Buscar en el registro

While trouble shooting a mechanical issue, EE went into the collector ring area of the 191M shovel. EE did not follow company policy for Lock out/ Tag out. During the trouble shooting EE got too close or touched the collector ring and received an electrical shock to the head area.

Miner was operating a man lift. While extending the boom the right thumb was pinched between the hand rail and a I-Beam on the Stedman crusher.

dropped a Stedman crusher hammer on his right hand/finger while changing worn hammers.

employee complains of stiff and soreness of neck and back, 2 years of wear and tear.

stepped in a hole when climbing off a machine, causing right ankle to sprain.

Miner was replacing a guard, employee strained his lower right back lifting the guard.

cut left wrist with razor knife, stripping broken wash down hose, Knife cut through easier than expected slipped and cut his wrist

PUNCTURE WOUND TO LEFT THIGH.

INJURY OCCURRED REMOVING PIN FROM EXCAVATOR BOOM. MAN WAS HIT IN THE RIGHT SIDE OF HEAD WITH THE PIN DRIVER WHEN THE PIN CAME COMPLETELY OUT OF BORE HOLE. EMT WAS CALL AND HE WAS TAKEN TO BE CHECKED OUT.

Mike was exiting his work truck, when his right leg came in contact with the ground he felt a twist and had problems putting weight on his leg.

Plant @ #4 shaker. Employee was changing the top deck screen on the #4 shaker. Slipped with the screen and slid down the chute feet first.

EMPLOYEE WAS CLIMBING STAIRS CARRYING A PIECE OF METAL, WHEN HE DROP IT, HE WENT TO CATCH IT. HE SLIPPED AND FELL DOWN STAIRS. HE STRAINED HE RIGHT SHOULDER

Helping another employee remove a 1/2 sheet of plywood from under a belt. When he picked it up to pull it out he heard a pop and felt a pain in his left lower leg. Pulled a muscle or possible tear to MCL or Achilles rupture.

Removed shive from pump,placed on ground , shive toppeled over striking left foot of employee. Left foot had swelling, brusing and a small contusion. Employee was taken for x-rays. There were no broked bones. Employee was return to lite duty work.

Inflating small tire. Tire was wrapped by a ratchet strap. Went to release strap. The strap released with great force striking left hand. Small cuts to pointer and ring finger. Stitches were required. The miner returned to work that same day.

Annual Audiogram was performed and revealed a threshold shift of 13.3 in his left ear.*** Second test found no reportable hearing loss***

While changing v-belt on crusher feeder drive come-a-long slipped off anchor point and struck victim on right shoulder.

While walking on a catwalk employee stepped on a rock and twisted his left ankle. Employee was taken to hospital and diagnosed with a sprained ankle; also referred to a bone and joint specialist for further treatment. Employee is unable to work for three days or until specialist clears him.

Loader operator hit a pot hole in travel way to load a truck. The operator said that he missed filling in the pothole during his early morning Inspection.

Operating various equipment over the past year, annual hearing exam showed a standard shift in the right ear. Documentation of shift received on 4-14-08.

Operating various types of equipment over the past year, Annual hearing test showed a standard threshold shift in left ear. Documentation of shift received on 4-14-08.

Standard threshold shift in left ear. Discovered during annual hearing exam. Documentation received on 4-14-08.

This is a standard threshold shift in the right ear. This was found through the annual hearing exams. Documentation of shift received on 4-14-08.

Injured employee was working with 4 others to replace teeth on cutter head. Employee placed his hand on the tug push knee to look over side to check teeth for damage. Tug shifted and employee's left hand was caught between cutter head teeth and push knee. Employee attempted to pull hand back and left ring finger nail was pulled away and tip of finger broken inside glove.

The employe was struck below the right knee, causing an open tibia fracture, by a piece of metal banding that was released from under a front-end loader as the employee was spotting the front end loader operator.

Employee was tending shore line for crew tug and did not release line as crew tug started reversing. Hand was caught between rope and rail. Employee was wearing gloves.

Fell approx 6 ft while exiting bulldozer. Multiple contusions and abrasion to left leg. No expected permanent temp or partial disability.

Employee sufferred a spider bite to his left forearm while performing routine maintenance on a mini-excavator.

WHILE USING A PRYBAR TO DISLODGE A ROCK FROM A MOVING TAIL PULLEY, THE BELT GRABBED HOLD OF THE PRYBAR PULLING EMPLOYEE'S HAND INTO THE MOVING BELT, SEVERING THE TIP OF HIS FINGER.

Employee was using a hammer and a chisel to remove a steering pin from an off-road dump truck. The chisel splintered and the piece of metal pierced the employee's left thigh.

Employee was walking through the plant area when he stepped in a small depression and twisted his ankle.

EE CUT PALM ON A SHARP PIECE OF STEEL WHEN EE WAS DOING NIGHT TIME MAINTENANCE ON A SHAKER. EE DROPPED TOOL AND SUFFERED A LACERATION WHILE REACHING FOR IT.

EMPLOYEE WAS CHANGING A BEARING ON A SCREEN FEED TAIL PULLEY WHEN A SHARD OF METAL BROKE OFF OF WHAT HE WAS HAMMERING ON AND PUCTURED HIS LEG.

EMPLOYEE WAS CHANGING THE WEAR PLATE ON ONE OF THE CRUSHERS. WHILE TRYING TO REMOVE A ROCK WHICH WAS LODGED IN ONE OF THE BOLT HOLES, HE SMASHED THE TIP OF HIS FINGER BETWEEN TWO PIECES OF STEEL.

EMPLOYEE WAS WORKING ON PIPELINE FLANGES AND GOT HIS FINGERS CAUGHT BETWEEN THE TWO FLANGES CAUSING THEM TO BE CRUSHED.

Ee was welding and received a flash burn due to excessive exposure to ultraviolet light.

EE WAS ATTEMPTING TO FIT A DOOR TO THE BOOSTER WITH THE HELP OF A CRANE. TRYING TO GUIDE IT INTO PLACE, HIS FOOT GOT CAUGHT IN BETWEEN A PLATFORM AND THE DOOR.

DEVELOPED A HERNIA WHILE TRYING TO PRY OPEN & CLEAN OUT THE LID ON THE BOOSTER

EE WAS GREASING A GRADER (V-JOINT) IN A CONFINED SPACE USING A COMPRESSED-AIR GREASE GUN. EE WAS HIT IN THE EYE BY GREASE WHICH CAME THROUGH THE NIPPLE AND SHOT BACK ONTO HIM. HE WAS WEARING SAFETY GLASSES BUT THE GREASE STILL MANAGED TO GET IN HIS EYE.

EMPLOYEE WAS CHANGING SCREENS ON THE TOP DECK OF THE #4 SHAKER. HE WAS USING A PRY BAR TO ADJUST THE SCREENS WHEN IT SLIPPED SMASHING HIS FINGER BETWEEN THE PRY BAR AND THE SCREEN.

EE WAS REMOVING THE FRONT BORE OF A 30" PIPE WITH AN IMPACT GUN WHEN THE PIPE MOVED AROUND TOWARDS HIM CRUSHING HIS HAND AGAINST THE WALL.

EE WAS WASHING OFF AROUND TAILPULLEY OF A PLANT STACKER WHEN A ROCK BOUNCED OFF OF STACKER STRIKING HIS FOOT.

AFTER HANDLING OILY RAGS EE ATTEMPTED TO CLIMB A LADDER WHEN HE SLIPPED AND FELL HITTING HIS KNEE ON THE LOWER RAILING.

EE WAS FIXING LIGHTS ON BULLDOZER WHEN HE SLIPPED AND FELL LANDING ON THE LEFT MID-SECTION OF HIS BODY.

EE WAS TIGHTENING BOLTS ON WEARPLATES WHEN HIS FINGER WAS CAUGHT BETWEEN WEARPLATE AND PRIMARY DOOR CAUSING LACERATION TO HIS NAIL BED ON HIS LEFT THIRD DIGIT.

EE CRASHED THE A40D VOLVO DUMP TRUCK, THAT HE WAS DRIVER INTO THE BACK (TAILGATE) SECTION OF A A40D VOLVO DUMP TRUCK.

EMPLOYEE WAS DUMPING TRAY FULL OF SAMPLE ROCKS. WENT FROM THE HAND HEIGHT TO THE SHOULDER HEIGHT & ATTEMPTED TO DUMP ROCKS WHEN EMPLOYEE HEARD & FELT A POP IN HIS RT ELBOW.

EE STATES HE WAS WORKING ON BROKEN PRODUCT PUMP SLIPPED ON HYDRAULIC OIL( IT WAS ALSO RAINING AND IT WAS WET) AND HIT HIS RIGHT ELBOW ON THE BACK OF THE TRUCK.

EE WAS GUIDING A METAL PIPE CAP INTO A PLASTIC PIPE WHEN HIS HAND GOT CAUGHT BETWEEN THE METAL CAP AND THE PLASTIC PIPE.

EE WAS GRINDING A PIECE OF METAL WHEN THE GRINDER KICKED BACK & CUT THE MEDIAL LT HAND.