Buscar en el registro

WHILE REPLACING MANHOLE COVERS HE TWISTED THE WRONG WAY AND STRAINED HIS BACK.

THE EE THREW DONW A PRY BAR FROM THE DECK OF A PORTABLE SCREENING PLANT. THE BAR STRUCK OR LANDED NEXT THE SCREENING PLANTS LADDER IN AN UPRIGHTPOSITION WHEN THE EE CAME DOWN THE LADDER HE HIT HIS LEFT RIB CAGE ON THE BAR

EMPLOYEE WAS CARRYING A METAL CHUTE, WHEN IT SLIPPED FROM HIS HANDS AND FELL ONTO HIS LEFT FOOT.THE EMPLOYEE WAS WEARING STEEL TOED WORK BOOTS, BUT STILL LACERATED AND BROKE HIS BIG TOE.

EE GOT DUST IN HIS EYE WHILE CLEANING AROUND THE B-3 FINISH MILL. THEY WERE WASHED OUT AND HE WAS GIVEN A PRESCRIPTION FOR MEDICATION. HE WAS WEARING SAFETY GLASSES.

EMPLOYEE STRAINED HIS LEFT SHOUDLER WHILE REACHING FOR A ROCK.

EE WAS WIPING AIR FILTER ELEMENT. RT THUMB CONTACTED SHARP EDGE. WENT TO DR AFTER SHIFT WAS OVER AND RECEIVED 4 STITCHES.

THE MECHANICAL PRESS IN THE SHOP HAS A ROTATING BASE PLATE WITH VARIOUS SIZE SLOTS IN IT. HE SPUN THE PLATE TO CLEAN UNDER IT & SMASHED THE TIP[OF THE MIDDLE FINGER ON HIS RIGHT HAND. HE WAS WEARING GLOVES AT THE TIME

EMPLOYEE HAD CHIROPRACTIC TREATMENT FOR A STRAIN TO THE LOWER BACK CAUSED BY CARRYING A METAL PLATE UP STAIRS.

EE INJURED HIS BACK WHILE REPLACING A RUBBER BOOT(CHUTE) AT THE CEMENT TRUCK LOADOUT SILO. EE WAS OFF ON PRE-SCHEDLULED VACATION THE WEEK OF JUNE 21ST.

STRAINED HIS BACK WHILE CHANGING OUT WEAR PLATESON THE MESABLE DECK.

WHILE SHOVELING A DITCH LINE HE STRAINED HIS BACK.

CAUGHT RING ON CATWALK, SUTURES REQUIRED.

EE GOT HIS RT INDEX FINGER CAUGHT BETWEEN TWO METAL COVERS. REQUIRED 4 STITCHES.

WHILE LIFTING A PIECE OF TRACK DRILL STEEL HE STRAINED HE S BACK.

WHILE LIFTING A SHEET OF STEEL PLATE, THE SHEET SLIPPED FROM THE "C" CLAMP HOLDER AND SMASHED THE END OF HIS LEFT RING FINGER. THE "C" CLAMP WAS NOT PUT ON PROPERLY.

WHILE RELEASING THE BRAKE FLUID PRESSURE ON THE WHEEL DRUM CYLINDER THE BRAKE FLUID WENT IN THE LEFT EYE.

EE WAS ADJUSTING THE ALIGNMENT SWITCH FOR THE B3 CLUTCH WHEN A PROTRUDING BOLT STRUCK HIS LEFT HAND.

EMP WAS SHOVELING MUD FROM BENEATH THE CONVEYOR BELT. EXPERIENCED BACK PAIN RADIATING DOWN LEFT LEG.

A MECHANIC WAS CLEANING OFF A SURFACE HE WAS WORKING ON WITH COMPRESSED AIR.A PIECE OF METAL FLEW ACROSS AND HIT HIM IN THE RIGHT EYE.

INJURED WAS LIFTING A FIVE GALLON JUG OF WATER.

THE EMPLOYEE SMASHED THE MIDDLE FINGER ON RIGHT HAND BETWEEN TWO ROCKS. TH EEMPLOYEE WAS TRYING TO UNPLUG THE CRUSHER.

SHOVELING UNDER A CONVEYOR BELT.

EMPLOYEE WAS REPAIRING BRAKE SYSTEM. EMPLOYEE WAS ATTEMPTING TO REPLACE BAD DIAPHRAGM IN BRAKE CAN. BRAKE CAN WAS MISSING "T" BOLT. FINGER WAS JAMMED WHEN SPRING CAP CAME OFF.

EE HAS HAD AN ONGOING BACK PROBLEM FOR YEARS. HESEES A LOT OF DOCTORS FOR HIS CONDITION. HE MISSED WORK ON 3/31/95.

THE EMPLOYEE WAS PULLING ON A CABLE TO BE INSTALLED ON HIGH LINER.

EMPLOYEE WAS PICKING UP HIS TOOLS AFTER FINISHING A JOB. EMPLOYEE SET HIS TOOL BOX ON TOP OF AN ELECTRIC MOTOR IN ORDER TO PICK UP A BAR. TOOL BOX FELL OFF MOTOR AND ON LEFT FOOT.

EMPLOYEE SAID HE PULLED HIS BACK OUT AGAIN WHILE CHANGING STEEL. HIS DR SAYS NOW THAT HIS BACK COULD BE HURTING FROM HIM HAVING FLAT FEET. HE GAVE EE SOME NEW ARCHS FOR HSI BOOTS AND EE SAYS HE FEELS FINE NOW. SI IS IT A ACCIDEN TOR NOT.

EMPLOYEE IS SAYING HIS BACK IS HURTING BECAUSE OF ALL THE LIFTING HE'S BEEN DOING OVER THE LAST FEW YEARS. THE EMPLOYEE IS TRYING TO OPEN A PRE-EXISTING CLAIM. THE ACCIDENT HAPPENED IN 1988. T HE EMPLOYEE WAS WORKING FOR AN INDUSTRY COMPANY THAT DID NOT REPORT TO MSHA.

LOOSE DIRT ON HIS HARD HAT FELL INTO HIS LEFT EYE.

SWOLLEN RIGHT KNEE- CLEANING UP.

EE WAS LIFTING A LINER PLATE. AS EE LIFTED LINER PLATE, HE FELT A CRAMP LIKE SENSATION IN HIS LEFT SHOULDER AND AT THE BASE OF HIS NECK. (EE BEGAN LOSING TIME ON 07-01-94)

TWO PEOPLE THROWING CRUSHED AIR CLEANERS INTO GARBAGE BURNER. EMPLOYEE 1 CAUGHT HIS HAND UNDER THE AIR CLEANER EMPLOYEE 2 WAS THROWING

EE WAS REPAIRING QUARRY CRUSHER. EE WAS REMOVING STEEL CRUSHER CAP. THE HEAVY CRUSHER CAP SLIPPED AND FELL ON EE'S HAND.

EMPLOYEE SPILLED GASOLINE ON LEG 12/30/88 REOCCURING FLAIR UP

EMPLOYEE WAS ATTEMPTING TO START PORTABLE AIR COMPRESSOR. EMPLOYEE PULLED STARTER ROPE ON COMPRESSOR. WHEN HE PULLED STARTER ROPE. HE STRAINED HIS BACK.

EMPLOYEE WAS WATCHING FELLOW EMPLOYEE UTNANGLE A 2" HYDRAULIC HOSE FORM AN 1/0 WELDIGN CABLE. WHEN FELLOW EMPLOYEE JERKED HOSE FREE FROM CABLE, COUPLING OF HOSE STRUCK EMPLOYEE'S FACE.

HE WAS USING AN AIR FILTER FOR A BOBCAT AS A SPACER. WHEN HE TOOK THE AIR FILTER OUT FROM UNDER THE CAB AND THROUGH THE FILTER HE HADN'T NOTICED THAT HE BENT THE CASING AND A SHARP EDGE WAS NO W EXPOSED. THE SHARP EDGE OF THE AIR FILTER CUT THE LEFT INDEX FINGER.

LIFTING A PIECE OF STEEL TUBING

WHILE LIFTING DRILL STEEL EE TWISTED & PULLED HIS BACK OUT.

INDIVIDUAL WAS GETTING READY FOR WORK HE WAS BENT OVER & WHEN HE STOOD UP HIS HEAD HIT THE CORNER OF THE METAL LOADER DOOR & CUT HIS HEAD I T REQUIRED EIGHT STITCHES

EE WAS DROPPING AIRSLIDE FROM B3 MILL. DUST COLLECTRO PIPE FELL WHEN THE AIRSLIDE WAS MOVED. DUST COLLECTOR PIPE STRUCK EE ON RIGHT WRIST AND LEFT THIGH.

EMPLOYEE WAS REPAIRING A COMPRESSOR FROM UNDENEATH THE UNIT.AS HE WAS MANUVERING FROM UNDER THE MACHINE,FOREIGN PARTICLES DROPPED FROM THE UNIT INTO HIS FACE.A PARTICLE LODGED IN HIS RIGHT EYE AND WAS NOT REMOVED UNTIL THE NEXT DAY WHEN DISCOMFORT BECAME APPARENT.HE THEN REPORTED IT TO HIS SUPERVISOR AND WENT TO A CENTER FOR MEDICAL ATTENTION.

13354PTED TO OPEN DRAIN VALVE ON SAND CLASSIFER PULLED R WRIST

THE EMPLOYEE WAS REMOVING MOTOR FROM THE SCALPER ON THE CRUSHING PLANT. AS THE MOTOR WAS BEING REMOVED THE MOTOR SLIPPED AND ROLLED OVER HIS ELBOW CAUSING INJURY TO THE ELBOW.

LIFTING MATERIALS

HIT LEFT WRIST TAMING BOLTS OUT TO REMOVE STARTER FROM BOBCAT

A GUARD HAD BEEN TAKEN OFF DURING MAINTENANCE OF BC 4 FEED BELT IN B3 FINISH MILL DEPT EMPLOYEE LIFTED GUARD & TWISTED AS HE WAS ATTEMPTING TO RELOCATE GUARD IN ITS PLACE THUS STRAINING HIS BA CK

EMPLOYEE BENT OVER TO PICK UP TOOL BOX. EMPLOYEE STRAINED HIS BACK AS HE ATTEMPTED TO PICK UP THE TOOL BOX.

RIGHT RING FINGER CUT WHILE REMOVING BROKEN GLASS FROM CRUSHER SHACK WINDOW.

THE CREW BROUGHT THE WELDER DOWN USING THE ELEVATOR. AS THEY BROUGHT THE WELDER OUT OF THE ELEVATOR, IT ROLLE FORWARD AND PUSHED EMPLOYEE AGAINST THE WALL.