Buscar en el registro

EMPLOYEE WAS USING UTILITY KNIFE TO CUT BELTING WHEN THE KNIFE SLIPPED AND CUT HIS FINGER. HE SUSTAINED 9 STITCHES IN FINGER.

EE WAS WELDING W/ARCH WELDER HE STOPPED WELDING, RAISED HOOD AND BEGAN PRYING ON PLAT S/PRY BAR. THE PRY BAR SLIPPED, STRIKING EE IN EYE. SAFETY GLASSES WERE PROVIDED TO EE PRIOR TO ACCIDENT.

EE WAS REMOVING JAW DIE WEDGE WHEN THE PORTA-POWER CYLINDER SLIPPED AND MASHED HIS RIGHT INDEX FINGER.

WHILE CLEANING OUT CHUTE ON PRIMARY CRUSHER (PRYBAR USED TO DISLODGE ROCK), A ROCK DISLODGED ANDEMPLOYEE'S MIDDLE FINGER ON RIGHT HAND MASHED BETWEEN PRY BAR & CHUTE, REQUIRING 3-4 STITCHES.

CUTTING CONVEYOR BELT (MASONERY MACHINE) WITH UTILITY KNIFE. BELT SLIPPED CAUSING KNIFE TO SLIDE & CUT EE. CUT RT. INNER THIGH WHICH HAD TO HAVE 3 STAPLES.

EE WAS CLEANING RAILCARS AND HIT HIMSELF IN THE KNEE WITH A SLEDGE HAMMER.

CLEANING RAILCARS, PRYBAR SLIPPED AND HIT HIM IN HEAD.

WHILE LOOSENING PINION GEAR ON 980 LOADER IT CAME LOOSE FALLING ABOUT 2 FEET AGAINST EMPLOYEE'S LEG. IT CUT A 3 INCH GAP INTO HIS RIGHT CALVE.

EE AND 3 EE WERE REMOVING A TELEDYNE HAMMER PIN. EE WAS DRIVING THE PIN WITH A 10 LB. HAMMERON ONE END THE OTHER EE WERE PULLING THE PIN WITH A PRY BAR. THE PIN WAS REMOVED WITHOUT EE KNOLEDGE . HE SUNG THE HAMMER AND INJURED HIS FINGER WHENNO RESISTENCE WAS ENCOUNTERED.

WHILE TIGHTENING A HYDRAULIC LIJNE THE WRENCH EE WAS USING SLIPPED CAUSING HIM TO HIT HIS HAND AND WRIST. EE WAS DRIVING TO SEE DR AND RELEASED TO FULL DUTY ON 7-1-98.

HE WAS USING A DIGGING BAR TO CLEAN MATERIAL FROM THE CATWALK AT THE IMPACT CRUSHER WHEN HE PINCHED HIS THUMB BETWEEN THE DIGGING BAR AND HANDRAIL AROUND THE CATWALK. THE THUMB CUT REQUIRED FO UR STITCHES.

CUTTING HOSE-SLIPPED (LACERATION OF FINGER)

EE SAID HE WAS CUTTING A SKIRT RUBBER OUT OF A PIECE OF CONVEYOR BELT. HE WAS CUTTING BELT, PULLING KNIFE TOWARD HIM, WHEN KNIFE SLIPPED.

WAS BEATING HAMMERS LOSE, PIECE OF METAL FLEW OFF HAMMER, HIT EE BACK OF RT LEG (THIGH).

EE WAS CUTTING FLASHING (RUBBER BELTING) WITH A RAZOR. HIS HAND SLIPPED CAUSING RAZOR TO LACERATE LEFT INDEX FINGER. SUTURES REQUIRED.

STRUCKBY METAL SHAFT WHILE WORKING ON A BEARING.TAKING BEARING OFF OF HEAD PULLEY SHAFT USING 6LB SLEDGEHAMMER. EE HOLDING SHAFT WHIL OTHER EE WAS HITTING SHAFT TO BREAK BEARING LOOSE, SHE N SPRING LOADED BLOCK FOR DIRT HAWG LAYIN ON SERVICE TRUCK FELL OVER AND STRUCK EE'S HAND.

WHILE SHOVEL OEPERATOR WAS REPLACING TEETH ON SHOVEL. ONE TOOTH WAS TOO TIGHT. SHSVOEL OEPRATOR TOOK SLEDGE HAMMER TO TRY AND LOOSEN IT. PART OF THE TOOTH CHIPPED OFF AND BECAME EMBEDDED IN SHOVEL OEPRATOR IS UPPER LEFT LEG.

CUTTING RUBBER CONVEYOR BELT WITH KNIFE, CUT R HAND - 10 STITCHES.

ACCIDENT OCCURRED WHEN INJURED WAS CAHNGING THE LACING ON THE BELTS FOR THE CRUSHER.WHILE PRYING ON OLD LACING,THE LACING GAVE WAY FLIPPING HIM IN THE EYE.THIS COULD HAVE BEEN PREVENTED IF HE HAD BEEN WEARING HIS SAFETY GLASSES PROVIDED.NO DAMAGE TO THE EQUIPMENT RESULTED FROM THE ACCIDENT.

HIT TOP RIGHT SIDE OF LIP REQUIRING 6 STITCHES. SHAKING ROCK OFF BOTTOM OF CONVEYOR BELT WITH SHOVEL, SHOVEL CAME BACK AND HIT ME ON LIP (METAL PART).

ADJUSTING BELT ON TAKEUPS WITH 1 1/2" HAND WRENCH, WRENCH SLIPPED AND SMASHED FINGER ON AN ANGLE IRON - BROKE BONE UNDER LEFT HAND RING FINGER UNDER NAIL - LOST NAIL, SMASHED AND CUT FINGER.

CUTTING RUBBER BELT WHEN THE KNIFE SLIPPED CUTTING MY THUMB.

CUTTING BELTING WITH A SHARP KNIFE. THE KNIFE SLIPPED, CUTTING HIS RIGHT INDEX FINGER REQUIRING 7 STITCHES.

WORKING IN A TIGHT SPOT TO SLICE A BELT IN THE BLENDING BIN FEEDER. I HAD ONE FOOT ON PARRY BLOCK AND ONE A MOTOR WHEN I SLIPPED, FELL AND HIT ARM AND BACK.

USING 20# BAR TO HELP CLEAR BLINDED SCREENCLOTH,GLOVED LEFT HAND HIT SCREEN FRAME CUTTING LEFT LITTLE FINGER PULLING NAIL LOOSE.

CLEARING FROZEN MATERIAL IN FEEDBOX WITH BAR THROUGH A HOLE CUT FOR THAT PURPOSE WHEN MATERIAL MOVED CAUSING BAR TO STRIKE FOREHEAD. LACERATION 1 & HALF INCHES REQUIRING STITCHES.

INJURED WAS SERVICING A BROKEN BELT ON THE CRUSHER WHEN HE CAUGHT A SHARP PIECE OF METAL CUTTING HIS RIGHT THIGH.THERE WAS NOT DAMAGE TO ANY EQUIPMENT AND NO RULES OF COMPLIANCE WERE BROKEN AT THIS TIME.JOB SKILLS AND TRAINING WERE PROPERLYUSED THIS COULD HAVE BEEN AVOIDED WITH COMMON SENSE WATCHING EVERYTHING SURROUNDING HIM.

EMPLOYEE WAS TAKING AN ELBOW OFF OF A WATER VALVE BY USING A HAMMER.HE STRUCK HIS LEFT RING FINGER WITH THE HAMMER.HE SPLIT THE END OF HIS LEFT RING FINGER AND CRUSHED THE END OF THE BONE.

HE WAS HOLDING SHAFT FROM WHICH THEY WERE TAKING A BEARING OFF. I.NAME HIT BEARING RACE AND A CHIP FLEW OFF AND HIT HIM IN LEFT INDEX FINGER, CUTTING IT. SUTURES REQUIRED.

TIGHHTENING BOLTS ON CEDAR RAPIDS SCREEN WHEN THE WRENCH SLIPPED OFF THE NUT. MIDDLE FINGER OF RIGHT HAND JAMMED INTO AN ANGLE IRON BRACE.

REPLACING SNUB PULLER ON SAND CONVEYOR,PULLING ON WRENCH WHEN FELT PAIN IN RIGHT WRIST.

WORKING INSIDE 2 SCREEN PUTTING SCREWS ON.STEEL IN LEFT EYE.

HOOKON A COMEALONG SLIPPED OFF CHAIN AND STRUCK FOREHEAD CAUSING SMALL CUT ABOVE RIGHT EYE REQUIRING THREE STITCHES.