Buscar en el registro

IRONWORKER COMPLAINING OF CRAMPS IN LEG (LEFT) FROM MOVING FROM ONE PIECE OF IRON TO ANOTHER CLUTCHING BEAMS WITH INNER THIGH TIGHTENING BOLT. EE STATES HAS BRUISE ON THIGH. DR. SAID LIMITED L IMBING FOR COUPLE OF DAYS.

EE STATED HE AND TWO OTHERS WERE MANUALLY PLACING A PART OF A GEAR. THE GEAR SLIPPED WHEN THEY PUT IT DOWN PINCHING HIS RIGHT MIDDLE FINGER.

PUSHING RODS IN TO CLOSE SILO. LAST ONE WENT IN EASIER THAN THE REST AND EE'S HAND HIT SILO CUTTING FINGER (3 STITCHES).

CONST LABORS MOVING METAL FORMS GOT FINGER BETWEEN TWO FORMS PINCHED MIDDLE FINGER.

EE WAS IN CLINKER COOLER DUST COLLECTOR TO REMOVER SCREW. ONE EE ASKED THE CONSOLE TO CUT BACK ON F26 FAN. WHEN THEY DID THE DUST IMMEDIATLY BEGAN TO SETTLE GETTING INTO EE EYES.

EE WAS CLEANING OUT THE BOTTOM OF THE TURN HEAD WHEN HANDLE ON THE BY PASS GATE RELEASED AND HITHIM IN THE CHEST AREA BRUISING HIS RIBS.

WHEN REMOVING COOLER HATCH TO CLEAN COMPARTMENT FELT SHARP PAIN IN LEFT WRIST.

WHILE I WAS MOVING HAMMERS OUT OF WAY I FELT A PULL IN MY LOWER BACK.

EE WAS TAKING DOWN STAIR SCAFFOLDING. EE WAS LOWERING SCAFFOLD SECTION BY ROPE TO EE'S BELOW. ONE PIECE GOT HUNG UP ON SCAFFOLD BELOW, APPROX 4' ABOVE GROUND. EE PICKED UP THE PIECE TO FREE IT WHEN THE EE ON TOP STARTED TO LOWER THE PIECE, THE SCAFFOLDING PRESSED DOWN AND PINCHED THE EE'S THUMB.

LIFTED AND PLACED 50# BOXS OF WELDING ROD IN CABINET AND FELT TWINGE IN BACK.

EE WAS MOVING A PIECE OF 8" DUCTING. THE EE PICKED UP ONE END OF THE DUCTING AND A FELLOW EE PUSHED IN THE OTHER END OF THE DUCTING. THIS CAUSED THE EMPLOYEE'S THIRD MIDDLE FINGER TO BE SMASHE D AGAINST A HANDLE WHICH WAS WELDED TO THE TOP OF OF THE SOUTH DRAG CONVEYOR.

EMPLOYEE WAS REACHING AND PULLING ON DRILL LEVERS WHEN HE PULLED A MUSCLE IN HIS RIGHT HAND.

EE WAS LOADING BAGS ONTO PALLET, WHEN HE FELT PAIN IN HIS WRIST.

PULLING ON FUEL HOSE IN ORDER TO FUEL MOBILE EQUIPMENT.

EE WAS SLIDING A BOX WITH 8 BAGS OF ICE IN IT ON THE SEAT OF A TRUCK.

EE WAS HOLDING ONTO BAR OF LOADER WHILE STEPPING OFF. HE FELT A PULL IN HIS LEFT ARM INSIDE HIS ELBOW.

EMPLOYEE WENT INSIDE FINISH MILL DUST COLLECTOR TO VACUUM UP FEED. A WALL OF FEED GAVE WAY, PUSHING EMPLOYEE THROUGH DUST COLLECTOR. FEED GOT INTO EMPLOYEE'S EYE.

EMPLOYEE WENT INSIDE FINISH MILL DUST COLLECTOR TO ASSIST IN VACUUMING UP FEED. A WALL OF FEED GAVE WAY, PUSHING EMPLOYEE THROUGH DUST COLLECTOR. FEED GOT INTO HIS EYE & HE HURT HIS KNEE TRY ING TO STOP HIMSELF.

EE WAS CLIMBING ACROSS A PIPE, WHEN HE STRUCK THE LEFT SIDE OF RIBCAGE ON VALVE HANDLE ON TOP OF BUFFER SILO.

WHILE MOUNTING THE MOTOR GEAR BOX ASSEMBLY FOR THE DRIVE IN BY IT, IT SLIPPED AND PINCHED RIGHTFOREARM AGAINST THE WALL.

EMPLOYEE WA REMOVING AND REPLACING D.C. SCREEN, WHEN HE STRAINED HIS LOWER BACK.

EMPLOYEE TURNED HIS BODY WHILE ENTERING KILN HOPPER TWISTING HIS LOWER BACK.

INJURED CLAIMS WHILE REACHING OVER RAILING TO RETRIEVE BROKEN BAG, THIS MOVEMENT CAUSED EE TO PULL MUSCLES IN LOWER BACK.

EE PULLED HARD TO OPEN STUCK COAL CAR DOOR JOLTING ACTION PULLED MUSCLES IN RIGHT SHOULDER

EMPLOYEE PULLED 6" PLASTIC FLEX FROM MATERIAL AND THE FLEX JUMPED HITTING THE RIGHT SIDE OF HIS HEAD.

EE WAS REMOVING HUB FROM SHAFT OF ROTARY FEEDER WHEN HE FELT PAIN IN HIS LOWR BACK

EE WAS REMOVING GUARD FROM SCREW COUPLING, WHEN GUARD FLEW UP AND STRUCK HIM IN THE CHIN.

WHILE HANDLING & MOVING COUNTERTOPS, A CLEAR SLIVER OF MATERIAL ENTERED INTO EE'S RIGHT THUMB. IT BECAME INFECTED AND MATERIAL HAD TO BE REMOVED BY DR. ON JUNE 2, 1999.

EE STRAINED BACK WHILE REMOVING DECK PLATES.

BOTTOM OF A HI-SPEED COUPLING COVER FELL AND SLID DOWN EMPLOYEE'S RIGHT LEG.

WHILE EMPLOYEE WAS MAKING REPAIRS TO A COAL MILLJOURNAL ASSEMBLY, HE TRAPPED HIS FINGER BETWEEN THE ROLLER JOURNAL ARM AND THE COAL MILL JOURNALRETURN SPRING.

WHILE LIFTING WATER PIPE OUT OF SCRUBBER, EMPLOYEE PINCHED HAND BETWEEN PIPE AND DOOR FRAME.

WHILE INSTALLING HOUSING, HOUSING WEDGED HAND BETWEEN OVERHEAD BEAM AND HOUSING COVER.

EMPLOYEE WAS ATTEMPTING TO PUT AC UNIT INTO WINDOW, WHEN IT SLIPPED, BREAKING HIS LEFT KNEE.

EE WAS REMOVING CHUNK FROM UNDER MAGNET BELT, WHEN CHUNK ROLLED DOWN CATWALK AND STRUCK RIGHT CALF.

EE HIT ELBOW ON METAL RAILING

WHEN EE CRIMPED AIRHOSE TO SEAL (4OPSI) THE HOSE CAME LOOSE FROM CLAMP CAUSING HOT GREASE TO BLOW OUT ON HIS HAND REQUIRING MINOR TREATMENT OF BURN AT DRS OFFICE

EE WAS CLEANING DUST COLLECTOR WHEN HIS LEFT SHOULDER POPPED, CAUSING PAIN.

EE WAS STEPPING OFF MANLIFT TO TIE OFF HIS HARNESS ON THE WEST END OF (TRAIN) CAR DUMPER. WHILE EXTENDING HIS LEFT LEG HE FELT A TWINGE IN HIS INNER THIGH AREA. HE RETREATED BACK TO THE LIFT PLATFORM AND CAME DOWN

EE WAS HGETTING IN THE BACK OF A TRUCK TO THROW AWAY SCRAP METAL WHEN HIS RIGHT KNEE POPPED.

INDIVIDUAL PULLED A MUSCLE IN HIS RIGHT SHOULDER AS HE PULLED HIMSELF OUT OF THE DUST COLLECTOR.DID NOTREQUIRE MEDICAL ATTENTION UNTIL 1-16-98. INDIVIDUAL WAS PLACED ON LIGHT DUTY ON 1/20/98.

INDIVIDUAL WAS STANDING ON DOCK NEAR A BALLARD AND CABLE FROM THE BARGE SLIPPED THROUGH THE CLAMPS ADN STRUCK THE INDIVIDUAL IN THE BACK OF HIS ANKLE.

ALIGNED SHAFT ON MOTOR COUPLING-SHAFT SLIPPED AND FINGER WAS PINCHED.

WHILE CARRYING BRICK RING (KILN #1) UNDER PLATFORM, TO FRONT PLATFORM. WITH 4 OTHER MEN, RING TIPPED. STRUCK LEFT SHOULDER RESULTING IN CONTUSION.

INDIVIUAL WAS FUELING A LOADER AND REACHED UP TO REMOVE THE FUEL NOZZLE AND FELT A SHARP PAIN IN HIS RIGHT SHOULDER.

WORKING ON THE KILN PRECIPITATORS, THE INDIVIDUAL HIT HIS HEAD ON THE KILN SHELL FAN WHICH WAS SITTING ON THE UPPER LEVEL.

HE WAS LOADING BARRELS ONTO A BOBCAT. HE GRABBED THE BARREL TO SPIN IT AROUND AS IT SPUN AROUND IT GRABBED AHOLD OF HIS GLOVE AND CUT HIS LEFT THUMB WHICH REQUIRED 9 STITCHES.

INDIVIDUAL WAS INSERTING A SHIM UNDERNEATH A MILL GEARBOS AND THE SHIM BOUND UP CAUSING IT TO SLICE HIS RT INDEX FINGER.

WHILE INDIVIDUAL WAS CHANGING GUDGEN PIN, SCREW DROPPED AND A DRIFT PIN STRUCK EE ON THE RT SIDE OF HIS HEAD AND GUDGEN PIN FELL ON HIS RT HAND.

WHILE INDIVIDUAL WAS WORKING ON CIRCULATING PUMPCASING, RIGHT THUMB PINCHED BETWEEN CHAIN ATTACHED TO HOIST AND PUMP CASING.