2004 Q1 | 51,615 | 46 | 24 | 891.2 |
| 2003 Q4 | 65,012 | 23 | 9 | 353.8 |
| 2003 Q3 | 46,276 | 22 | 12 | 475.4 |
| 2003 Q2 | 28,041 | 15 | 8 | 534.9 |
| 2003 Q1 | 51,020 | 12 | 5 | 235.2 |
| 2002 Q4 | 44,421 | 16 | 9 | 360.2 |
| 2002 Q3 | 34,772 | 20 | 16 | 575.2 |
| 2002 Q2 | 18,309 | 11 | 1 | 600.8 |
| 2002 Q1 | 7,350 | 7 | 3 | 952.4 |
| 2001 Q4 | 1,920 | 1 | 0 | 520.8 |
Incidentes reportables
78 en archivo2008 · 11 incidentes
While removing lid from miner, lid slipped and caught fingers, breaking ring finger and cutting little finger.
An employee tossed a closed knife to the injured employee and the knife bounced off the locker and came open and struck employee in the hand causing a laceration that required stitches.
An unintentional roof fall occurred in the # 4 Rt crosscut and extended into # 5 heading on the 001 unit.
While using his feet to push a tire, EE hurt his lower back. He began missing work 10/2/08 from an injury that occurred on 6/25/08 that was diagnosed as degenerative disc disease.
Unintentional roof fall found inspad 2626 by Mine examiner when making the area.
Employee strained himself on 4/14/2008 while working on a mini-trac. He was using a bar and when it slipped, he felt pain. He later went to a doctor and was diagnosed with a hernia and had surgery to repair on 4/23/2008.
Employee hit a roofbolt with his right elbow and had to have stitches to close the cut.
At around 8:00 AM an unintentional roof fall was found in the intake airway by the No.3 beltline.
Chain slipped on batteries and cut left index finger, requiring stitches.
The continuous miner was stuck and drawrock fell on the miner before it could be removed from the pillar cut.
2007 · 9 incidentes
Employee was striking an insert with a metal wrench and metal flew into his eye.
While loading a Ram Car tire, it fell over onto his foot and ankle resulting in a fracture.
An unintentional roof fall occurred on the MMU 002 Section at the Pillar line. The fall caught the miner. The fall occurred when mining the block between the #7 and #8 entries.
Mine sealant splashed in his right eye. Employee suffered a chemical burn to right eye that required medical attention that qualifies as a reportable injury.
Employee was injured 6/6/07 when he twisted his right knee as he was roof bolting. He had surgery on 7/13/07.
Highwall gave way onto the canopy and blocked the track entry. Fall was 3 to 5 feet long, 18 feet wide and 5 to 6 feet high.
He was working on the drive chain for the #5 Headpiece when he struck the chain with a hammer and a small piece of metal flew into his eye. Right eye.
Employee was struck by a scoop and suffered a laceration to his left lower leg that required stitches.
Employee was moving a rockduster from a scoop bucket and felt pain in his groin and lower back.
2006 · 14 incidentes
He was making a belt splice when a belt clamp came loose and as he fell he was struck in the head. Later in the shift he started having back pain.
Details unknown as no report filed by employee. An investigation by mine mgt. has not determined if a Part50 CFR reportable event has occurred. This report is being filed under protest and in response to MSHA by employee.
An unintentional roof fall has occurred in the #5 intake entry at the #5 crosscut along the #3 belt panel. The fall was from rib to rib, approx 60 feet long and approx. 6 foot high.
Employee was cutting belt with a knife when he fell and accidentally cut his right thigh. Wound required staples to close.
Employee was unloading belt structure when he felt pain in his stomach. He later went to the Doctor and was found to have a hernia.
Unintentional roof fall was found at 11:00 AM during a weekly examination. Area fall was found was 1 x-cut inby spad 2706. Fall was 40' long by 20' wide and 6' to 8' high.
An unplanned roof fall occurred in the #3 belt panel return entry at the #2 entry intersection of #8 X-cut. Fall was 50' in intersection and cross-cut and 30'long, 7' to 9'high. Area bolted with tension rebar.
An unintentional roof fall has occurred int he #3 hdg of 002-0 mmu inby spad. This fall was 20' wide 6' to 8' high and approx. 70' long. Fall did not impede ventilation or didn't involve any equipment. area bolted with 5' bolts.
Employee was climbing down from belt crossover at No. 5 drive and his foot slipped. This is being reported to abate violation No. 7436824
Employee was handling as miner cable and twisted his lower back.
Loading rock dust and moved quickly and twisted his back.
EE WAS ROOF BOLTING WHEN HE CAUGHT HIS FINGER BETWEEN THE WRENCH AND A ROOF BOLT BEING INSTALLED. CONTUSION & LACERATION - INDEX FINGER ON LEFT HAND.
AN UNINTENTIONAL ROOF FALL WAS FOUND AT 2:00 PM ON 1/18/06 IN THE #5 BELT PANEL IN #5 ENTRY, APPROX. 150' INBY SPAD 2282.
UNINTENTIONAL ROOF FALL, APPROX. 20' WIDE X 150' LONG X 6-8' HIGH. LOCATED AT BREAK 25 ON NO. 5 BELT PANEL IN THE #4 ENTRY.
2005 · 9 incidentes
Employee standy a chain w/hammer and a small piece of metal was imbedded in his right hand. Metal was removed.
HE WAS WALKING TO TOOL CAR WHEN HE RAN INTO A METAL STRAP AND LACERATED HIS RIGHT EAR REQUIRING SUTURES.
Employee splashed plaster in his left eye and material was removed from eye.
ROCK FALL FOUND AT THE #2 CROSSCUT INBY BELT #3 IN THE RETURN #1 ENTERY NO ONE WAS HURT
CUTTING MINER CABLE THE KNIFE SLIPPED CUTING HIS LEFT KNEE
EE WAS CUTTING BOX WITH UTILITY KNIFE AND CUT HIS INDEX FINGER ON RIGHT HAND.
EMPLOYEE WENT THROUGH A CURTAIN AND HIT HIS MOUTH ON BOLTER CABLE RESULTING IN A BROKEN TOOTH. INJURED ON FRIDAY AND RTW ON MONDAY.
EMPLOYEE WAS CUTTING A BELT AND CUT PALM OF HIS HAND REQUIRING STITCHES.
BELT ROLLED OUT OF SCOOP BUCKET ONTO HIS RIGHT KNEE
2004 · 22 incidentes
HURT HIS BACK WHILE SHOVELING BELT
Rock fell from rib and hit his left hand cutting 4 fingers.
Timber came loose and hit him on the right arm.
TWISTED HIS KNEE (WHILE WALKING).
DRILL STEEL CAME LOOSE & HIT EE'S LEFT FOREARM
HE WAS LOADING BELT STRUCTURE AND MASHED HIS MIDDLE FINGER ON HIS RIGHT HAND AGAINST THE SCOOP BUCKET.
Roof fall on the intake #6 entry in by spad #1130 the fall was 20' by 20' by 10' thick.
Roof fall on intake #7 entry across from spad #1104. The fall was 20' x 20' x 10' thick.
Trimming belt splice knife slipped and cut left palm.
PULLING ON BELT SLIPPED & FELL
LIFTING TIMBERS AND FELT PAIN IN LOWER BACK.
Working slack back on cable and hurt lower back. Was pulling cable.
Reoccurance of old back injury while shoveling belt.
REOCCURANCE OF OLD BACK INJURY (LIFTING BELT STRUCTURE).
Roof falling #6 entry 150' in by spad #1214 falling on mine.
SPLICING BLET WHEN A BELT NAIL HEAD FLEW UP AND HIT HIM IN THE LEFT EYE.
EE was lifting a 5 gallon oil can to put oil in the the roof bolter when he felt pain in lower side of stomach
HE SLIPPED ON WET BOTTOM AND TWISTED HIS LEFT ANKLE.
DRAW ROCK FELL AND CUT RIGHT SIDE OF FACE. HE GOT TWO STITCHES.
TRAMMING SCOOP, WHEEL DROPPED IN A HOLE. HE BOUNCED INTO CANOPY.
HE WAS STANDING BY THE FEEDER WHEN THE POWER CABLE HANGING FROM THE ROOF BLEW A SPLICE OUT BURN-ING HIS RIGHT EYE.
PUTTING RAM JACK IN SCOOP & HURT LOWER BACK. WAS ON LIGHT DUTY UNTIL 2-19-04 THEN DOCTOR PUT HIM OFF WORK.
2003 · 11 incidentes
STEM BLEW OUT OF VALVE BAND ON THE MINER CUTTING LEFT HAND AND FINGERS.
THE EE WAS CARRYING A BAG OF BLOCK BOND TO A BRATTICE AND STUMBLED OVER A 6" BLOCK AND FELL ON HIS BACK WITH THE BAG OF BLOCK BOND LANDING ON TOP OF HIM CAUSING PAIN IN HIS LOWER BACK AND LEGS .
REOCCURRENCE OF OLD INJURY ON FELT FOOT.
HE WAS BOLTING TOP WHEN A PIECE OF DRILL STEEL GOT LOOSE AND HIT HIM IN RIGHT SIDE OF HIS HEAD.
WORKING ON RUB RAIL ON MINER WHEN IT FELL ON EMPLOYEE'S LEFT FOOT (CONTUSION LEFT FOOT).
PULLED LEFT KNEE MOVING HIGHLINE.
LOADING HI-LINE AND PULLED MUSCLE IN LEFT ARM.
EE WAS BOLTING TOP AND HE LET THE DRILL POT DOWN ON HIS RIGHT KNEE (BRUISED RIGHT KNEE).
USING A BOX CUTTER TO OPEN A BUCKET OF PLASTER &THE KNIFE SLIPPED AND CUT HIS RIGHT THIGH.
EE WAS GETTING IN THE MBC AND TWISTED HIS RIGHT KNEE
REOCCURRENCE OF OLD INJURY. NOTE: NEW INCIDENT AT DIFFERENT MINE.
2002 · 2 incidentes
PICKED UP A PIECE OF METAL THREW IT DOWN AND GOT SOMETHING IN LEFT EYE.
TAKING CABLE UP WITH THE REEL ON THE ROOF BOLTER & CAUGHT THE EE'S FEET & FLIPPED HIM ON THE MINE BOTTOM LANDING ON HIS RIGHT SIDE. FRACTURED 1 RIB & BRUISED RIGHT SIDE.