EE was cutting a zip tie with a utility knife and cut EE's hand resulting in receiving stitches. Returned to work same day.
US Aggregates-Portland Quarry: 193 citaciones de la MSHA Metal/Non-Metal
US Aggregates-Portland Quarry tiene $60K en multas propuestas de MSHA y $0 pendientes en 2 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en US Aggregates-Portland Quarry.
- Muertes
- 0
- Incidentes totales
- 69
- Años en registro
- 1984–2026
- Último incidente
- Feb 2026
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.US Aggregates-Portland Quarry tiene $60K en multas propuestas de MSHA y $0 pendientes en 2 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.ⓘ
Las proporciones se calculan sobre las citaciones que llevan la codificación de gravedad y negligencia de la MSHA; una pequeña parte de los registros no está codificada.ⓘ
Impugnar una citación ante la Comisión Federal de Revisión de Seguridad y Salud Minera es un derecho legal. Estas cifras presentan los resultados públicos de ese proceso, según el archivo de Violaciones Impugnadas de MSHA.- Conciliadas 4 · 100%
ⓘ
Una citación Significativa y Sustancial cuenta como sobreviviente cuando la conciliación o la decisión del juez mantuvo la designación, o cuando la impugnación fue desestimada o quedó en rebeldía y la citación quedó como emitida. Las citaciones anuladas o retiradas, y las conciliaciones que quitaron la designación, cuentan en contra.ⓘ
Una reducción o desestimación ante la Comisión es un resultado legítimo de impugnar una multa propuesta. Las cifras son el monto propuesto y el monto confirmado en la decisión del expediente.| Expediente | Decisión | Juez | Año | Propuesta / confirmada |
|---|---|---|---|---|
| LAKE 2011-282M | Settlement | Lewis | 2011 | $600 → $600 |
| LAKE 2011-74M | Settlement | Lesnick | 2011 | $451 → $308 |
ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.Contaminantes en minas de metal y no metal (muestras personales)
ⓘ
Muchas muestras son mediciones de detección de sustancias sin límite de exposición aplicable; se cuentan como muestras pero se excluyen de toda cifra de exceso. Los porcentajes de exceso usan solo muestras con límite establecido.
Última medición: 2025-04-09
ⓘ
Muchas muestras son mediciones de detección de sustancias sin límite de exposición aplicable; se cuentan como muestras pero se excluyen de toda cifra de exceso. Los porcentajes de exceso usan solo muestras con límite establecido.- Nuisance dust, total, <1% Qtz82 en exceso
- Nuisance dust, respirable, <1% Qtz7
- Quartz, respirable, >1% Qtz3
- Respirable dust, <.1mg2
Ver los análisis individuales (22)
| Fecha | Contaminante | Concentración | Límite | Conc / límite | Ocupación |
|---|---|---|---|---|---|
| 2007-03-21 | Nuisance dust, total, <1% Qtz | 15.62 | 10 | 1.56 | Truck Loader |
| 2003-02-04 | Nuisance dust, total, <1% Qtz | 13.71 | 10 | 1.37 | Truck Loader |
| 2025-04-09 | Quartz, respirable, >1% Qtz | 0.87 | 2.94 | 0.30 | Dry Screen Plant Operator |
| 2021-11-23 | Unlisted Particulate, respirable, <1% Qtz | 2.64 | Dry Screen Plant Operator | ||
| 2021-11-23 | Respirable dust, <.1mg | 0 | Crusher Oper/Worker | ||
| 2021-11-23 | Unlisted Particulate, respirable, <1% Qtz | 0.49 | Kiln/Dryer Operator | ||
| 2018-08-22 | Nuisance dust, total, <1% Qtz | 0.32 | 10 | 0.03 | Front-end Loader Operator |
| 2018-08-22 | Nuisance dust, total, <1% Qtz | 5.77 | 10 | 0.58 | Laborer, Bullgang |
| 2013-06-05 | Nuisance dust, respirable, <1% Qtz | 0.81 | 10 | 0.08 | Hand Loader |
| 2013-06-05 | Nuisance dust, respirable, <1% Qtz | 0.37 | 10 | 0.04 | Kiln/Dryer Operator |
| 2013-06-05 | Nuisance dust, respirable, <1% Qtz | 1.11 | 10 | 0.11 | Truck Loader |
| 2013-06-05 | Nuisance dust, respirable, <1% Qtz | 1.11 | 10 | 0.11 | Building Repair/Maint. |
| 2011-02-02 | Nuisance dust, respirable, <1% Qtz | 0.35 | 10 | 0.04 | Crusher Oper/Worker |
| 2011-02-02 | Quartz, respirable, >1% Qtz | 0.59 | 2.89 | 0.20 | Complete Load-Haul-Dump |
| 2007-05-09 | Nuisance dust, total, <1% Qtz | 5.41 | 10 | 0.54 | Truck Loader |
| 2005-01-20 | Nuisance dust, respirable, <1% Qtz | 0.44 | 10 | 0.04 | Hammer Mill Operator |
| 2005-01-20 | Nuisance dust, respirable, <1% Qtz | 0.23 | 10 | 0.02 | Truck Driver |
| 2005-01-20 | Respirable dust, <.1mg | 0 | Crusher Oper/Worker | ||
| 2003-06-17 | Nuisance dust, total, <1% Qtz | 5.81 | 10 | 0.58 | Truck Loader |
| 2003-02-04 | Nuisance dust, total, <1% Qtz | 3.37 | 10 | 0.34 | Kiln/Dryer Operator |
| 2003-02-04 | Nuisance dust, total, <1% Qtz | 8.61 | 10 | 0.86 | Dry Screen Plant Operator |
| 2003-02-04 | Quartz, respirable, >1% Qtz | 0.5 | 2.88 | 0.17 | Crusher Oper/Worker |
US Aggregates-Portland Quarry registró 4.18 casos de lesión reportables por cada 100 trabajadores a tiempo completo en 2025.
ⓘ
Esta tasa son los casos de lesión reportables por cada 100 trabajadores a tiempo completo por año, calculada como 200,000 por los casos dividido entre las horas-empleado reportadas por el operador a la MSHA. Los casos son lesiones que la MSHA clasificó en grado 01 a 07; se excluyen los eventos de solo accidente que no lesionaron a nadie, y también las lesiones de contratistas, cuyas horas no corresponden a una sola mina. Las tasas comienzan en el año 2000, cuando inicia el reporte trimestral de empleo, y se omiten por debajo de 20,000 horas en un año.| Año | tasa de casos totales | días perdidos | mortales |
|---|---|---|---|
| 2025 * | 4.18 | 0.00 | 0.000 |
| 2024 * | 4.76 | 0.00 | 0.000 |
| 2023 * | 0.00 | 0.00 | 0.000 |
| 2022 * | 4.43 | 0.00 | 0.000 |
| 2021 * | 8.40 | 4.20 | 0.000 |
| 2020 * | 4.32 | 0.00 | 0.000 |
| 2019 * | 4.96 | 0.00 | 0.000 |
| 2018 * | 0.00 | 0.00 | 0.000 |
- Meshberger Brothers Stone Corp 1950 a 2012
- Heritage Aggregates, LLC 2012 a 2020
- US Aggregates Inc 2020 a 2026
- US Aggregates LLC 2026 al presente
| Año | Empleados |
|---|---|
| 2026 | 19 |
| 2025 | 19 |
| 2024 | 16 |
| 2023 | 18 |
| 2022 | 19 |
| 2021 | 19 |
| 2020 | 19 |
| 2019 | 17 |
| 2018 | 16 |
| 2017 | 15 |
| 2016 | 16 |
| 2015 | 17 |
| 2014 | 19 |
| 2013 | 19 |
| 2012 | 21 |
| 2011 | 21 |
| 2010 | 21 |
| 2009 | 20 |
| 2008 | 21 |
| 2007 | 21 |
| 2006 | 21 |
| 2005 | 21 |
| 2004 | 22 |
| 2003 | 24 |
| 2002 | 25 |
| 2001 | 25 |
| 2000 | 25 |
US Aggregates-Portland Quarry se ubica en Jay County, Indiana, donde la categoría minera del Censo representa el 0.1% del empleo del condado.
ⓘ
Las cifras del condado provienen de la Encuesta sobre la Comunidad Estadounidense de la Oficina del Censo de EE. UU., estimaciones quinquenales agrupadas, por lo que la edición de 2023 abarca de 2019 a 2023. La categoría del Censo es 'minería, explotación de canteras y extracción de petróleo y gas', que es más amplia que la jurisdicción de la MSHA e incluye a trabajadores de petróleo y gas que ninguna mina emplea. Estas cifras describen el condado circundante, no esta mina, y no son un factor en ningún incidente específico.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2026 Q2 | 11,557 | 4 | 0 | 346.1 |
| 2026 Q1 | 7,834 | 5 | 0 | 638.2 |
| 2025 Q4 | 10,799 | 0 | 0 | 0.0 |
| 2025 Q3 | 12,972 | 0 | 0 | 0.0 |
| 2025 Q2 | 10,867 | 3 | 1 | 276.1 |
| 2025 Q1 | 13,231 | 0 | 0 | 0.0 |
| 2024 Q4 | 10,449 | 4 | 0 | 382.8 |
| 2024 Q3 | 11,796 | 7 | 1 | 593.4 |
Mostrar 98 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2024 Q2 | 10,133 | 0 | 0 | 0.0 |
| 2024 Q1 | 9,611 | 0 | 0 | 0.0 |
| 2023 Q4 | 9,878 | 2 | 0 | 202.5 |
| 2023 Q3 | 12,389 | 16 | 2 | 1291.5 |
| 2023 Q2 | 11,963 | 0 | 0 | 0.0 |
| 2023 Q1 | 11,307 | 22 | 7 | 1945.7 |
| 2022 Q4 | 10,863 | 0 | 0 | 0.0 |
| 2022 Q3 | 11,150 | 1 | 0 | 89.7 |
| 2022 Q2 | 11,086 | 6 | 4 | 541.2 |
| 2022 Q1 | 12,068 | 0 | 0 | 0.0 |
| 2021 Q4 | 11,116 | 13 | 11 | 1169.5 |
| 2021 Q3 | 12,473 | 0 | 0 | 0.0 |
| 2021 Q2 | 12,693 | 5 | 1 | 393.9 |
| 2021 Q1 | 11,340 | 0 | 0 | 0.0 |
| 2020 Q4 | 10,982 | 0 | 0 | 0.0 |
| 2020 Q3 | 12,472 | 0 | 0 | 0.0 |
| 2020 Q2 | 11,026 | 5 | 1 | 453.5 |
| 2020 Q1 | 11,797 | 0 | 0 | 0.0 |
| 2019 Q4 | 10,075 | 4 | 2 | 397.0 |
| 2019 Q3 | 10,720 | 4 | 0 | 373.1 |
| 2019 Q2 | 9,999 | 0 | 0 | 0.0 |
| 2019 Q1 | 9,505 | 0 | 0 | 0.0 |
| 2018 Q4 | 8,581 | 2 | 1 | 233.1 |
| 2018 Q3 | 9,352 | 2 | 1 | 213.9 |
| 2018 Q2 | 9,661 | 0 | 0 | 0.0 |
| 2018 Q1 | 9,656 | 0 | 0 | 0.0 |
| 2017 Q4 | 8,482 | 1 | 0 | 117.9 |
| 2017 Q3 | 6,397 | 0 | 0 | 0.0 |
| 2017 Q2 | 5,939 | 0 | 0 | 0.0 |
| 2017 Q1 | 4,655 | 0 | 0 | 0.0 |
| 2016 Q4 | 8,656 | 0 | 0 | 0.0 |
| 2016 Q3 | 9,475 | 0 | 0 | 0.0 |
| 2016 Q2 | 9,739 | 0 | 0 | 0.0 |
| 2016 Q1 | 7,657 | 0 | 0 | 0.0 |
| 2015 Q4 | 8,802 | 0 | 0 | 0.0 |
| 2015 Q3 | 9,896 | 0 | 0 | 0.0 |
| 2015 Q2 | 9,938 | 4 | 0 | 402.5 |
| 2015 Q1 | 10,231 | 1 | 0 | 97.7 |
| 2014 Q4 | 9,756 | 0 | 0 | 0.0 |
| 2014 Q3 | 10,066 | 0 | 0 | 0.0 |
| 2014 Q2 | 11,231 | 3 | 1 | 267.1 |
| 2014 Q1 | 11,332 | 0 | 0 | 0.0 |
| 2013 Q4 | 10,596 | 1 | 0 | 94.4 |
| 2013 Q3 | 10,869 | 0 | 0 | 0.0 |
| 2013 Q2 | 11,430 | 1 | 0 | 87.5 |
| 2013 Q1 | 10,704 | 2 | 0 | 186.8 |
| 2012 Q4 | 10,652 | 0 | 0 | 0.0 |
| 2012 Q3 | 10,359 | 2 | 1 | 193.1 |
| 2012 Q2 | 10,317 | 0 | 0 | 0.0 |
| 2012 Q1 | 11,006 | 0 | 0 | 0.0 |
| 2011 Q4 | 11,205 | 10 | 1 | 892.5 |
| 2011 Q3 | 11,709 | 0 | 0 | 0.0 |
| 2011 Q2 | 7,591 | 2 | 0 | 263.5 |
| 2011 Q1 | 8,601 | 3 | 0 | 348.8 |
| 2010 Q4 | 10,749 | 0 | 0 | 0.0 |
| 2010 Q3 | 12,068 | 6 | 2 | 497.2 |
| 2010 Q2 | 11,138 | 0 | 0 | 0.0 |
| 2010 Q1 | 9,951 | 4 | 1 | 402.0 |
| 2009 Q4 | 10,286 | 0 | 0 | 0.0 |
| 2009 Q3 | 10,172 | 0 | 0 | 0.0 |
| 2009 Q2 | 9,739 | 1 | 0 | 102.7 |
| 2009 Q1 | 10,087 | 2 | 0 | 198.3 |
| 2008 Q4 | 11,947 | 0 | 0 | 0.0 |
| 2008 Q3 | 12,717 | 0 | 0 | 0.0 |
| 2008 Q2 | 12,375 | 0 | 0 | 0.0 |
| 2008 Q1 | 11,166 | 1 | 0 | 89.6 |
| 2007 Q4 | 11,495 | 3 | 1 | 261.0 |
| 2007 Q3 | 12,534 | 0 | 0 | 0.0 |
| 2007 Q2 | 12,249 | 2 | 0 | 163.3 |
| 2007 Q1 | 11,294 | 0 | 0 | 0.0 |
| 2006 Q4 | 12,611 | 0 | 0 | 0.0 |
| 2006 Q3 | 12,952 | 0 | 0 | 0.0 |
| 2006 Q2 | 11,985 | 0 | 0 | 0.0 |
| 2006 Q1 | 11,182 | 1 | 0 | 89.4 |
| 2005 Q4 | 11,403 | 0 | 0 | 0.0 |
| 2005 Q3 | 12,636 | 0 | 0 | 0.0 |
| 2005 Q2 | 12,332 | 0 | 0 | 0.0 |
| 2005 Q1 | 10,646 | 3 | 0 | 281.8 |
| 2004 Q4 | 12,188 | 0 | 0 | 0.0 |
| 2004 Q3 | 11,443 | 0 | 0 | 0.0 |
| 2004 Q2 | 11,456 | 0 | 0 | 0.0 |
| 2004 Q1 | 10,923 | 0 | 0 | 0.0 |
| 2003 Q4 | 12,619 | 3 | 0 | 237.7 |
| 2003 Q3 | 13,244 | 0 | 0 | 0.0 |
| 2003 Q2 | 11,603 | 10 | 3 | 861.8 |
| 2003 Q1 | 11,005 | 8 | 1 | 726.9 |
| 2002 Q4 | 12,168 | 0 | 0 | 0.0 |
| 2002 Q3 | 12,425 | 0 | 0 | 0.0 |
| 2002 Q2 | 12,935 | 2 | 0 | 154.6 |
| 2002 Q1 | 14,378 | 0 | 0 | 0.0 |
| 2001 Q4 | 13,466 | 2 | 0 | 148.5 |
| 2001 Q3 | 14,046 | 0 | 0 | 0.0 |
| 2001 Q2 | 13,713 | 0 | 0 | 0.0 |
| 2001 Q1 | 12,715 | 0 | 0 | 0.0 |
| 2000 Q4 | 13,228 | 0 | 0 | 0.0 |
| 2000 Q3 | 14,020 | 0 | 0 | 0.0 |
| 2000 Q2 | 13,885 | 3 | 2 | 216.1 |
| 2000 Q1 | 12,510 | 0 | 0 | 0.0 |
Incidentes reportables
69 en archivo2026 · 1 incidente
2025 · 1 incidente
A miner was cutting a piece of skirt board rubber when the belt knife slipped causing them to cut through their jeans into their thigh. The cut was not bleeding but clinic placed two stiches on the cut to prevent it from opening up.
2024 · 1 incidente
EE was operating a skid steer and noticed the attachment wasn't secured. EE stepped out of the machine to secure the attachment and EE's finger came across a metal burr on the attachment cutting EE's finger resulting in stitches.
2022 · 1 incidente
While trimming a piece of skirt board rubber, the knife slipped on the surface, piercing left pinky finger, causing a laceration.
2021 · 2 incidentes
A miner was attempting to light the natural gas burner at the Fine Grind Plant when the burner lit with higher intensity than in the past which EE was not expecting. That caused burns on right arm and right hand. EE was transported to the hospital with non life threatening burn injuries. EE was wearing a hooded sweatshirt and gloves at the time of the accident/injury.
While climbing into the CAT truck, something popped in the back of EE's left calf. EE was unable to straighten leg completely or walk more than a few steps unassisted. EE was seen at an occ health clinic for a muscle strain, who recommended PT, which EE has started.
2020 · 1 incidente
While loading the railcar, EE went to raise the access platform so the railcar door could clear the platform. EE grabbed the platform with right hand and pulled up to lift it. EE felt a pop in right elbow. Diagnosed with tennis elbow.
2019 · 1 incidente
Attempting to take sample from discharge chute. EE believes shovel contacted moving belt under chute, causing it to jump. EE's RT pinky finger came into contact with the conveyor frame. The impact caused the nail to catch on the frame and pull nail from nail bed, the nail lacerating the fingertip.
2017 · 1 incidente
Loading customer truck. The air line to the gate valve froze due to subzero temps. EE attempted to access platform, carrying a weed burner to thaw air lines. EE's hand slipped off the rung, EE fell backwards, left arm struck handrail. EE then fell down the set of steps.
2015 · 2 incidentes
Using a loader to move an oversized rock. As he raised bucket & started forward, rear tires of loader came off ground, causing rock to fall out of bucket. Loader rocked back/forth, causing employee to bounce around, developing back pain, he was wearing seat belt.
Using a pry bar to get a cable unstuck on a loading spout for the south mineral filler bin. The cable slipped, causing pry bar to come off spout, his RT hand came in contact with an angle iron, across the top of 5th finger & knuckle. Fracture to right 5th finger. Splinting. Light duty restrictions.
2014 · 1 incidente
Employee was descending stairs, carrying a small piece of steel in his right hand & using his left hand as guide on handrail. He misjudged a step and slid. His left hand slid on handrail, his left 4th & 5th fingers split between the handrail support, pulling his 5th finger backwards. He went to occ health & was given a splint. No fracture.
2013 · 2 incidentes
EE was operating track mobile to position onto tracks to load railcars. As he was positioning the track mobile to go back on rail, left rear tire rim failed. A piece of the rim swung up against side of the cab, striking cab & employee. The side glass was open and employee leaned out to line up wheels when rim failed causing employee to be struck in the face. Trauma/contusions.
Hearing loss reported 4-10-13 but was not determined to be work related until 6-07-13.
2012 · 1 incidente
He was cutting a piece of truss of stacking conveyor when final cut was made conveyor broke loose & moved. EE was standing on 3rd rung of ladder conveyor did not contact ee or ladder but he jumped off ladder & fell to ground landing on left arm.
2010 · 1 incidente
While pulling a lid into place, finger was pinched between lid and steel beam.
2009 · 1 incidente
Employee had brought a deer skull to work and was cutting off the hide and the knife slipped and cut his hand - required stitches.
2007 · 2 incidentes
EE believed airlock was plugged. He did not de-energize machine. Did not use lock out procudure. EE remved a plate from the chute and stuck his hand into the discharge chute. His hand contracted the energized airlock and finger (3) were cut off.
EE was sliding skirt board plates into hopper. He twisted as he attempted to push the skirt board to a co-worker on other side of opening.
2006 · 2 incidentes
Climbing down ladder on Cat 771D (Eqp #313), slipped and banged up knee on the steel ladder.
After working on a shot, arms and legs went numb; took a break, heat exhaustion. **New diagnosis of Mono**
2004 · 1 incidente
WHILE EXITING SKID LOADER, SLIPPED ON ICE AND FELL, HIT HEAD ON GROUND. WAS REMOVING SNOW ON ROAD COMING INTO THE QUARRY.
2003 · 1 incidente
HAMMERING A PIN OUT OF A LOADER WHEN A PIECE OF THE PIN CHIPPED OFF AND LANDED IN LEFT ARM, REQUIRING STITCHES.
2002 · 2 incidentes
CUTTING A PIECE OF CONVEYOR BELT - KNIFE SLIPPED OFF BELT AND CUT HIS HAND.
OPENING HATCHES ON RAILCAR, HE STEPPED ACROSS OPENING & TRIPPED, CATCHING HIMSELF WITH HIS LEFT ARM CAUSING A STRAIN TO HIS ARM.
1998 · 1 incidente
CLEANING THE SURGE TUNNEL. SHOVELING FINE CRUSHED STONE ONTO SURGE BETL. STRAIND BACK.
1997 · 3 incidentes
CLEANING OUT A HOPPER JUMPED FROM PLATFORM TO THE GROUND LEFT HEEL LANDED ON A ROCK FRACTURED HEEL.
EE WAS PULLING ON A COMEALONG WHEN A PAIN WAS FELT IN LOWER ABDOMEN.
INJURED WAS WALKING TO CONTROL ROOM OF FINE GRIND PLANT AND SLIPPED ON AN ICY SURFACE CAUSING HIM TO FALL AND HIT THE BACK OF HIS HEAD ONT HE GROUND CUTTING IT OPEN.
1996 · 3 incidentes
INJURED WAS DRIVING BACKHOE BY STEEL PILE WHEN AN UNKNOWN OBJECT HIT HIM IN THE LEFT EYE.
INJURED WAS GRINDING A PIECE OF METAL ON GRINDING WHEEL. A SMALL PIECE OF THE GRINDING WHEEL FLEW OFF AND INTO LEFT EYE.
INJURED WAS USING CUTTING TORCH CUTTING STEEL PLATE. HOT METAL WENT UNDER SAFETY GLASSES ENTERING THE RIGHT EYE.
1994 · 1 incidente
INJURED HAD JUST BACKED VOLVO TRUCK UNDER BIN HE SAW SYMONS MILL WAS STALLED INSTEAD OF CLIMBING DOWN FROM TRUCK HE JUMPED OUT OF TRUCK TO STOP FEED HE HIT HIS HEAD ON PROTRUDING 1 BEAM FROM S TORAGE BIN
1993 · 2 incidentes
INJURED WAS REMOVING BROKEN FLIGHT FROM DISCHARGE END OF FINE GRIND DRYER. HE LIT CUTTING TORCH & DID SOME CUTTING. TORCH WAS TURNED OFF & CUT PIECES REMOVED. WHEN TORCH WAS RELIT TO FINISH TH E JOB, IT IGNITED GAS IN DRYER, RESULTING IN FIRE & EMPLOSION. THIS KNOCKED INJUIRED OFF OF CATWALK WHICH WAS ABOUT 8' OFF OF THE GROUND. INJURED RECEIVED BURNS ON FACE, HANDS FROM FIRE, PAIN
IN ORDER TO CHANGE TRANSFER BOX, INJURED WAS STANDING ON STONE SKIRT BOARD THAT KEEPS STONE ON CONVEYOR BELT. HE LOST HIS BALANCE, FELL BACK, RAISED HIS ARMS FOR BALANCE, SHIRT SLEEVE GOT CAUG HT IN CONVEYOR THAT WAS RUNNING ABOVE HIM, PULLED HIM INTO RETURN IDLER & BROKE HIS ARM.
1992 · 5 incidentes
INJURED WAS CHANGING BLOW BARS ON IMPACT CRUSHER, USING A 10 LB SLEDGE HAMMER TO LOOSEN BARS IN MILL. WHEN HE STRUCK BAR, A CHIP FLEW OFF SLEDGE HAMMER HEAD AND STRUCK INJURED.
MAKING WIRING CHANGES=FORGOT TO TURN POWER BACK OFF (HAD BEEN TURNED OFF & ON SEVERAL TIMES.) SHORT OF 440 WIRING TO GROUND.
INJURED WAS DIGGING NEW PUMP HOLE WITH FRONT END LOADER. LOADING STONE OUT OF APPROX. TWO FEET OF WATER, DID NOT SEE HOLE AND LEFT FRONT WHEEL FELL INTO IT, CAUSING INJURED TO BUMP HIS ELBOW I NJURED WAS WEARING SEAT BELT.
INJURED WAS USING A SURFACE GRINDER,GRINDING ON A PIECE OF METAL.WHEN HE FINISHED THE JOB HE COMPLAINED OF EYE IRRITATION.HE WAS USING GLASSES AND SHIELD.
INJURED WAS TAKING NEW CRUSHER PARTS OUT OF STEEL DRUM. WHILE LIFTING CAUGHT FINGER ON SHARP EDGE OF DRUM CAUSING CUT.
1991 · 6 incidentes
INJURED, AFTER CLEANING BAG HOUSE WAS CLIMBING DOWN AND SLIPPED ON CONCRETE TUNNEL AND FELL INTO I BEAM CAUSING PAIN TO RIGHT SHOULDER. REPORTED ACCIDENT TO WILLIAM FENNIG ON 12-13-91. DIDN' T GO TO DOCTOR UNTIL 02/01/92.
INJURED WAS CLOSING PICKUP TRUCK DOOR & CAUGHT FINGER IN DOOR
INJURED WAS USING CHIPPING HAMMER TO REMOVE FLUX OFF OF PIECE HE WAS WELDING. HE LIFTED WELDING HELMET WHEN CHIPPING LFUX, BUT PIECE OF FLUX ENTERED RIGHT EYE FROM BOTTOM SIDE OF GLASSES.
LOADER OPERATOR WAS USING BUCKET LOADER TO LIFT 4-200 LB HAMMERS TO INSTALL IN SECONDARY CRUSHER. INJURED EE WAS FACING LOADER DIRECTING OPERATOR INTO POSITION TO RAISE HAMMERS INTO POSITION T O UNLOAD. AS HE WAS DIRECTING LOADER, HE FAILED TO NOTICE BIN SPOUT BEHIND HIM, AND THE LOADER BUCKET PINNED HIM AGAINST SPOUT./
INJURED WAS WELDING ON NEW CHUTES, WEARING HELMET & SAFETY GLASSES, HE RAISED HELMET TO SEE TO CHIP OFF FLUX. WHEN CHIPPING A PIECE OF FLUX GOT BEHIND GLASSES AND ENTERED EYE.
AFTER STARTING TRUCK,SLIPPED AND FELL ON ICE.
1990 · 5 incidentes
INJURED WAS HANDING WELDING HELMET TO ANOTHER EMPLOYEE OVERHEAD. CLAMP ON END OF GROUND WIRE ON WELDER HIT INJURED IN MOUTH.
PULLING DOOR OFF OF CAGE MILL SCREW, CAME OFF STONE STARTED LEAKING OUT INJ JUMPED BACK, STUMBLED HIT HIS SHIN ON ELECTRIC MOTOR
INJURED WAS SWINGING ROCK CHUTE TO DIFFERENT CONVEYOR AND CAUGHT WEDDING RING WHILE CLIMBING DOWN FROM THE CHUTE AFTER CHANGING SAME.
INJURED WAS PUTTING NEW BOLTS IN DRIER FLIGHTS. INJURED WAS CHIPPING SCALE OFF OF OLD BOLTS. PIECE OF SCALE GOT UNDER GLASSES IN LEFT EYE.
REPLACING WEDGES BEHIND HAMMER IN MILL, USING DRIVING BAR AND SLEDGE HAMER ON WEDGES THE DRIVING BAR SLIPPED AND INJ HIT FINGER
1989 · 8 incidentes
INJURED WAS GOING UP 8 FOOT LADDER TO BRADLEY MILL ROOM. INJURED MISSED RAIL ON LADDER AND FELL BACK AND HIT SCREW CONVEYOR.
INJURED WAS USING HIGH PRESSURE WATER HOSE 1 TO 2 INCH IN SIZE TO WASH TUNNEL. THE BRASS HOSE CONNECTION BROKE LOOSE, CAUSING HOSE TO FLIP AND FITTING STRUCK INJURED IN LEFT LEG.
INJURED WAS WALKINGTO WORK STATION-STEPPED ON A PIECE OF SNOW COVERED RUBBER MATTING, SLIPPED AND FELL ON LEFT WRIST.
INJ CLEANING UNDER HOPPER BOX SLIPPED ON A STEP AND CUT RIGHT LEG.
WHILE MOVING ROCK TO UNPLUG CRUSHER ANOTHER ROCK SHIFTED CATCHING INJUREDS FINGER BETWEEN ROCK AND CRUSHER
INJURED WAS LAYING UNDER TRUCK, TIGHTENING BOLTS TO INSTALL MASNIFOLD PIPE. A DROP OF OIL DROPPED OFF OF TRANSMISSION, HITTING INJURED ON SIDE OF FACE. THE OIL RAN UNDER GLASSES CARRYING FOR EIGN SUBSTANCE INTO EYE.
INJURED WAS STANDING AT WORK STATION IN LAB OFFICE THOUGHT CHAIR WAS CLOSE. WHEN HE STARTED TO SIT CHAIR WAS AT ANOTHER DESK FELL ON REAR & BACK.
EMPLOYEE WAS CUTTING UP DISMANTLED CONVEYOR TOWER, USING CUTTING TORCH. HOT SPARKS IGNITED SWEATSHIRT SLEEVE.
1988 · 2 incidentes
INJ CLIMBING DOWN STEPS OF LOADER TO GROUND.STEPPED ON ROCK AT BOTTOM OF LADDER.ROCK ROLLED CAUSING EMPL TO TWIST KNEE.
WHILE INSTALLING NEW WASHER SPRAY BAR ON SHAKER SCREEN, INJURED WAS PUSHING SPRAY BAR THRU OPENING IN SIDE OF SCREEN FRAME, CUT FINGER ON EDGE OF PIPE.
1987 · 6 incidentes
EMPLOYEE WAS HE5PING PUT SPLICE IN CONVEYOR BELT CLIMBING OVER BELT TO GET TO FAR SIDE TO INSTALL BELT SPLICES HE SLIPPED AND CAUGHT RT THUMB IN CHAIN ON HOIST BELT WAS NOT RUNNING
WELDING ON CRUS2ER TOGGLE PLATE IN SHOP.WHEN HE RAISED WELDING HELMET SLAG POPPED HITTING RIGHT EYE.
EE WAS STARTING3PLANT FOR DAYS RUN. HE PUSHED STAT BUTTON, POWER LINE BLEW OVER HIS HEAD. HE WAS EITHER KNOCKED OF JUMPED BACKWARD TO GORUND. HE WAS SHAKEY BUT COHERENT & SEEMED ALRIGHT. 20 MI NUTES LATER GOT3SICK & VOMITED. HE WAS TAKEN TO H OSPITAL FOR CHECKUP.
EMPL DIGGING OU7 TOE AT BASE OF HIGHWALL.LOADER OR BUCKET OF LOADER SLIPPED OFF TOE THROWING EMPL IN CAB INJURING BACK.
INJURED WAS CHE7KING MILL,WAS COMING DOWN LADDER,TOOLS IN HAND-HAND SLIPPED AND HE FELL BACKWARD AND HIT A SCREW OR AUGER ON HIS BACK.
INJURED WAS CHA3GING SCREENS ON BOTTOM DECK OF 3 DECK SCREEN AND TWISTED KNEE WHILE CRAWLING UP SCREEN DECK
1986 · 1 incidente
EMPLOYEES WERE 1REPARING TO PLACE STEEL IN POSITION TO CUT TO SIZE FOR REPAIR WORK. TWO EMPLOYEES WERE LIFTING A PIECE OF 3 INCH ANGLE IRON, AND AS INJURED LIFTED HE TWISTED SIDEWAYS PULLING MUSCELES IN LOW9R BACK.
1984 · 1 incidente
INJURED WAS PUTTING SEALS IN DIFFERENTIAL OF CAT TRUCK. PUSHED SEAL RING IN PLACE BY HAND. THE RING THEN POPPED OUT & STRUCK THE TOP OF THE RIGHT HAND WITH SHARP EDGE OF SEAL RING.