Buscar en el registro

HE WAS HELPING MOVE A GEAR BOX, WHEN THE SHAFT HE WAS HOLDING BROKE, SNATCHING & SPRAINING HIS RIGHT HAND. AFTER REST DID NOT HELP THE HAND TO HEAL, SURGERY WAS PERFORMED ON 4/18/02 TO REATTAC H A LOOSE LIGAMENT IN THE HAND.

WAS TIGHTENING THE TENSION ROD AT THE PRIMARY CRUSHER WHEN THE ROD BROKE, AND THE TORQUE EXTENSION HANDLE END RAKED ACROSS HIS HAND CAUSING A DEEP LACERATION REQUIRING STITCHES TO CLOSE.

EE WAS LIFTING SCREENS INTO PLACE ON THE BOTTOM DECK OF #2 SCREEN.

EE WAS RAISING THE BALL LATCH ON THE GREASE TRAILOR WHEN HE TOOK PIECE OF STEEL PIPE AND TRIED TO KNOCK THE LATCH UP. WHEN HE DID HE SMASHED HIS LEFT RING FINGER BETWEEN THE PIPE AND THE THREE WAY HITCH.

PAD EYE ON JAW PLATE PULLED LOOSE NA DHIT EMPLOYEE ON THE LEFT SIDE OF NECK REQUIRING 4 STITCHES.

EE WAS ATTEMPTING TO CLEAR A ROCK FROM THE TAKE UP PULLEY. EE WAS STANDING ON THE GROUND WITH LEFT HAND HOLDING THE PIPE THE TAKE UP PULLEY WEIGHT OPERATES IN. HE SIGNALED FOR THE BOLT TO BE B UMPED AROUND WHICH SHOULD CLEAR THE ROCK. WHEN THE BELT (BOLT?) WAS BUMPED THE COUNTERWEIGHT SWUNG SIDEWAYS PINCHING EMPLOYEE'S LEFT INDEX FINGER.

INJURED PERSON WAS ASSISTING IN THE REMOVAL OF A MOTOR SHIV ON THE PRIMARY JAW CRUSHER. UPON DISASSEMBLY THE SHIV FELL TO THE GROUND PINCHING HIS LITTLE FINGER ON THE LEFT HAND BETWEEN THE SHI V AND THE GROUND.

INJURED WAS CARRYING A PIECE OF METAL TUBING TO BE USED FOR A SCALE GUARD. HE SLIPPED AND FELL AND THE TUBING (WEIGHING 60-80 LBS) LANDED ON HISLEFT HAND.

FELL THROUGH JAW CRUSHER APPROX 10' MOVABLE JAW WAS NOT STATIONARY-EMPLOYEE WAS REMOVING A WEDGE.

GRIZZLY FEEDER WAS NOT WORKING PROPERLY/OPERATOR WENT TO DRIVE SYSTEM FOR A VISUAL INSPECTION/LEANING OVER MOTOR ALBWING HIS GLOVE TO BE CAUGHT PULLING HIS HAND INTO PINCH POINT CAUSING LACERA TION TO HIS HAND. GRIZZLY FEEDER

EE AND EE WERE TOLD TO CARRY SCREEN CLOTH TO THE TOP OF #2 SCREEN DECK, EE WAS BEING TREATED FOR A PRE EXISTING RIGHT SHOULDER PROBLEM. EE DID NOT MAKE THE FORMAN UNDERSTAND HE HAD A PROBLEM WITH HIS SHOUULDER. EE INJURED HIS RIGHT SHOULDER WORSE BY CARRING THE WEIGHT OF THE SCREEN CLOTH.

WHILE CHANGING SCREEN CLOTH ON #3 SCREEN TOWER, INJURED & EMPLOYEE WERE ATTEMPTING TO THROW USED SCREEN CLOTH FROM CUT WALK WHEN A PROTRUDING WIRE CAUGHT THE TOP OF INJURED'S RIGHT HAND CAUSIN G A 1" LACERATION REQUIRING 6 SITCHES.

WHILE UNLOADING A NEW WELDING MACHINE, THE EMPLOYEE WAS HOLDING ON TO THE TIE DOWN STRAPS, WHICH WERE HOLDING WELDING MACHINE TO A PILOT. WHEN HE WENT TO DISMOUNT FROM THE VEHICLE, HE DID NOT LET GO OF THE METAL STRAP. HE CUT HIS RIGHT HANDRING FINGER AND HAD TO HAVE 5 STITCHES.

THE EMPLOYEE WAS PULLING A CABLE ON THE DRAGLINE. HE PULLED TOO HARD AND SPRAINED HIS LEFT SHOULDER.

GREASING UNDE RWATER TRUNK. SAFETY SHOES WERE TO BIG. AS HIS FEET BENT HIS LEFT FOOT, HSI BIG TOE BECAME CAUGHT ON THE END OF THE STEEL PLATE AND PULLED OFF 1/2 OF THE TOE NAIL.

THE ROCK GUARD ON 1 SCREEN HAD BECOME WORD AND AS EE WAS CLEANING UP CONVEYOR SPILLAGE AROUND THE CONE CRUSHERS A PIECE OF ROCK WEIGHTING APPROX. 10 ACCORDING TO EE COME THERE THE GUARD AND ST ACK EE IN THE MIDDLE OF HIS BACK. THE ROCK FELL APPROX. 10-15 FEET. THERE WERE MINOR BRUISES NO DISCORDATION TO THE BACK.

INJURED AND OTHERS WERE CHANGING OUT BOTTOM PIECE OF 1" SQ OP SCREEN CLOTH ON 2ND DECK OF DOUBLE-DECK SCREEN. NEW PIECE WAS FED THROUGH 8" GAP BETWEEN SCREEN FRAME AND CHUTE GATE WITH INJURED ON INSIDE PULLING IN THE SCREEN CLOTH. 2" OF EDGE WAS LEFT ON EDGE OF GATE WHILE HELPER ENTERED SCREEN DECK TO AID IN FINAL POSITIONING OF SCREEN. DURING THIS, THE SCREEN SLIPPED AND DEFLECTED

EE WAS CHANGING OUT OIL FILTER ON UNDER SIDE OF GROVE CRANE. THE OILY FILTER CANISTER WAS TILTED ON EXTRACTION AND CAME IN CONTACT WITH OBSTRUCTING HOSES CAUSING IT TO SLIP OUT OF EE S HAND A ND FALL. LEFT HAND WAS LINED UP WITH CANISTER AND ON CONTACT WITH HIS FINGER, THE BEVELED EDGE OF THE CANISTER SEVERED THE TIP OF THE FINGER ALMOST BACK TO THE CUTICLE. AFTER TREATMENT OF THE

PLANK CREW WAS PULLING BELTING ONTO NEWLY BUILT CONVEYOR FRAME (NOT UNDER POWER). EMPLOYEE WAS ASSISTING BY TURNING HEAD PULLEY BY HAND, WHEN HE CAUGHT TIP OF RT INDEX FINGER IN PINCH POINT.

EMPLOYEE AND OTHERS WERE REPAIRING WORN WEAR PLATE IN FEEDER BOX ON THE JAW CRUSHER BY CUTTING AWAY WORN STEEL USING OXY-ACET TORCH AND WELDING NEW BACK IN PLACE. WORN PIECE WAS CUT AWAY AND L AID A SIDE WHILE NEW WELDED BACK IN. DURING CLEAN UP, INJURED AND OTHER PASSED A 3/4" X 4" X 13" PIECE OUT TO OTHER EMPLOYEE. STEEL WAS STILL HOT. DURING HANDLING, THE PIECE SLIPPED AND SLID

INJURED AND OTHERS WERE ADDING FRAME SUPPORT STEEL (1" X 1 1/2" ANGLE IRON) TO DROPBALL BOOM. INJURED HAD JUST CUT A 2' LENGTH WEIGHING APPROX. 2 LBS. AND PASSED THIS PIECE TO THE WELDER. HE D ID SO BY TURNING ONLY AT THE WAIST AND "TOO FAST". HE EXPERIENCED SOME PAIN THAT DAY AND ALL THE NEXT. ON 12/12 HE WAS SENT TO COMPANY PANEL DOCTOR WHO DIAGNOSED THE INJURY AS A PULLED MUSCLE

A SCREEN SIDE PLATE W/WEAR STEEL THAT THE INJURED HA DBEEN WELDING ON FELL APPROX 3' OFF THE 6"X6"X3' WOODEN BLOCKS (SET ON END) THAT HE HAD BEEN USING AS A WORK BENCH. THE INJURED'S TORCH ST RIKER WHICH WAS HUNG FROM HIS BELT CAUSED THE PLATE TO FALL OVER ONTO THE TOP OF HIS FOOT CAUSING SOME BRUISING AND A SPRAIN. DR RECOMMENDED NEXT DAY OFF, BUT EMPLOYEE REUTRNED TO WORK DOING

EMPLOYEE AND HELPER PICKED UP A 30 HP MOTOR FROM THE SCREEN PLATFORM AND PLACED IT ON THE DRIVE PLATFROM.INJURED FELT SOME PAIN AFTER WORK WAS DONE AND MORE OVER WEEKEND.INJURED SOUGHT PERSONA L PHYSICIAN TREATMENT ON 11-08.INCIDENT ORIGINALLY REPORTED AS PRE-EXISTING MEDICAL PROBLEM FLARE-UP WITH NO MENTION OF IT BEING WORK RELATED UNTIL 11-21.

EMPLOYEE TOOK 5 GAL. CAN OF OIL UP TO END OF TUNNEL BELT TO ADD OIL TO SPEED REDUCER GEAR BOX THAT WAS LEAKING. EMPLOYEE CLIMBED UP ONTO CONVEYOR AND REACHED DOWN SIDEWAYS TO PICK UP CAN OFF O F IDLER PLATFORM AND THEN LIFTED CAN CLEAR OF INNER GUARDRAIL ONTO THE BELT. HE FELT A PULLING IN HIS BACK BUT CONTINUED TO WORK THE REST OF THE DAY. ON 7-2, HE REPORTED A WORSENING PAIN IN H

INJ GOT FINGER LACERATED WHEN PIECE OF SCRAP METAL THAT HE & HELPER WERE TRYING TO MVOE WAS DROPPED BY HELPER. HELPER LOST GRIP ON END OF METAL CAUSING PIECE TO FALL. INJ'S FINGER WAS CAUGHT B Y METAL AGAINST STEEL BEAM THAT THEY WERE TRYINGTO GET PIECE OV ER. INJ TAKEN TO HOSPITAL EMERGENCY ROOM WHERE STITCHES WERE APPLIED TO REPAIR WOUND. INJ RETURNED TO WORK SAME DAY.

EMPLOYEE AND OTHER WERE REPLACING TWO 8D 12V BATTERIES FROM UNDER THE SEAT OF THE WHEELED DOZER AND THE TASK REQUIRED A GREAT DEAL OF PULLING, BENDING AND TWISTING BY THE INJURED TO MOVE THE B ATTERIES BOTH DURING REMOVAL OF THE O9LD AND INSERTION OF THE NEW ONES. INJURED FELT PAIN AFTERWARDS BUT CONTINUED TO WORK ON 4/4 AND 4/5. EMPLOYEE OBTAINED TREATMENT ON HIS OWN ON 4/9 BUT DI

INJURED WAS HELPER WERE UNHITCHING PORTABLE WELDER FROM BUMPER OF PICKUP BY HAND SINCE TRAILER JACK WOULD NOT GET TRAILER HITCH CLEAR OF BALL ON UNLEVEL GROUND WHERE POSITIONED. TONGUE WAS LIF TED MANUALLY TO CLEAR BALL. TRAILER ROLLED FORWARD AND TONGUE CAME DOWN CATCHING INJURED'S FINGER AGAINST BUMPER LACERATING IT AND ALSO BREAKING THE TIP OF THE FINGER. INJURED TAKEN TO EMERGE

EMPL WAS CLEANING UP BALLROCK IN PIT. HE WAS OPERATIN D8CAT DOZER. ROCK GOT CAUGHT BETWEEN BLADE & OLLER FRAME. EMPL PULLED ON ROCK. ROCK CAME OUT EASIERR THAN HE EXPECTED. HE DID NOT HAVE GOO D GRIP ON IT., HE DROPPED IT & IT SLID DOWN LEG CAUSING LACERATION TO LEFT SHIN. ROCK WEIGHED ABOUT 40 LBS.

GREASE HAUL TRUCK FITTING LOOSE AT AIR POWERED GREASE GUN GU N SLIPPED IN WATER, CLEANING MIX SPLASHED IN EYE

EMPLOYEE WAS HELPING SUPERINTENDENT WITH CONVEYOR BELTING AT BELT STORAGE AREA AT SHOP HE STUMBLED DURING THIS & RECEIVED SCRATCHES ON HIS RT ARM FROM SAW-BRIARS THAT WERE GROWING IN THE AREA EMPLOYEE TREATED SCRATCHES DURING THE DAY WITH ANTISEPTIC SPRAY & CONTINUED TO WORK OVER WEEKEND SCRATCHES GECAME INFRECTED & ON MONDAY 09-27-90 WAS TAKEN TO COMPANY DOC TO HAVE THE INFECTION

EMPL & OTHERS WERE SETTING 1" X 12" X 20' PIECE OF STEEL IN JAW FEEDER FLOOR.EMPL SET PIECE IN FLOOR AND RERIGGED CHAIN TO SET PIECE IN FINAL POSITION USING LOOPED CHAIN THROUGH LOOPED CHAIN W ATTACHED TO CLAMP ON STEEL PLATE.INJ GUIDING PIECE INTO PLACE WHEN SLACK IN CHAINS CAME OUT AND STEEL DROPPED STRUCK INJ FOOT NEAR STEEL.X-RAYS TAKEN-FX OF 2 METACARPALS..RETRW ON RESTRI DUTY

EE WAS CLEANING UP IN THE SHOP. HE STARTED FEELING PAIN IN THE LOWER LEFT GROIN AREA THERE WAS NOTHING SPECIFIC THAT CAUSED IT. HE HAD SURGERY FOR A HERNIA IN THE RIGHT GROIN AREA JULY 24TH, L 989. THIS SEEMS TO BE A WEAK AREA.

EMPLOYEE WAS REPARING A PLATFORM AT THE PLANT WHEN A P.C. OF ANGLE IRON SLIPPED AND CUT HIS LEFT ARM.

INJURED AND OTHER EMPLOYEE WORKING ON HEAD PULLEY REMOVED MOTOR AND SAT MOTOR ON CONVEYOR.DURING REASSEMBLY OF HEAD PULLEY MOTOR SLID OVER ONTO EMPLOYEES FOOT CATCHING IT AGAINST THE HEAD PULL EY.INJURED WORKED REST OF DAY AND NEXT 2 BUT DEVELOPMENT OF BRUISING CAUSED HIM TO GO TO A DOCTOR.X-RAYS TAKEN SHOWED NEGATIVE,FOOT BANDAGED AND TETANUS ANTITOXIN ADMINISTERED AND PRESCRIPTIO

EMPLOYEE WAS SHOVELING UNDERNEATH THE SCALES. HE WAS USING A HAND SHOVEL WHEN HE STARTED FEELING PAIN IN THE LOWER RT SIDE GROIN AREA. HE FINISHED THE SHIFT OUT AND DID NOT REPORT ANYTHING THA T DAY. MONDAY JULY 10TH HE CAME IN AND REPORTED IT. HE WENT TO THE DOCTOR AND WAS DIAGNOSED AS HAVING A HERNIA. THE DOCTOR DID NOT PRESCRIBE ANY MEDICATION.

SURGE STONE FILLED CHUTE FROM BOTTOM TO TOP DUE TO THE EXIT END OF CHUTE. EMPLOYEE OPENED ACCESS DOOR TO CHUT AND BEGAN TO CLEAR CHUTE TO GET THE JAM WHILE REMOVING A PIECE OF STONE ANOTHER P IECE DISLODGED AND FELL STRICKING EMPLOYEES HAND. EMPLOYEE TAKEN TO DOCTOR WHO CLEANED AND X-RAYED HAND.

EMPLOYEE AND FOREMAN HAD POSITIONED FRESH OIL DRUM AGAINST TILTED CRADLE WHEN TILTED CRADLE AND DRUM BACK INTO POSITION THE FLESHY PART OF INJURED FINGER GOT CAUGHT BETWEEN DRUM AND CRADLE EDG E LACERATING . THE FINGER EMPLOYEE WAS TAKEN TO CO PORTAL DR HAD X RAY TAKEN HOSPTIAL WHICH SHOWED NEGATIVE CO DR CLEANED STITCHES AND BANDERED FINE OR ISSUED A PRESCRIPTION FOR PAIN AND RELE