Buscar en el registro

Employee was tightening a "J" hook during a screen change using a wrench when he strained his left shoulder.

EE was striking a wedge with a sledge hammer. He missed the wedge and the hand holding the hammer handle struck against the wedge causing a contusion to right index finger and nail.

Employee was cleaning dirt build-up around a head pulley using a metal bar. The bar got caught in the pulley, causing the employees thumb to get pinched by pulley head.

Employee was striking an allen key socket into an allen key bolt with a hammer. A piece of the socket broke off and hit him on his left forearm causing laceration - 6 stitches.

Employee was cleaning a shaker chute with a 20 pound chipping hammer, when the hammer broke thru encrusted material, he was pitched foward and felt lower back pain.

Employee was using a utility knife to cut a plastic bottle. The knife slipped and cut employee's right wrist - 3 stitches plus tetanus shot.

Employee was shoveling stone, the shovel hit something solid causing sprain to right wrist & forearm.

Employee was cleaning area around a feed plate using a steel bar. The bar slipped causing employee'e right hand to strike a dust suppressor fitting causing a fracture to his right ring finger.

Employee was holding a metal pipe under a rock hammer as it was being lowered into a box for shipping. As the hammer fell into box, the pipe was jerked downward causing back pain to employee.

Employee was freeing a jammed stone feeder with a pole when a 6 inch core stone was dislodged and struck the top of the employee's left hand causing an abrasion / contusion.

An employee using a sledge hammer to tigten a wedge plate bolt struck fellow employee who was holding slugging wrench on left bicep when the hammer glanced off the wrench.

Employee was loosening nuts with a rachet & socket when he received a lumbar strain.

Employee was cutting brush with a machete, when he struck himself on the right shin with the blade, causing laceration - 3 stitches.

Employee was holding a wrench and turned his body slightly when he felt a pain in his lower back. He was not apply torque to the wrench. He was diagnosed with a thoratcic sprain.

EE was using a sledge hammer while changing a shaker screen. His right index finger was crushed between shaker hopper and hammer when he missed the hit pin. He received a blackened nail.

EMPLOYEE WAS HOLDING A CRUSHER WEDGE DOWN WITH A PRY BAR WHEN HE WAS HIT IN THE ABDOMEN WITH A SLEDGE HAMMER BY A CO-WORKER WHO WAS HITTING THE WEDGE. THE HAMMER GLANCED OFF THE WEDGE & HIT HIM CAUSING A STOMACH CONTUSION.

Ee was hit in mouth by a come-a-long handle that he was standing near, which shifted causing ee to cut his lip & chip his front teeth.

EMPLOYEE WAS KNOCKING PISTON OUT OF AN ENGINE WITH A HAMMER. THE PISTON CAME OUT AND PINCHED EMPLOYEE'S FINGER BETWEEN PISTON AND EDGE OF CRANKSHAFT CAUSING LACERATION REQUIRING 3 STITCHES.

EMPLOYEE WAS PERFORMING ADJUSTMENT ON STONE CRUSHER WITH A WRENCH WHICH WAS BEING STRUCK BY A CO-WORKER USING A HAMMER. EMPLOYEE'S FINGER GOT PINCHED BETWEEN WRENCH HANDLE AND CRUSHER FRAME.

EMPLOYEE WAS USING A UTILITY KNIFE TO CUT A PIECE OF RUBBER CONVEYOR BWLT WHEN HE CUT HIS LEFT INDEX FINGER TOP - 8 STITCHES.

EE WAS USING A SLEDGE HAMMER TO REMOVE A HYDRAULIC CYLINDER WHEN HE STRUCK HIS HAND WITH HAMMER.

EE WAS USING A CHISEL & HAMMER TO CUT A BROKEN BOLT. A PIECE OF THE BOLT HEAD BROKE OFF, STRIKING EE IN LT. FOREARM.

EE WAS CLEANING UNDER THE PRIMARY CRUSHER. WHEN HE THREW A SHOVEL FULL OF DIRT, HE FELT PAIN IN HIS LOWER BACK.

EE WAS POKING CLOGGED MATERIAL WITH A METAL BAR THAT WAS CAKED IN A CHUTE. THE BAR SLIPPED, SMASHING HIS FINGER BETWEEN THE BAR AND A HAND RAIL.

EMPLOYEE WAS MOVING A BULL SCREEN INTO POSITION USING A COME-ALONG. THE SCREEN PINCHED HIS RIGHT PINKY BETWEEN I-BEAM AND THE COME-ALONG HOOK.

WHILE LOWERING A CORE CHUTE ON TO A CONVEYER BELT, THE CHUTE SLIPPED PINCHING EMPLOYEE'S HAND BETWEEN CHUTE AND CONVEYER SIDE RAIL CAUSING SPRAIN AND BRUISE.

EMPLOYEE WAS HOLDING A LARGE WRENCH WHILE FELLOWWORKER STRUCK IT WITH A SLEDGE HAMMER TO LOOSEN A BOLT. THE FELLOW EMPLOYEE MISSED THE WRENCH AND HIT EMPLOYEE IN THE HIP AND ABDOMEN CAUSING CONTUSION AND BRUISES.

WHILE ADJUSTING A CRUSHER, EMPLOYEE PINCHED THUMB BETWEEN WRENCH AND SIDE OF CRUSHER.

WHILE TIGHTENING A 4 FT CRUSHER, EMPLOYEE STRUCK THUMB WITH SLEDGE HAMMER.

WHILE CLEANING STONE OFF CONVEYOR BELT, EMPLOYEE FELT TWINGE IN RIGHT HIP AREA.

EE WAS STRUCK ABOVE RIGHT EYE WHEN A CHAIN HOIST HOOK CAME OFF THE ANGLE IRON AND SWUNG INTO EE.

WHILE STRIKING A PIN INTO A HAUL TRUCK LIFT CYLINDER, A PIECE OF THE METAL PAIN BROKE OFF AND STRUCK THE EE BELOW LOWER LIP.

EE WAS RAISING A COUNTER WEIGHT ON A CONVEYOR WITH A COME-A-LONG. WHEN HE STOOD UP HE HIT HIS SHOULDER ON A BEAM.

EE WAS USING A SLEDGE HAMMER IN CONFINED CHUTE WHEN HE STRUCK HIS ELBOW ON BACK SWING.

WHILE TIGHTENING 7 FT CRUSHER, THE CHAIN ON THE COMEALONG BROKE STRIKING THE EE IN LEFT TESTICLECAUSING BRUISE

EE WAS SWINGING A SLEDGE HAMMER AND HIT SELF IN LEG.

EMPLOYEE WAS USING A HAMMER AND PUNCH WHEN PUNCH SLIPPED AND HIT THE INSIDE OF HIS PALM CAUSING NUMBNESS TO FINGERS.

EE WAS BENT OVER USING A SLEDGE HAMMER IN A TIGHT AREA DRIVING A STAKE INTO THE GROUND, CAUSING LUMBAR SPRAIN.

EMPLOYEE HIT AN OIL PUMP SHAFT THAT WAS STUCK WITH A HAMMER, A PIECE BROKE OFF AND CUT HIS FINGER.

EMPLOYEE WAS CUTTING BOX ARMOUR CALBE WIRE ANND CUT LEFT INDEX FINGER 3 STITCHE SNEEDED.

EMPLOYEE WAS WORKING WITH SANOTHER EMPLOYEE REMOVING BOWL ASSEMBLY FROM 4 FT SHORT HEAD CRUSHER WHEN PORTA-POWER JACK SLIPPED FROM ITS POSITION AND STRUCK EMPLOYEE ABOVE THE LEFT EYE.

WHILE PUSHING STONE INTO 7FT CRUSHER WITH STEEL BAR EMPLOYEE COMPLAINED OF PIN IN BACK

EMPLOYEE WAS CUTTING A TAIL PULLEY FLAP WITH A RAZOR KNIFE. WHEN HE BROUGHT THE RAZOR AROUND IT CUT THRU THE FLAP AND CAME DOWN ON HIS RIGHT LEG- MID THIGH. EMPLOYEE NEEDED 12 STITCHES.

EMPLOYEE WAS STRIPPING BATTERY CABLES WITH A RAZOR BLADE. THE RAZOR SLIPPED AND CUT HIS THUMB.

EMPL HAMMERING BARS IN DIRT SHAKER AND FELT PAIN IN BACK.EMPL WAS WORKING IN AN AWKWARD POSITION

I.NAME LEFT THE CLEAN UP JOB AT THE SECONDARY PLANT, CAME UP TO THE PRIMARY CRUSHER AND HELD THE WRENCH FOR THE EMPLOYEES THAT WERE HITTING IT WITH A HAMMER TO TIGHTEN THE WEDGE PLATE BELTS. L ATER ON AFTER THE PLANT WAS RUNNING, HE CAME TO HIS SUPERVISOR AND COMPLAINED THAT HOLDING THE WRENCH HAD HURT HIS BACK. SUPERVISOR DID NOT INSTRUCT EMPLOYEE TO PERFORM THIS TASK. EMPLOYEE TO

INJURED & ANOTH9R EE WERE TIGHTENING DEAD AR6 BOLT ON 2180 & PIPE EXTENSION SLIPPED OFF WRENCH HITTING I.NAME ON RT KNEE.