Cada lesión y muerte que la MSHA tiene registrada. Filtra por estado, año, sector, clasificación, experiencia o cualquier palabra clave de la narrativa del investigador.
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
Employee was assisting in maintenance activities within the shop to loosen a housing on a water pump. The employees finger was struck by the hammer being used causing laceration and fracture to the left ring finger.
Employee was repairing welding gun. The welding gun was in left hand. The left hand was behind screw being removed. Force was applied to screwdriver to remove screw, when the tool slipped from the head of screw. The force being applied caused the tool to puncture left hand.
Miner was removing gear box with a pry bar. The pry bar slipped causing his finger to strike conveyor frame. Finger was cut causing him to receive stitches.
EE was cutting a feed belt with a utility knife, when it slipped and he cut his left hand between the thumb and index finger. Was seen at health unit, treated with 2 stitches and released to full duty.
Employye was using a utility knife to cut a piece of grease line off a bulk roll, the blade of the knife came out of the holder a cut the employees right thumb(employee is left handed) . The employee recieved three stitches in his right thumb and returned to duty.
Working on removal of equipment-spraybar and dropped spray bar on rt thumb and smashed it- x-ray negative but did drill hole and release blood.
Employee was attempting to cut screen with a utility knife and the knife slipped and cut employee on the upper thigh of the right leg.
The employee was in the process of removing a nut from a bolt. Wrench slipped cathing the right ring finger between wrench and equipment.
EE was assisting another employee in removing bucket from skid loader. Bucket pins were stuck. Lifted bucker approx 6" in air & struck handle with hammer. Lower pin released, bucket swung forward, came off upper bucker receptical & swung forward approx 12" - 16" landing on ee's right foot.
Individual was splicing 36" conveyor belt utilizing a belt knife, slipped with knife and cut right leg upper thigh with tip causing 1/4" laceration. Individual was cutting with knife in a direction towards body instead of away from body.
Employee was pulling on a bar that became stuck. As he pulled back on the bar, it came loose and he trapped his thumb in between 2 bars.
EMPLOYEE HURT HIS LEFT FOREARM WHILE HE WAS ALIGNING A CRUSHER FRAME, USING A PRY BAR TO SHIFT IT INTO PLACE TO ALIGN BOLT HOLES.
Employee was cutting a piece of rubber flashing with a utility knife. As he cut across he cut the palm of the hand holding the rubber flashing. Numerous stitches to close wound.
WHILE CUTTING A PIECE OF CONVEYOR BELT WITH RIGHT HAND, THE RAZOR KNIFE SLIPPED AND CUT EE'S LEFT INDEX FINGER.
EE WAS ATTEMPTING TO UNPLUG THE JAW CRUSHER USING A METAL PRY BAR. AS HE WAS PULLING ON THE BAR, HE FELT A STRAIN IN HIS LEFT SHOULDER.
HAMMERING A BLOCK IN PORTABLE IMPACT CRUSHER, THE BLOCK CHIPPED AND A CHIP LODGED IN HIS THROAT CAUSING A HOLE AND BLEEDING. AFTER X-RAY THE LOCATION WAS DETERMINED AND IT WAS REMOVED.
Employee was working on a tail pulley when the comealong that was being releases failed and pinched his thumb inbetween the bearing and take-up frame.
Ee was cleaning between impact rollers on feeder with a bar when his bar get caught between the roller and hopper above. his hand got caught between the bar and the roller cutting his hand betwen his thumb and forefinger.
Employee was cutting skirt rubber when the knife slipped and went through right finger.
WHILE STRIKING A BAR WITH A HAMMER MISSED STRIKING RIGHT INDEX FINGER.
EE WAS STANDING ON THE REAR PLATFORM OF THE WATER TRUCK TRYING TO LOOSE THE PUMP CAP WITH A WRENCH. WHILE PULLING ON THE WRENCH, THE WRENCH SLIPPED OFF THE CAP CAUSING THE EE TO LOOSE HIS BALA NCE AND FELL APPROX. 36" TO THE GROUND. THE EE FELL ON HIS LEFT SHOULDER AND WRIST, SUFFERING A FRACTURED LEFT WRIST.
EMPLOYEE WAS TIGHTENING BOLTS ON SCREEN BEARING HOUSING HOLDING A WRENCH WHILE ANOTHER EMPLOYEE WAS HITTING WRENCH WITH HAMMER. EMPLOYEE WITH HAMMER MISSED, HIT COUNTERWEIGHT & HAMMER BOUNCED ONTO INJURED EMPLOYEE'S RIGHT LITTLE FINGER, BRUISING IT. NO FRACTURE BUT REQUIRED SPLINT & RESTRICTED DUTY.
EE WAS DIRECTING WORK ON A CONVEYER BELT AND TOLD ANOTHER EE TO STRIKE THE TOP OF THE ARM OF A "SIDE KICK" WITH A HAMMER TO FREE IT UP. THE OTHER EE IMMEDIATELY STRUCK WITH THE HAMMER BUT HIT THE OTHER EE'S RIGHT RING FINGER, CAUSING A FRACTURE AT THE END OF THE FINGER.
WHILE HITTING A PLUGGED UP HOPPER WITH A #8 SLEDGE HAMMER, THE HAMMER BOUNCED BACK AND STRUCK EE IN THE FOREHEAD.
TWO MEN WERE LIFTING A SCREEN BEARING USING A BAR THROUGH A BOLTHOLE. UPON LIFTING, THE BAR SLIPPED OUT OF THE HAND CAUSING THE BEARING TO FALL ON HIS FOOT. THE IMPACT CAUSED A CONTUSION OF TH E RIGHT FOOT. X-RAYS SHOWED NO FRACTURES.
THE EE WAS CUTTING A 36" WIDE 3 PLY BELT WITH A UTILITY KNIFE. HE WAS HOLDING THE KNIFE IN HIS RIGHT HAND AND CUTTING TOWARDS HIM SELF. THE KNIFE SLIPPED AND HE CUT HIS LEFT HAND.
WHILE PULLING ON A COMEALONG THE CHAIN BROKE CAUSING THE HANDLE TO RELEASE. HIS HAND JERKED BACK AND HE STRUCK HIS ELBOW ON THE FRAMEWORK BEHIND HIM.
WHILE SPLICING CONVEYOR BELT SLIPPED WITH UTILITY KNIFE AND JABBED WRIST.
EMPLOYEE WAS USING A LONG STEEL BAR TO ROCK A 8 BY 20 VIBRATING SCREEN. THE BAR WAS CAUGHT BETWEEN THE SCREEN AND FRAME AND HIT HIM ON THE RIGHT EAR.
DRIVING IN WEDGE BOLT, EE MISSED WEDGE BOLT & HIT A WRENCH ON THE FLOOR. THE WRENCH POPPED UP & STRUCK EE IN THE MOUTH. EE NEEDED 3 STITCHES.
EE WAS CLEANING OUT PRIMARY CRUSHING PLANT. STONES SLID & STRUCK HIS RIGHT KNEE.
INSTALLING HYDRAULIC LINE ON 420-D BACKHOE AND WRENCH SLIPPED STRIKING PATIENT UNDER LEFT EYE. DAMAGE WAS 3 STITCHES, PATIENT RETURNED TO WORK IMMEDIATELY.
ADJUSTING TAKE UP BEARING STRAIN BACK.
FEED DOOR AT PLANT WAS CHOKED AND EE HAD TO DIG IT OUT WITH 6' DIGGING BAR AND STRAINED SHOULDER.
PUTTING BOLT PLATE ON SECOND DECK OF WASH SCREEN-WHILE TIGHTENING UP BOLT, WRENCH SLIPPED OFF & HIT HAND.
EE WAS TRYING TO KNOCK THE BOWL LINER FROM THE CONE WHEN HE STRUCK HIS SMALL LEFT FINGER WITH A HAMMER FRACTURING THE FINGER TIP.
EE WAS WORKING TO UNHOOK CHAIN AND OVER-EXTENDED HIMSELF STRAINING HIS LEFT SIDE.
EMPLOYEE ALLEGES WHILE WORKING ON A CHUTE A HAMMER SLIPPED OUT OF HIS HAND AND STRUCK HIM IN THE LEFT LEG IN THE SHIN AREA.
EMPLOYEE WAS CUTTING THE TOP OF A PLASTIC BOTTLE WITH A BELT. PULLING THE KNIFE TOWARDS HIMSELF. HE SLIPPED AND STABBED HIS LEFT FOREARM.
USING A PUNCH & HAMMER TO REMOVE WEDGE FROM CABLE WINCH. HE MISSED THE PUNCH AND HAMMER HIT MIDDLE FINGER, LEFT HAND. OPEN FRACTURES OF LEFT MIDDLE FINGER.
CRUSHER WAS PLUGING USED A CLEANOUT BAR TO KNOCK MATERIAL LOOSE IN USING A HAMMERING MOTION HE STRUCK HIS RIGHT HAND LITTLE FINGER AGAINST THE GUARD.
EE WAS SHOVELING SNOW OFF CONVEYOR BELT. HIS HAND HIT A METAL FRAME AS HE WAS PERFORMING HIS JOB DUTY.
PULLING BELT WITH 1 1/2 TON COMEALONG WHEN D-RING COMEALONG WAS ATTACHED TO TO BROKE FROM STEEL WALL STRIKING HIM ON HIS RIGHT FOREARM.
DURING A ROUTINE SCREEN CHANGE EE BEGAN HAMMERING A PIN WHEN HE SUDDENLY FELT A PAIN IN HIS RIGHT FOREARM.
PRYING ROCK OUT OF HOPPER, BAR SLIPPED OFF ROCK TWISTING RT. WRIST.
EE WAS CUTTING CONVEYOR BELT, SLIPPED AND CUT HAND.
DRAIN PLUG WAS TIGHT. EE WENT TO GET A WRENCH, USED A "CHEATER PIPE" INSTEAD. APPLIED PRESSURE AND SLIPPED. EE LACERATED HAND ON THE JAGGED EDGE OF THE PIPE. RECEIVED 6 SUTURES TO LEFT HAND (O N PALM.
EMPLOYEE WAS CUTTING PASTIC TIE FROM AN EXTEN- SION CORD USING A POCKET KNIFE; HE CUT THROUGH TIE AND LACERATED LEFT PALM.
WAS HOLDING A WRENCH IN A LOCATION TO TIGHTEN A BOLT WRENCH SLIPPED PINCHING RIGHT THUMB FRACTURING RIGHT THUMB UNDER NAIL.