Buscar en el registro

He was cutting a piece of truss of stacking conveyor when final cut was made conveyor broke loose & moved. EE was standing on 3rd rung of ladder conveyor did not contact ee or ladder but he jumped off ladder & fell to ground landing on left arm.

Using cutting torch to remove snubber pulley from conveyor frame. When removing, snubber fell and pinched left thumb. He was taken to hospital and surgery done.

He was removing a water valve from a pipe and bumped his head on pipe. He received a cut to scalp in back of head. Received staples and tetanus shot.

While pulling a lid into place, finger was pinched between lid and steel beam.

Using cut off wheel on grinder cutting piece of steel.

Man was standing on step ladder welding. He stepped off side of ladder and fell hurting his foot.

Employee had brought a deer skull to work and was cutting off the hide and the knife slipped and cut his hand - required stitches.

EE believed airlock was plugged. He did not de-energize machine. Did not use lock out procudure. EE remved a plate from the chute and stuck his hand into the discharge chute. His hand contracted the energized airlock and finger (3) were cut off.

EE was sliding skirt board plates into hopper. He twisted as he attempted to push the skirt board to a co-worker on other side of opening.

Hammering on a punch, a piece broke off and punctured left arm.

Climbing down ladder on Cat 771D (Eqp #313), slipped and banged up knee on the steel ladder.

After working on a shot, arms and legs went numb; took a break, heat exhaustion. **New diagnosis of Mono**

When greasing loader, EE caught his left foot in the bucket brace.

EE MISSED STEP WHEN EXITING YARD TRUCK. HIS LEFT FOOT LANDED ON A SMALL PIECE OF CONCRETE WITH ALL HIS WEIGHT. BROKE HIS FOOT.

Lifting a bearing housing when he strained his neck.

WHILE EXITING SKID LOADER, SLIPPED ON ICE AND FELL, HIT HEAD ON GROUND. WAS REMOVING SNOW ON ROAD COMING INTO THE QUARRY.

GRINDING ON THE EDGE OF STEEL SHEET - GRINDER WHEEL CAUGHT ON A STEEL CLAMP - KICKED BACK STRIKING LEFT KNEE - PRODUCED A CUT THAT REQUIRED STITCHES.

PULLING ON A HANDLE TO TIGHTEN THE CRUSHER. SLIPPED AND FELL ON CAT WALK. WENT TO HOSPITAL E.R FOR A SHOULDER SPLIT/ HARNESS AND A POSSIBLE ROTATOR CUP TEAR.

EMPLOYEE WAS REPAIRING THE CONVEYOR BASE. WHILE LIFTING/MOVING AN 8' LONG I-BEAM HE STRAINED HIS SHOULDER & WRIST. HE MISSED ONE DAY OF WORK & HAS ARM IN A SLING.

HAMMERING A PIN OUT OF A LOADER WHEN A PIECE OF THE PIN CHIPPED OFF AND LANDED IN LEFT ARM, REQUIRING STITCHES.

EMPLOYEE WAS CLEANING MUD FROM LOADER BUCKET, WHEN A CHUNK OF MUD ROLLED OUT OF BUCKET AND HIT HIS LEFT KNEE. POSSIBLE STRAIN OR FRACTURE.

WHILE BREAKING INTO FROZEN STONE PILE, SUFFERED NECK PAIN, WHEN HE JERKED BACK & FORWARD. SAID HE FELT SOMETHING SNAP IN NECK.

STUMBLED OVER WELDING CABLE & HIT ELBOW ON EDGE OF CHUTE. WENT TO DOCTOR 2/18 AND GIVEN PILLS ONLY. WENT TO DOCTOR 2/25 AND ELBOW WAS LANCED TO DRAIN OFF FLUID.

EE WAS DOING ROUTINE MAINTENANCE IN THE MILL. WHILE CARRYING A HEATER UP THE STAIRS HE FELT AN INCREASE PAIN IN HIS RIGHT SHOULDER, WHICH HE HAD SORENESS ALREADY FROM LIFTING STEEL TO REPAIR A CONVEYOR 2-3 WEEKS EARLIER.

WELDING AND TIP OF WELDING ROD BURNED THRU GLOVE AND INTO FINGER.

OPERATING AIR HAMMER TO BREAK LOOSE LIME DEPOSIT ON MILL CHUTE - WRIST HAS HURT SINCE.

CUTTING A PIECE OF CONVEYOR BELT - KNIFE SLIPPED OFF BELT AND CUT HIS HAND.

OPENING HATCHES ON RAILCAR, HE STEPPED ACROSS OPENING & TRIPPED, CATCHING HIMSELF WITH HIS LEFT ARM CAUSING A STRAIN TO HIS ARM.

DOING MAINTENANCE WORK ON MOTOR BASE - SLIPPED OFF MOTOR BASE & SPRAINED WRIST.

WHILE INSTALLING TAIL PULLEY, THE PULLEY SLID SIDEWAYS ON OPPSITE SIDE. HE REACHED TO STOP PULLEY AND IT SLID OFF OF HIS SIDE CAUSING IT TO SMASH HIS FINGER BETWEENT HE PULLEY AND FRAME OF THE CONVEYOR HE REQUIRED STITCHES.

WORKING AROUND CONVEYOR - TRIPPED & FELL - WHEN GETTING UP ROCK FELL FROM CONVEYOR STRIKING FOREHEAD.

SLIPPED AND FELL ON ICE, HIT HHER HEAD.

GETTING MATERIAL FROM BIN. HIT SIDE OF BIN WITH A SLEDGE HAMMER, HANDLE CAUGHT ON AN AIR LINE CAUSING LEFT HAND TO SLIDE OFF THE HANDLE AND SLAM FINGER INTO AIR LINE.

STEPING OUT OF 966 CAT LOADER-MISSED STEP A FELL TO GROUND-ONE FOOT COT HUNG UP IN STEP. INJURY TO GROIN AREA-BRUISNG AND ABRASHIONS.

TAKING DOWN OVERHEAD HOIST-IT SWUNG STRIKING EAR.

CUTTIN STEEL ON BAND SAW--WHEN FEEDING STEEL A BAR OF STEEL WAS DROPPED ON FINGER.

EE WAS HELPING TAKE OFF A TIRE ON THE QUARRY TRUCK. WHILE MOVING UNDER A BOOM ON A LOADER, HE BUMPED HIS HEAD OF CLEVIS

LARGE QUARRY TRUCK WAS BE BACKED TO EDGE OF SURGE PILE TO DUMP STONE THAT FEEDS A CRUSHER. TRUCK WENT OVER EDGE, FLIPPED UPSIDE DOWN ANFD SLID DOWN A SLOPE, ON A PILE STONE, ABOUT 50'. DRIVER RECEIVE CUTS & BRUISES.

CLEANING THE SURGE TUNNEL. SHOVELING FINE CRUSHED STONE ONTO SURGE BETL. STRAIND BACK.

EMPLOYEE WAS ALIGNING A CONVEOR BELT WHEN HIS ARM GOT CAUGHT BETWEEN THE ROLLER AND FRAME OF THE CONVEYOR. HIS ARM WAS BROKEN AND HAD SERIOUS CUTS.

CLEANING OUT A HOPPER JUMPED FROM PLATFORM TO THE GROUND LEFT HEEL LANDED ON A ROCK FRACTURED HEEL.

EE WAS PULLING ON A COMEALONG WHEN A PAIN WAS FELT IN LOWER ABDOMEN.

INJURED WAS WALKING TO CONTROL ROOM OF FINE GRIND PLANT AND SLIPPED ON AN ICY SURFACE CAUSING HIM TO FALL AND HIT THE BACK OF HIS HEAD ONT HE GROUND CUTTING IT OPEN.

INJURED WAS CLIMBING DOWN FROM CAT LOADER, [ON ARAINY DAY], SLIPPED ON STEP & STRUCK RIGHT LEG ON STEP CUTTING SAME, REQUIRING SUTURES.

INJURED WAS DRIVING BACKHOE BY STEEL PILE WHEN AN UNKNOWN OBJECT HIT HIM IN THE LEFT EYE.

INJURED WAS ROLLING UP SCREEN CLOTH USING WIRE TO FASTEN SAMR.WIRE BROKE AND SCREEN CLOTH FLIPPED,STRIKING INJURED ON CHIN AND FACE.

INJURED WAS GRINDING A PIECE OF METAL ON GRINDING WHEEL. A SMALL PIECE OF THE GRINDING WHEEL FLEW OFF AND INTO LEFT EYE.

EE WAS HELPING UNLOAD STARTER FOR THE MILL FROM CHEVROLET TAHOE VEHICLE AND TWISTED BACK.

INJURED WAS CLIMBING UP ONTO CAT DUMP TRUCK, HIS FOOT SLIPPED, CAUGHT HIMSELF WITH HAND, BUT TWISTED BACK.

INJURED WAS USING PRY BAR IN THE CRUSHING MILL, BAR SLIPPED AND PINCHED FINGER BETWEEN PRY BAR AND HOPPER.