Buscar en el registro

Employee was attempting to get an ore bin to feed by poking the feed with a metal bar. EE accidently hit a support beam with EE's hand pinching EE's finger between the beam and the bar and causing a bruise.

Employee was stripping power cable to install a plug, the knife slipped and cut into the left-hand thumb causing it to cut to tendon

Employee was pulling on a wrench while working on the jumbo drill and felt something pull in left shoulder. The employee did not get medical treatment when it first happened. EE decided to make an appointment with a doctor for February 23, 2016 because the shoulder was not getting better. Employee is scheduled for 4-6 weeks of therapy.

Employee was standing on a 3 step stool using a 24'' pipe wrench loosening a 2'' pipe. As the pipe came loose the wrench slipped and he lost his balance having to step down off the stool quickly straining his right calf. Employee was seen at the emergency room and lost 3 days work. Returned to work 03/18/2011.

Accident 9/25/08, but didn't receive medical attention until 9/30/08. Employee was unplugging wet clay conveyor for Mill 1 with an iron bar. The clay loosened, causing his left hand to hit the side of the bin, leaving a contusion.

Employee stated that he was swinging a large hammer trying to free up material in dry ore silo. As he was swinging he said he felt pain in the lower back. He was seen at the emergency room. Employee lost one work day returning on 3-3-2008.

Employee was climbing a ladder and was at the top of the ladder when the hammer fell out of his pouch, striking another employee in the face / nose while he was at the bottom of the ladder. The employee broke his nose in 2 places.

EMPLOYEE WAS HELPING MILLWRIGHT TAKE UP NO.1 CRUSHER USING A 1-1/2' WRENCH TO LOOSEN 3" NUTS ON CRUSHER. EMPLOYEE TRIED TO LOOSEN THE NUT TWO TIMES WITHOUT MOVING NUT. ON THIRD TIME NUT RELEAS ED CAUSING LEFT THUMB TO BE PINCHED BETWEEN WRENCH AND 8" PIPE.

NO 4 HARDINGE DISCHARGE SCREW WAS PLUGGED. EE TRIED TO CLEAR PLUG BY TURNING SCREW CONVEYOR WITH 3' PIPE WRENCH. AS HE WAS TRYING TO TURN SCREW CONVEYOR WITH PIPE WRENCH HE FELT PAIN TO HIS LO WER BACK.

EE, OUR MECHANIC, WAS CHANGING THE OIL IN A VEHICLE WHEN A PIECE OF RUSTY METAL DROPPED IN EYE. EE WASHED EYE OUT AND CONTINUED WORKING. THIS WAS ON FRIDAY. THE WEEKEND CAME AND HIS RIGHT EYE BOTHERED HIM. MONDAY MORNING WE SENT HIM TO THE EYE DOCTOR.

AS EMPLOYEE TRIED TO REMOVE A 2" X 3" PIPE NIPPLE FROM A 90 DEGREE ELBOW WITH AN 18" PIPE WRENCHWITH A 2 FOOT EXTENSION PIPE, THE JAWS SLIPPED CAUSING EMPLOYEE TO LOOSE HIS BALANCE AND STEPPIN G DOWN ON RIGHT FOOT ROLLING HIS ANKLE CAUSING THE INJURY.

EE/INJ WAS SWINGING A SLEDGEHAMMER PUTTNGS PINS ON A PIECE OF HEAVY EQUIPMENT (DOZIER)

USING 12" PUNCH AND BALL PEEN HAMMER TO LINE UP NO. 4 SCREW CONVEYOR. STRUCK PUNCH WITH HAMMER, 1/4" PIECE OF STEEL CAME OFF END OF PUNCH AND PUNCTURED UPPER LEFT QUADRANT OF ABDOMEN.

EE WAS PULLING ORE OUT FROM UNDER 3 BELT TO CLEAN IT UP, HE FELT BACK PAIN IN MIDDLE OF BACK.

EMPLOYEE WAS WORKING ON #6 ELEVATOR HEAD PULLEY USING A LARGE BAR TO SLIDE HEAD PULLEY BACK TO CENTER POSITION. BAR SLIPPED CAUSING EMPLOYEE TO SLIP, TWISTING BACK SEVERAL TIMES.

EMPLOYEE WAS CUTTING ELV216 CONVEYOR BELT WITH AUTILITY KNIFE - CUTTING HIS LEFT FOREARM.

TWO EMPLOYEES WERE WORKING TOGETHER ON PUTTING A PIECE OF PANELLING UP IN AN OFFICE.THEY WERE CUTTING OUT THE WINDOW AREA.INJURED WAS HOLDING THE PANELLING ON ONE SIDE WHICH OTHER EMPLOYEE WAS CUTTING OUT THE WINDOW ON THE OTHER SIDE WITH AUTILITY KNIFE.EMPLOYEE CUT INJURED ON HIS LEFT PALM THROUGH THE PANELLING.

EE WAS KNOCKING A PIN WITH HAMMER IN THE TRACK OF FD-20 EQUIPMENT. CHIP FLEW OFF END AND FLEW IN TO RIGHT SIDE OF LEG.

EMPLOYEE WAS BARRING CHUNK OF ORE IN HOPPER & FELT PAIN IN GROIN DID NOT SEEK MEDICAL ATTENTION TILL SEPT 30 1994

EMPLOYEE WAS HELPING MOVE A JACKSHAFT WITH A BAR WHEN IT SLIPPED AND TRASNFERRED ALL WEIGHT TO HIM. IT CAUGHT HIS HANDS BETWEEN THE BAR AND CONCRETE FLOOR. THE RIGHT LITTLE FINGER WAS CUT (STI TCHES REQUIRED) THE RIGHT RING FINGER WAS CUT & THE LEFT THUMB WAS CUT.

55023RUCK A HOT BATTERY CABLE WITH A WRENCH WHICH CAUSED A SPARK TO ENTER AND BURN LEFT EYE.

EMPLOYEE WAS BARRING CHUNK OF ORE IN 700 LEVEL CRUSHER. BAR SLIPPED CAUSING STRAIN TO LOWER BACK.

LOOSEN STUCK ORE IN 700 LOADING POCKET REPETITIVE MOTION INJURY TO PALM ON LEFT HAND USING PRY BAR REPORTED TO SUPERVISOR 03-19-92

EMPLOYEE HIT A SPRAY CAN WITH A CLAW HAMMER & IT SPRAYED PAINT IN HIS EYES

CUT L THUMB WITH MACHETE

EMPLOYEE WAS LIFTING ON BAR TO MOVE RADIATOR COWL ON 966D FELT PAIN IN BACK AND GROIN DATE OF ACCIDENT 11-07-91.1ST VISIT TO DOCTOR 12-02-91.

WHILE USING HOOK TO MOVE CHUNK OF ORE IN CRUSHEREMPLOYEE FELT PAIN IN RIGHT SHOULDER.

EMPL WAS TRYING TO BAR SLAB IN CRUSHER BAR SLIPPED CAUSING STRAIN ON BACK & NECK.

INJURED WAS CHANGING CHAINS ON FEEDER WHEN THE PRY BAR SLIPPED, PINCHING MIDDLE FINGER OF LEFT HAND BETWEEN BAR AND FLOOR GRATING.

INJURED WAS PRYING UP ON A 25 HORSEPOWER MOTOR WITH A SCREWDRIVER TO TAKE OUT MOTOR SHIMS, WHEN THE SCREWDRIVER SLIPPED CAUSING MOTOR TO FALL ON RIGHT THUMB.

INJURED WAS BARRING A BRIDGED CHUNK OF ORE IN THE CRUSHER, WHEN HE PINCHED HIS LEFT HAND BETWEEN FEEDER PAN AND STEEL BAR.

INJURED WAS BARRING A CHUNK THROUGH THE CRUSHER AND FELT A SHARP PAIN IN HSI BACK, WHICH RADIATED UPWARD TOWARD HIS NECK.

INJ REMOVING NUT WITH WRENCH,IT SLIPPED OFF NUT INJ RIGHT ELBOW STRUCK THE BOLT.

INJURED CLAIMS HE WAS SWEEPING LABORATORY FLOOR WHEN HE FELT DISCOMFORT IN RIGHT EYE.GLASSES WERE WORN BY INJURED.

INJURED CLAIMS HE WAS SCALING DOWN LOOSE ROCK WHEN HE MISSED THE LOCATION HE WANTED TO PLACE THE BAR TO TAKE DOWN THE LOOSE ROCK; THE FORCE CAUSED INJURED TO SLIP.

CLEANING WET ORE OUT OF SURFACE CRUSHER WHEN HE FELT LOW BACK PAIN.

INJ CLAINS HE W5S SCRAPING AND CLEANING COMPRSSOR WHEN HE STRUCK HIS RT HAND ON COMPRESSOR, AND OPENED OLD CUT. INFECTION DEVELOPED AND HE WENT TO T HE COMPANY DOCTOR FOR TREATMENT OF INFECT

INJURED CLAIMS 2E WAS BARRING ON CHUNK BRIDGED IN THE CRUSHER WHEN HE FELT PAIN IN RIGHT SHOULDER.

EMPLOYEE WAS AT7EMPTING TO CLEAR FEED CLAY CHUTE WITH A STEEL ROD. IN THE PROCESS HE BRUISED HIS RIGHT HAND.

INJURED CLAIMS 6ARING ON A LARGE CHUNK BRIDGE IN T HE CRUSHER WHEN THE BAR CAUGHT BETWEEN THE CUSHER JAW & CHUNK CAUSING THE BAR TO STRIKE INJURED ON RIGHT SHOULDER & NECK.

INJURED CLAIMS 2E WAS BARRING OLD KNOT FROM CLEVIS WHEN HE FELT PAIN IN HIS LEFT SHOULDER

INJ BARRING ON 7HUNK OF ORE BRIDGED IN CRUSHER.CHUNK BECAME DISLODGED CAUSING PRY BAR TO STRIKE INJ ON LEFT SIDE OF HIS FOREHEAD.

PULLING ORE CHUTE-CAUGHT FLESHY PART OF FINGER BETWEEN CHUTE BAR & THE ORE IN THE ORE CAR

EMP WAS DISLODGING A LUMP OF CLAY STUCK IN DOOR OF SIDE DUMP CAR WITH PICK AX HE SPRAINED HIS BACK WHILE SWINGING AX IN AWKWARD POSITION

WITH I.NAME DRILLER EMPLOYEE WAS SCALING LOOSE ROCK FROM STOPE SIDEWALL THAT RESULTED FROM BLASTING ON PREVIOUS DAY IN SCALING ONE PARTICULAR PC OF LOOSE LOOSE MATERIAL FORCED THE SCALING BAR BACK IN TURN CATCHING I.NAME RT HAND LITTLE FINGER (THE FLESHY PART OF THE FIRST SEGMENT) BETWEEN END OF BAR& SOLID SIDEWALL GLOVES WERE BEING WORN

EMPLOYEE WAS USING A 2 SECTION OF PIPE TO GAIN MORE LEVERAGE WHILE TURNING A CRANK HANDLE ON A FEED CHUTE DOOR. PIPE SLIPPED OFF HANDLE STRIKING HIM IN RIGHT EYE CAUSING A LACERATION ON THIS E YE.

WHILE CUTTING CONVEYOR "LOK TAPE" WITH KNIFE HE SLIPPED OFF BOARD THAT TAPE WAS ON. CUTTING TWO FINGERS.

EE WAS SAWING A BOLT OF AN OLD SIGN ON PLANT ENTRANCE ROAD. BOLT SNAPPED OFF CAUSING SIGN TO FALL & CUT EES FINGER. 2 STITCHES REQUIRED.

2 MEN ASSIGNED TO SCALE ACCESS DRIFT TO 40 MANWAY OF EAST DRIFT 500 LEVEL.AS EMPL HELD SCALING BAR AGAINST PIECE OF LOOSE,OTHER EMPL PRYED ON THER END.CHUNCK BROKE LOOSE FORCING PIPE END OF BA R INTO EMPL RIGHT KNEE.

REPAIRING 3/4\\ WIRE CABLE.HAND S IPPED CATCHING PROTRUDING STRAND CAUSING PUNCTURE WOUND AND BONE CHIP MIDDLE FINGER RIGHT HAND.