Buscar en el registro

He was removing a water valve from a pipe and bumped his head on pipe. He received a cut to scalp in back of head. Received staples and tetanus shot.

Employee had brought a deer skull to work and was cutting off the hide and the knife slipped and cut his hand - required stitches.

Hammering on a punch, a piece broke off and punctured left arm.

HAMMERING A PIN OUT OF A LOADER WHEN A PIECE OF THE PIN CHIPPED OFF AND LANDED IN LEFT ARM, REQUIRING STITCHES.

CUTTING A PIECE OF CONVEYOR BELT - KNIFE SLIPPED OFF BELT AND CUT HIS HAND.

DOING MAINTENANCE WORK ON MOTOR BASE - SLIPPED OFF MOTOR BASE & SPRAINED WRIST.

GETTING MATERIAL FROM BIN. HIT SIDE OF BIN WITH A SLEDGE HAMMER, HANDLE CAUGHT ON AN AIR LINE CAUSING LEFT HAND TO SLIDE OFF THE HANDLE AND SLAM FINGER INTO AIR LINE.

EE WAS PULLING ON A COMEALONG WHEN A PAIN WAS FELT IN LOWER ABDOMEN.

INJURED WAS USING PRY BAR IN THE CRUSHING MILL, BAR SLIPPED AND PINCHED FINGER BETWEEN PRY BAR AND HOPPER.

EE WAS WORKING ON HOPPER PLATE AT CRUSHER. HE LIGHTLY STRUCK HAMMER BIT WITH SLEDGE HAMMER. A SMALL PIECE OF THE HAMMER BIT BROKE OFF AND FLEW INTO LEG. DR. TRIED TO REMOVE STEEL AT HIS OFC., THEN SENT EE TO HOSPITAL TO HAVE IT REMOVED.

INJURED WAS PUTTING CHAIN TOGETHER ON SAND DRAG, DRIVING PIN INTO CHAIN WITH SLEDGE HAMMER. MISSED THE PIN AND STRUCK END OF FINGER- NO SUTURES REQUIRED.

INJURED WAS WORKING WITH CRESCENT WRENCH ON A NUT TRYING TO GET PULLEY OFF (CHANGING OIL SEAL ON SCREEN IN MILL). IT WAS HARD TO REMOVE, WRENCH SLIPPED, CAUGHT FINGER BETWEEN PULLEY AND WRENC H.

INJURED WAS CHANGING BLOW BARS ON IMPACT CRUSHER, USING A 10 LB SLEDGE HAMMER TO LOOSEN BARS IN MILL. WHEN HE STRUCK BAR, A CHIP FLEW OFF SLEDGE HAMMER HEAD AND STRUCK INJURED.

INJURED WAS USING CHIPPING HAMMER TO REMOVE FLUX OFF OF PIECE HE WAS WELDING. HE LIFTED WELDING HELMET WHEN CHIPPING LFUX, BUT PIECE OF FLUX ENTERED RIGHT EYE FROM BOTTOM SIDE OF GLASSES.

INJURED WAS WELDING ON NEW CHUTES, WEARING HELMET & SAFETY GLASSES, HE RAISED HELMET TO SEE TO CHIP OFF FLUX. WHEN CHIPPING A PIECE OF FLUX GOT BEHIND GLASSES AND ENTERED EYE.

INJURED WAS PUTTING NEW BOLTS IN DRIER FLIGHTS. INJURED WAS CHIPPING SCALE OFF OF OLD BOLTS. PIECE OF SCALE GOT UNDER GLASSES IN LEFT EYE.

REPLACING WEDGES BEHIND HAMMER IN MILL, USING DRIVING BAR AND SLEDGE HAMER ON WEDGES THE DRIVING BAR SLIPPED AND INJ HIT FINGER

INJ POUNDING ON WATERLINE PIPE WITH HAMMER TO GET PIPE LOOSE SO IT COULD BE REPLACED.A CHIP OR SLIVER OF STEEL FLEW INTO RIGHT EYE.

IN PREPARATION FOR WELDING INJUREKD WAS CHIPPING SLAG OFF PIECE OF STEEL WITH HAMMER & CHISEL PIECE OF STEEL FROM HAMMER CHISEL OR WORK PIECE FLEW OFF STRIKING LEFT THUMB

INJURED WAS LAYING UNDER CAT TRUCK TAKING OFF DRIVE SHAFT. WHILE TAKING BOLTS OUT, UNIVERSAL JOINT CAME APART AND LET DRIVE SHAFT FALL, STRIKING INJURED ON HEAD.

INJURED WAS PRY3NG ON ROCK WITH CROWBAR TO FEED CRUSHER TO FEED CRUSHER AND RUPTURED OR TORE SOME INTESTINES.

INJURED WAS MOVING A ROCK SO IT WOULDN\T JAM IN CRUSHER, AND A STONE CAME UP FROM CRUSHER AND HIT INJURED IN EYE. INJURED WAS USING PRY BAR.

USED WEDGE TO BREAK ROCK THAT WOULDN\T GO THROUGH CRUSHER. WEDGE GOT UNDER ROCK & HAD TO HOLD ON TO WEDGE SO THAT IT WOULDN\T GO THROUGH THE CRUSHING SYSTEM.