Buscar en el registro

EE WAS OPERATING A HAUL TRUCK WHEN HE STRUCK A BUMP IN THE ROAD JARRING HIM & AGGRAVATING A PREEXISTING BACK PROBLEM. DOCTOR RELEASED HIM TO RETURN TO WORK THE SAME DAY AT LIGHT DUTY.

EE WAS INSTALLING A HINGE ON A SHOVEL BUCKET. WHILE DRIVING PIN INTO PLACE A PIECE BROKE OFF OF SLEDGE HAMMER FACE & STRUCK HIM IN THE MOUTH, CUTTING LOWER LIP & BREAKING OFF ONE TOOTH.

TWO EE INSTALLING FUEL TANK, ACCUMULATED FUEL RESIDUE WAS DEPOSITED ON LOWER COVERALL LEGS. LATER WHILE INSTALLING STINGER COVER, EE WAS STANDING ON COVER HOLDING IT IN PLACE WHEN SPARKS FROM WELDER IGNITED COVERALL LEGS. EE RECEIVED 1 ST. DEGREE BURNS ON HANDS AND LEFT LEG AND SMALL 2ND DEGREE BURN ON RIGHT CALF.

EE HAD BEEN WELDING ALL DAY LONG. THE NEXT MORNING HE FELT THE "SAND IN THE EYES" SYMPTOMS OF WELDERS FLASH.

EE WAS CLEANING A FEED CHUTE WHEN A LARGE CHUNK OF MATERIAL STRUCK HIS RIGHT HAND PUSHING IT AGAINST THE FRAME.

EE WAS PULLIJNG ON WRENCH, IT SLIPPED AND STRUCK HIM IN THE TOOTH.

PUSHING A INSULATED FIRE FILE CABINER. STRETCHED RIGHT LEG AND ANKLE UNTIL ACHILLES TENDON BROKE.

ON SEPT 3, 1996, AT 7:20 PM, OUR EE WAS REMOVINGTHE REAR-END GUARD OF THE TAIL PULLEY OF THE TROMMEL REJECT BELT TO RELEASE A ROCK WHICH HAD BECOME LODGED. AS THE BOLTS HOLDING THE GUARD WERE LOOSEN AND REMOVED THE TENSION FROM THE BELT PUSHED ON THE GUARD CAUSING THE GROUND TO SPRING UP, HITTING THE EE ABOVE THE RIGHT EYE.

EMPLOYEE WAS REMOVING A WORN SHOVEL TOOH FOR REPLACEMENT ON SHOVEL UNI #320.003. WHILE STRIKING THE TOOTH WITH AN EIGHT POUND SLEDGE HAMMER, A CHIP OF STEEL FLEW FROM THE TOOTH, EMBEDDING IN E MPLOYEES LOWER RIGHT LEG..

EE WAS USING A WRENCH TO REMOVE BELLY PAN BOLTS ON DOZER. WRENCH BROKE.

EE WAS REMOVING HYDRAULIC OIL DISTRIBUTION BLOCK ON SHOVEL 1 HOE. RESIDUAL PRESSURE IN THE SYSTEM SUDDENLY RELEASE WHEN THE LAST RETAINING BOLT WAS REMOVED SPRAYING THE EE IN THE FACE.

BOLTS ON SHOVEL HYDRALIC PUMP WERE ON SO TIGHT HE HAD TO STRAIN TO LOOSEN THEM.

EMPLOYEE WAS WORKING WITH A DRILL STEEL & PIPE WRENCH SLIPPED & CAUGHT RT HAND BETWEEN WRENCH & DRILL DECK SMASHING & CUTTING RT RING FINGER

EE WAS WORKING ON A TRUCK HE KNEELED DOWN PLACING HIS LEFT KNEE ON A LUG NUT, CAUSING A BURNING SENSATION AND SWELLING.

EMPLOYEE WAS GRINDING ON A TRUCK BED FRAME WITH AN "L" HEAD GRINDER. THE GRINDER BOUND WITH IN NOTCH AND KICKED BACK AND WOUND AROUND LEFT HAND.

EMPLOYEE WAS REMOVING A "U" BOLT FROM A BEALL TRAILER. WHILE STRIKING THE BOLT HE BUMPED HIS LEFT ELBOW ON THE TIRE. OVER THE NEXT FEW DAYS HIS ELBOW BECAME AGGRAVATED WITH INFECTION WHICH RES ULTED IN DOCTORS CARE WITH DRAINAGE AND ANTIBIOTIC PRESCRIPTION.

EMPLOYEE WAS REMOVING BEARING WITH A PRY BAR FROM THE FRONT AXLE OF A HAYES ORE TRUCK (146.001) PRY BAR SLIPPED AND EMPLOYEE SPRAINED HIS BACK

EE STEPPED OFF FUEL TRUCK, LEFT KNEE GAVE WAY AND TWISTED.

SCRAPING SHIN PACK WITH KNIFE THIN SHIM PACK BUCKLED "RAZORED" KNUCKLE.

EMPLOYEE WAS DESCENDING LADDER ON HITACHI SHOVEL. EMPLOYEE SLIPPED ON LAST RUNG AND TWISTED HIS ANKLE/LOWER LEG, RESULTING IN CLOSED FRACTURE.

EMPLOYEE WAS HANGING OVER THE GUARD RAIL CLEANINTHE CONVEYOR HIS SHIRT SLEEVE WAS CAUGHT & PULLED HIS ARM THROUGH THE PINCH POINT FRACTURING UPPER LEFT ARM

EMPLOYEE WAS STANDING ON A PALLET REACHING FOR A PARTS BOX. HIS KNEE GAVE WAY AND TWISTED THE LEFT KNEE JOINT.

54736YEE WAS PULLING ON THE HOIST CABLE WITH HIS HAND WHEN THE BRAKE SUDDENLY RELEASED & CAUGHT HIS MIDDLE FINGER OF THE RT HAND RESULTING IN A LIGHT FRACTURE

EMPLOYEE WAS LIFTING TOTE TRAY INTO SERVICE TRUCK & TWISTED BACK EXPERIENCED SHARP PAIN

DRILL OEPRATOR SLIPPED ON ACCUMULATED OIL LOCATED ONT HE OEPRATORS PLATFORM OF THE DRILL RIG. SUFFERED BACK AND NECK STRAIN.

EMPLOYEE CRAWLED UNDER WATER WAGON TO HOOK UP JUMPER CABLE, HE TWISTED HIS BACK

FOREIGN MATERIAL IN RIGHT EYE.

EMPL THAWING AIR SYSTEM ON SCRAPER.AIR TANK UNDERNEATH EXPLODED FROM PRESSURE.TANK BEING USED AT NORMAL OPERATING PRESSURE.EMPL USING ACETYLENE TORCH TO HEAT TANK.LESS THAN 30 SECONDS HEAT WAS APPLIED TO TANK.

EMPLOYEE WAS WORKING TO INSTALL A TRACK ON CAT TRACTOR. WESTERN EMPLOYEE WAS USING A PRY BAR TO LIFT END OF TRACK. EMPLOYEE WAS PUTTING A FOUR INCH WOOD BLOCK UNDER END OF TRACK. PRY BAR SL IPPED, DROPPING TRACK ONTO EMPLOYEES FINGER. RIGHT INDEX FINGER WAS CUT BY FALLING TRACK AND REQUIRED STITCHES.

EMPLOYEE WAS CHANGING OIL FILTER ON D-9H CATERPILLAR TRACTOR. OIL WAS SPILLED ON TRACKS, AS BOLTS WERE TIGHTENED TO REPLACE FILTER HOUSING. EMPLOYEE SLIPPED ON OILY TRACK AND FELL FOUR FEET TO GROUND. EMPLOYEE FELL HITTING BACK ON DOZER ARM

REMOVING BELLY PAN TO REPLACE STARTER ON CATEPLILAR 657 SCRAPER.EMPLOYEE STATED HE REACHED THROUGH SCRAPER FRAME AND BELLY PAN FOR A FLASHLITE.THE AIR JACK SETTLED CATCHING RIGHT AHND AND CAUS ING CUT TO PALM AND BACK OF AHND.

EMPLOYEE WAS ADJUSTING SPEED OF MUD PUMP FOR PREPARATION OF DRILL MUD. EXHAUST AIR ON MOTOR CAUSED FOREIGN MATERIAL TO BE BLOWN AROUND WORK AREA. FOREIGN MATERIAL BLEW INTO RIGHT EYE.

WAS GRINDING A POINT OFF THE PRY BAR USED IN WORK. THE BAR BOUND BETWEEN GRINDING WHEEL AND GUARD ON GRINDER. BAR PULLED HAND INTO THE SPINNING GRINDERWHEEL CAUSING INJURY TO LEFT HAND.

TWO EMPLOYEES WERE REPAIRING LINER IN BUCKET ON 992C CATERPILLAR FRONT END LOADER. THEY WERE USING TWO 400 AMP HOBART WELDERS TO COMPLETE THE JOB. SOMETIME DURING THE WELDING EMPLOYEE STATES H IS EYES WERE FLASHED BY THE WELDERS.

EMPL WAS PULLING ON AIR HOSE TO SANDER HAND TOOL TO GET MORE SLACK TO MOVE WITH RIGHT HAND. DROPPED LEFT HAND & HIT LEG WHILE PULLING ON HOSES WITH SANDER DISK CAUSING CUT OR ABRASION TO LE EFT LEG.

EMPLOYEE WAS LIFTING STUB SHAFT FOR DRILL STRING WAS TAKING IT TO PUT IT BE USED ON DRILL. LIFTED SHAFT TO PUT IT ON MECHANIC TRUCK FROM THE ELEVATOR IN SHOP. EMPLOYEE FELT SHARP PAIN IN LEF T GROIN.

EMPLOYEE WAS CLIMBING OFF CAT SCRAPER WHEN HE FELL ANDCAUGHT HIMSELF WITH HIS HAND ON THE SCRAPER FENDER. MUD FLAP HAD BROKEN LOOSE FROM THE FEEDER. HAND WAS INJURED BY SHARP METAL IN MUD FL AP WHERE IT WAS LOOSE.

EMPLOYEE WAS PRYING WITH A 3 FEET METAL BAR AGAINST THE ENGINE OF THE CAT SCRAPER TO REMOVE TURBO. HE FELL FORWARD WHEN IT GAVE TO THE PRESSURE AND CUT HIS LIP.

EMPLOYEE WAS CH5NGING TRACK SEGMENTS ON D9H CAT TRACTOR. HE WAS TAPPING WITH A HAMMER AND A FRRAGMENT HIT HIM IN RIGHT CHEEK.

EMPLOYEE WAS RE1AIRING A HYDRAULIC LINE TO THE RAM ON A D-9 CAT TRACTOR DOZER SLOPE BOARD. HE HAD OPENED THE CONTROL VALVE AND RELEASED THE PRESSURE ON HOSE. HE WAS BEHIND THE DOZER BLADE BETW EEN THE DOZER A9MS, IN FRONT OF THE TRACTOR RADIATOR. THE BOLTS HOLDING THE LINE BLOCK HAD WORN SO A WRENCH COULD NOT BE USED TO REMOVE THEM. AN ACETYLENE TORCH WAS USED THE CUT THE BOLTS OFF

EMPLOYEE WAS CH9CKING TRANSMISSION ON STARTING ENGINE ON REICH DRILL WHILE FEELING IN TRANSMISSION FOR BROKEN SHAFT ACCIDENTLY TURNED BACKWARD CATCHING FINGER.

EMPL TIGHTENING3NUT ON AXLE SPINDLE AFTER REPLACING WHEEL SEAL OF BOTTOM DUMP TRAILER.5'' SOCKET ON DRIVE IMPACT WRENCH BROKE AND CUT LEFT INDEX FINGER.

EMPL WAITING FO9 D-9 QUAD CAT TO BE REPAIRED WHEN HE WAS STRUCK IN THE FACE WITH FOREIGN OBJECT.

EMPLOYEE WAS TI1HTENING A BOLT ON 900 INGERSOLL-RAND COMPRESSOR WITH A SOCKET WRENCH. THE WRENCH SLIPPED OFF BOLT AND HIT EMPLOYEE IN FOREHEAD.IT CUT AND BRUISED THE LEFT EYEBROW AND FOREHEAD . 3

EMPLOYEE WAS PU7TING BOXES OF RAGS IN SHOOP STORAGE USING ELEVATOR ELEVATOR BROKE CAUSING IT TO FALL TO LOWER LEVEL (10FOOT DROP)

EMPLOYEE STATES3HE WAS LOADING DRILL MUD INTO PICKUP AS HE STEPPED ONTO THE BUMPER HIS FOOT SLIPPED HE WAS PUTTING A 50 LB BAG OF DRILL MUD INTO THE PICKUP BED HE FELL OVER TAIL GATE CAUSING I NJURY TO LEFT R3BS

EMPLOYEE STATES3HE WAS REMOVING TRANSMISSION VALVE FROM TRANSMISSION ON TRUCK. HE HAD LOOSENED ALL BOLTS WITH AN AIR WRENCH. HE WAS LEANING ON RIGHT ARM & HAND. AS HE PUT THE WRENCH ON THE FLO OR THE 5 LB. VA5VE FELL TO FLOOR HITTING THE BACK OF THE RIGHT HAND.

ALLUVIUM HIGHWA5L SLID OFF COVERING SCRAPER AS IT WAS LEAVING PIT TO DUMP AREA ALLUVIUM MATERIAL BURIED OPERATOR TO WAIST AS MATERIAL CAME THROUGH OPEN DOOR OPERATOR KICKED OUT WINDOW ON RT O F CAB TO GET OU7

EMPLOYEE WAS HO5DING DRIVE LINE ON 16 MODEL CAT MOTOR GRADER SO IT WOULD NOT FALL. HIS HELPER HIT OTHER END OF DRIVE LINE WITH HAMMER TO REMOVE IT AND WHEN IT CAME LOOSE IT CAUGHT HIS F INGER BETWEEN CIRCLE3REVERSE BOX.