Esta búsqueda
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
TWO MEN WERE CHANGING TOGGLE BLOCKS ON PRIMARY JAW. THEY WERE TAKING THE NUTS OFF OF THE TENSION ROD, THE ROD SNAPPED PROJECTING THE SPRING WASHER INUT AND THE BUSTENED OFF. ONE MAN EE, WAS ST RUCK ON FOREHEAD. HE WAS TAKEN TO HOSPITAL AND RECEIVED 8 STITCHES.
EE WAS CHANGING AN ANVIL ON ISC CRUSHER & STUCK IT WITH A HAMMER A CHIP BUSTED OFF THE HAMMER STRIKING EE IN THE CHEEK REQUIRED 4 STITCHES
EE WAS CUTTING THE CORNERS OF A CONVEYOR BELT WHEN THE KNIFE SLIPPED AND CUT HIS RIGHT LEG ABOVE THE KNEE.
EMPLOYEE WAS HAMMERING OUT THE LAST BOLT ON A CUTTING EDGE. HE WAS STANDING WITH HIS LEFT FOOTUNDER THE CUTTING EDGE WHEN THE BOLT CAME FREE AND THE CUTTING EDGE FELL.
WELDING ON THE PIPELINE FROM DREDGE WHEN TAKING COMA LONG OFF PIPE THE COMEALONG MUST HAVE BEEN ACTING LIKE A GROUND BECAUSE IT WAS HOT AND BURNED EE LEFT HAND.
WE WAS PULLING A PULLEY WITH A COMEALONG WHEN EEPICK UP THE OTHER SIDE OF THE PULLEY WITH HIS HAND, AND THE PULLEY WENT IN REAL FAST AND CRUSH HIS FINGER. 3 SUTURES WERE NEEDED
EMPLOYEE WAS HIT IN HEAD BY CLEVIS/SHEAVE WHICH LOWERS A CABLE THAT SUSPENDS AN "L" SHAPED HOOK INTO TELSMITH JAW CRUSHER. HE WAS ATTEMPTING TO UNPLUG CRUSHER CLOGGED WITH OVERSIZE ROCK. CAB LE WHIPPED BACK AND FORTH AS CRUSHER WAS RUNNING AND HIT EMPLOYEE CAUSING HIM TO LOOSE HIS BALANCE. HE FELL FORWARD AND THEN WAS STRUCK BY SHEAVE.
REPLACINAG A CRUSHER PART, IN WEDAG CRUSHER. WHILE HITTING THE SHOE WITH A SLEDGE A PIECE OF THE CAST SHOE BROKE OFF & WENT INTO EE'S LEG.
WORKING ON CONVEYOR, CHANGING BELT. PULLED ON WRENCH, BOLT BROKE RESULTING IN INJURY.
EE WAS USING A UTILITY KNIFE TO CUT A CARDBOARD BOX. THE UTILITY KNIFE SLIPPED AND PUNCTURE EE WRIST. THE LACERATION REQUIRED 6 STITCHES.
EE WAS STANDING NEXT TO AN EE WHO WAS USING A PICK AX TO REMOVE FROZEN MATERIALS FROM WITHIN A HOPPER. EE WAS STRUCK IN THE FOOT BY THE PICK AX WHEN IT DEFLECTED FROM THE FROZEN MATERIAL. EE S USTAINED A BRUISE ON HIS LEFT FOOT. U
EE WAS TRIMMING INSULATION BACK ON WELDING LEAD CORD FOR REPAIR. WHILE CUTTING BACK THE INSULATION, THE KNIFE SLIPPED CUTTING EE LEFT INDEX FINGER. ACCIDENT REQUIRED TWO SUTURES.
EMPLOYEE WAS ATTEMPTING TO LOOSEN A ROTOR ON A CRUSHER BY USING A PRYBAR. AS HE PRIED ON THE BAR IT SLIPPED. THE SUDDEN SLIP CAUSED HIM TO SHIFT HIS WEIGHT HIS WEIGHT ON HIS LEG ULTIMATELY BRE AKING HIS ANKLE. WHEN HIS ANKLE BROKE HE LOST HIS BALANCE, FELL BACK ONTO THE CONVEYOR HE WAS STANDING ON AND THEN TO THE GROUND.
EE WAS USING A HAND-CRANK CABLE WINCH TO RAISE AN ANTI-SEGREGATION DEVICE ON A STACKING CONVEYOR THE HANDLE ON THE WINCH BROKE OFF AS EE WAS USING IT EE USED A PIPE WRENCH TO FINISH RAISING TH E ANTI-SEGREGATION DEVICE AS EE WAS CRANKING THEWINCH WITH THE PIPE WRENCH THE WINCH BROKE & THREW THE PIPE WRENCH INTO EE FACE
INJURED WAS WALKING ACROSS THE PARKING LOST AND TWISTED HIS RIGHT ANKLE.
EE WAS CUTTING RIDGID STYROFOAM INSULATION WITH A UTILITY KNIFE, WHEN THE BLADE WAS SHARPER THAT SHE THOUGHT IT TO BE, AND THE KNIFE SLIPPED AND CUT HER RT FOREFINGER REQUIRING SEVEN STITCHES.
EE WAS HELPING ERECT A PORTABLE PUGMILL. HE HAD TO EXTEND HIS BODY TO LOOSE AN ADJUSTING BOLT ON THIS MACHINE. WHEN HE PULLED DOWN ON THE WRENCH HE STAINED A MUSCLE IN HIS RIGHT SHOULER. THE C ONDITION ACT THAT CAUSED THE STRAIN WAS OVER EXTENSION OF HIS BODY.
INJURED WAS ADJUSTING CRUSHER CLUTCH HE WAS USING A HAMMER TO ADJUST THE CLUTCH. THE HAMMER CAME OFF FO THE HANDLE AND HIT HIM ON THE HEAD.
EE WAS CUTTING WEDGE SHAPED [PIECE OF BELT OFF AT SPLICE WITH UTILITY KNIFE KNIFE SLIPPED CUTTING INDEX FINGER ON LEFT HAND
EMPL WAS ATTEMPTING TO STRIKE A LATCH ON A RAILROAD CAR DOOR TO CLOSE IT WHEN THE BAR HE WAS USING RICOCHETED OFF THE CAR STRIKING HIS HEAD WHICH WAS PROTECTED BY SAFETY GLASSES & A HARD HAT. UNFORTUNATELY, THE BAR DROVE THE SAFETY GLASSES INTO HIS EYEBROW CAUSING A LCAERATION ABOVE HIS EYE WHICH REQUIRED TWO STICHES.
INJURED WAS HELPING ANOTHER EMPLOYEE CLEAN OUT THE AG LLINE CHUTE. WHEN THE OTHER EMPLOYEE DISLODGED THE FROZEN MATERIAL IT FELL DOWN THE CHUTE STRIKING TWO SHOVEL HANDLES & FELL OUT OF THE CH UTE & STRUCK INJURED ON THE LEFT ARM [FRACTURE] WHO WAS STANDING ON THE CATWALK.
EE WAS HITTING A PUNCH WITH A HAMMER, HE STRUCK THE PUNCH AND HIS HAND SLIPPED IN TURN. HE STRUCK HIS THUMB (LEFT THUMB) AND CUT IT OPEN-HE RECEIVED (11) STITCHES AND THUMB WAS PUT INTO SPLINT .
PRYING ROCK IN HOPPER
68935 HELPING ANOTHER EMPLOYEE WHO WAS CUTTING OFF A FRAID EDGE OF A CONVEYOR BELT-EE POINTED TO AN AREA THAT NEEDED TRIMMING GOT HIS HAND CUT IN THE PROCESS.
79895G ROCK FROM CHUTE WITH BAR.
HITTING WEDGE WITH HAMMER, VISE WEDGE AND HIT HIS KNEE.
THE MAN WAS GETTING READY TO SHOVEL OUT UNDER THE CONVEYOR.HE BENT OVER AND PUT THE SHOVEL INTO THE SPILLAGE AND AT THAT TIME HE FELT SOME PAIN IN THE LOWER BACK.
MAINTENANCE CREW WAS MOVING A NEW CONVEYOR WITH COME-ALONG INTO PLACE WHEN THEY SET IT DOWN TO REPOSITION THE CABLE I NAME STEPPED INTO A PINCH POINT HIS RT KNEE GOT PINCHED BETWEEN CONVEYOR & A GUARDRAIL
LIFTING ON END OF SANDSTACKER WITH JACK WITH WOOD BLOCKING ON BOTTOM AND STEEL BAR ON TOP OF JACK. THE STEEL BAR KICKED OUT STRIKING HIM ON RIGHT SIDE OF HEAD.
INJURED WAS USING SCREWDRIVER TO PRY DOOR HANDLE INTO PLACE; SCREWDRIVER SLIPPED HITTING LOWER LIP AND SHIN. SCREWDRIVER CUT CHIN AND LOWER LIP REQUIRING 4 TO 6 STICHES.
CUTTING A CARDBOARD BOX CONTAINING CROWN RUBBER. DIDN'T HAVE GOOD FOOTING AND LOST HIS BALANCE WHILE HOLDING THE UTILITY KNIFE.
WAS CLEANING RAIL CARS. TRIED TO STRAIGHTEN LADDER ON RAIL CAR WITH A PRY BAR, FELT PAIN IN HIS BACK WHILE PULLING ON PRY BAR.
I.NAME HELPING 9EPLACE BOLTS ON SHOVEL BUCKET.HE WAS INSIDE BUCKET HOLDING A BOLT WITH WRENCH-ANOTHER EMPL WAS ON OUTSIDE OF BUCKET TURNING TO LOOSEN BOLT,WRENCH SLIPPED OFF BOLT ALLOWING EMPL TO FALL BACK O3TO LEFT HIP.
EMPLOYEE WAS MAKING A HOLE IN 1\DYNAMITE WITH A BRASS ROD AND IT SLIPPED AND WENT INTO HIS THUMB.
WAS INSTRUCTED TO CUT A PIECE OF METAL END OFF THE HOPPER BUT INSTEAD EMP CUT ONE SIDE WHICH MADE AN L SHAPE AND DURING THE REMOVAL OF THE METAL IT TWISTED ON HIM CATCHING HIS FINGER BETWEEN THE METAL AND THE CONVEYOR