Buscar en el registro

Employee suffered soft tissue injuries to the foot as a result of foot becoming rolled over by passenger vehicle.

Two employees were performing patch work on a chute while cutting a existing piece of metal approx 1'x1' approx 3/8" thick off the piece of metal hinged and swung roughly 4' and fell 4' onto the EEs foot. The sharpe corner of the metal penetrated their boot and cut the top of their foot.

Fractured index finger descending stairs. Hand caught between rail and structure

Ankle sprain from routine travel. Missed bottom step.

Employee slipped and suffered soft tissue injury to shoulder, neck, back area. Muscle strain, pinched nerve

Employee suffered laceration to left little finger performing screen change that required 1 suture.

Employee suffered a soft tissue injury to the left ankle during routine travel.

4 man crew tearing down scaffold around preheaters. a scaffold upright was caught in grating of catwalk. employee used a ladder to access catwalk, EE's harness D ring caught on railing causing employee to fall forward onto grating. Employee used arms to break EE's fall causing strain to right arm.

Employee pinched finger of left hand between frame and wrench of lathe.

Scratched by raccoon requiring immunizations

Soft tissue injury of the right knee stepping off of a ladder.

Employee suffered muscle strain to right shoulder moving innate object.

Employee suffered concussion like symptoms from being struck by object

Employee suffered fracture and laceration of finger closing dump gate.

The affected employee had their annual audiogram completed and it was reported to the mine that the employee has hearing loss in their left ear.

Employee was in the process of unhooking a piece of pipe from a strap hooked to an excavator and fell spraining left ankle.

During welding operations on the Primary Feeder, a mechanic sustained welder's flash.

Employee sprained ankle during normal travel

JCB Telehandler tires traveled over slight drop off causing vehicle to roll onto side. Employee suffered laceration to the head requiring sutures.

Employee was cutting a piece of belting with an oscillating tool. After completing the task they sat it down on the ground. While walking around to roll up belting they accidentally stepped on the battery portion of the tool and it flipped up and cut the back part of their calf. Supervisor took them to the hospital and they received 7 stitches.

Struck right hand on stationary equipment causing soft tissue contusion

Employee was using a tool to remove frozen material from a conveyor. Struck hand on framework injuring thumb.

Employee was walking along a conveyor and felt their knee pop. Knee swelling and pain. Restricted duty.

The affected employee slipped and fell, injuring their right shoulder. The employee has been placed on restricted duty.

Employee was working in a low headroom area and struck head on fixed object causing dizziness and headache.

Routine travel on asphalt, employee sprained ankle

EE had changed attachment on skid steer and noticed loose pin. EE attempted to fix the pin by reaching out of the machine. EE accidentally hit the controls and in turn pinched EE's right hand between the lift arm and the frame of the machine causing multiple fractures to the ring finger and thumb of the right hand as well as soft tissue injury.

EE was unrolling a roll of conveyor belting to splice onto an existing belt. While doing so EE felt something pop in right thumb. MRI showed tear in ligament. EE will have this repaired on 08/16/2024.

While handling a slide, EE dropped it on EE's right foot, fracturing EE's fourth and fifth toe.

EE removed a cover on a slide reached inside and had a finger struck by a rotary feeder.

Sprained right knee when exiting mini-track loader. While exiting employee stepped off of equipment with left foot and slipped on dust particles on the concrete and twisted right knee which remained on equipment.

EE was pulling on a slide under a silo when it broke free and caused EE to hit thumb on a piece of angle iron.

Fell when exiting a building

EE made contact with an elevator bucket

While sitting in a haul truck and being loaded with large material an EE experienced mid to lower back pain from the shake of the truck.

EE was dismounting from a skid loader at the quarry fuel tank when they slipped from the bucket and fell to the ground.

Employee fell while getting off conveyor and bruised their knee.

Employee dropped pry bar and caught on rotary valve which pinned their finger between the pry bar and cyclone flange.

EE was walking and slipped/tripped/fell onto left knee, fracturing patella constituting MSHA reportability.

EE was moving two railcars in the shipping area and was not able to stop the railcars in time which resulted in making contact with a dump truck that was stationed on the tracks.

Employee experienced eye irritation after cutting a chute in the Mill. EE was later diagnosed with a minor abrasion to the eye.

EE stated that EE lost consciousness while shoveling.

EE inserted an air wand into an elevator making contact with the buckets pinching a finger on the lip of the chute.

Dust fell/blew into employees eye.

While walking across the blast pattern, Employee stepped on some loose material and lost balance causing pain to their knee and leg. Employee was put in a temporary leg brace for the 3 days.

EE had been arc gouging during shift. When EE got home and laid down for the night EE noticed right eye was tearing and hurting. EE was unable to identify any specific event that led to the injury. EE went to an ophthalmologist where two foreign bodies were removed, EE had a corneal abrasion and was prescribed an antibiotic.

EE had been working on the dryer kiln and noticed a pain in EE's right wrist at the end of shift. EE was evaluated by a doctor and placed on a temporary 10 pound lifting restriction. EE was unsure of an exact activity that caused the incident.

EE was making repairs under a fuel truck when dirt fell into right eye creating a corneal abrasion requiring a prescription antibiotic after removal with a cotton tipped applicator.

EE was walking in storeroom and tripped on corner of pallet and fell. EE was released back to work with no restrictions that day. EE was still having pain and saw DR on 12/22 and was diagnosed with muscle tear. Surgery was conducted on 12/23 thus constituting MSHA reportability.

EE was entering CAT long reach when EE's right foot slipped. EE felt pain in right ankle when EE's foot hit the ground. EE was diagnosed with partial Achille's tendon tear and has missed work, thus constituting MSHA reportability.