Buscar en el registro

Employee was using mitre saw to dimnsion 2x4 lumber, lumber vibrated against blade, pinching left middle finger between guard and wood, cut/fracture, tip of finger.

EE WAS HELPING ANOTHER EE CHANGE BUCKET TEETH ON TRACK HOE 52B. 4 OF THE 6 TEETH CAME OFF WITH SOME EFFORT, THE LAST 2 WERE NOT COMING OFF EVEN WITH A LOT OF EFFORT, FOLLOWING PROPER MAINT PROCEDURES OF USING A HAMMER TO STRIKE THE TOOTHTO FREE THE PIN WAS USED. FRAGMENT FLEW OFF FROM THE TOOTH SOME DISTANCE FROM THE HAMMER STRIKE EE IN HIS LEFT THIGH.

EE WAS CUTTING CONVEYOR BELT TO RE-LACE IT. HE WAS HOLDING A T-SQUARE ON TOP OF THE BELT WITH HIS LEFT HAND AND CUTTING THE BELT WITH A RAZOR SAFETY KNIFE IN HIS RIGHT HAND. THE RAZOR SAFETY K NIFE SLIPPED AND CUTH HIS LEFT THUMB.

EMPLOYEE WAS ATTEMPTING TO FREE A 4" BEARING FROM A SHAFT BY USING A HAMMER TO DISLODGE THE UNIT. AS HE STRUCK THE BEARING, A SMALL PIECE OF METAL BROKE OFF FROM THE BEARING FACE AND LODGED IT SELF UNDER SKIN OF LOWER LEG.

EE WAS ATTEMPTING TO CHANGE TIRE ON BOBCAT UTILITY LOADER ON LEFT REAR. IN PROCESS OF JACKING MACHINE UP TO CHANGE TIRE, THE JACK SLIPPED FROM MACHINE, PINNING HIS RT HAND BETWEEN FRAME AND TI RE. MIDDLE AND RING FINGERS WERE CUT, MIDDLE FINGER HAS POSSIBLE FRACTURE (CLOSED).

MECHANIC WAS REPAIRING A HYDRAULIC HOSE ON BULL DOZER WHILE LOWERING THE SKID PAN WITH A CHAIN HOIST THE PAN HUNG UP ON THE A FRAME GIVING THE IMPRESSIONT IT WAS ON THE GROUND WITH A SLACK CHA IN HE WENT TO REMOVE THE HOIST THE PAN SLIPPED PINCHING HIS FINGER BETWEEN THE CHAIN & THE DOZER

EMPLOYEE WAS SWEEPING DOWN CLAY FROM OVERHEAD INSIDE DUST COLLECTOR; LOOKED UP AND CLAY FELL INTO EYES. SAFETY GLASSES WERE BEING USED, BUT CLAY FELL AROUND THE OUTER FRAME AREA.

EMPL REPAIRING PTO CABLE UNDERNEATH BOOM TRUCK.AREA FOR WORK VERY CRAMPED EMPL HAND SLIPPED CAUSING HIM TO HIT HEAD ON TRUCK FRAME.

EMPL LOOSENING MOUNTING BOLT ON FOOT OF BLOWER.WRENCH SLIPPED OFF AND EMPL CUT FINGER ON GUARD MOUNT.

PULLER BOLT STRIPPED OUT WHILE EMPLOYEE WAS WORKING ON A PROCESS PUMP CASE. THIS CAUSED EMPLOYEES WRENCH TO SLIP AND HIS ARM STRUCK SHARP EDGE OF PUMP CASE.

EMPL WAS CHANGING TIRE ONPAYLOADER & BAR SLIPPED OFF ONE OF NUTS. MIDDLE FINGER ON RIGHT HAND WA MASHED BETWEEN CHEATER BAR & GROUND.

EMPLOYEE WAS USING A FLOOR JACK TO MOVE A HOPPER FULL OF CLAY. THE WHEELS OF THE FLOOR JACK BECAME STUCK IN A HOLE OR RECESSION IN THE FLOOR SO THE EMPLOYEE MANUALLY TRIED TO MOVE THE JACK AN D TRIED PULLING IT OUR OF THE HOLE OR RECESSION AND STRAINED HIS BACK.

EMPLOYEE WAS ATTEMPTING TO ALIGN CABLE LUG SOCKET. CHAIN HOLDING CABLE SLIPPED AND CABLE SOCKET PINNED RIGHT HAND AGAINST HAND RAIL.

EMPLOYEE WAS CUTTING KNOT OUT OF PLASTIC WITH KNIFE AND CUT HIS RIGHT THIGH.

EMPLOYEE WAS BOLTING 20" PIPE WHEN WRENCH SLIPPED OUT OF HELPERS HAND HITTING EMPLOYEE ON RIGHT KNEE.

PRYING WITH PRY6AR, BAR SLIPPED, HAND STRUCK PIPE

EMPLOYEE WAS PRYING ON BLOW BAR ON HAMMER MILL ROTOR AND STANDING IN AWKWARD POSITION. ROTOR TURNED CAUSING BAR TO SLIP, STRAINING SHOULDER AND NECK.

LOOSENING A NUT3 ON THE TRANSFORMER SLED WHEN THE NUT BROKE LOOSE SUDDENLY

EMPLOYEE WAS BEATING ON A FEEDER BIN (WHILE ITWAS IN OPERATION) WITH A HAMMER. FEEDER CAUGHT HANDLE OF HAMMER AND HANDLE OF HAMMER MADE HEAVY CONTACT WITH THE FINGER. FINGER WAS BROKEN ON THE TIP END JOINT AND CUT. THE EMPLOYEE IS REQUIRED TO WEAR A FINGER SPLINT FOR THREE WEEKS.

EMPLOYEE WAS WORKING ON SPRINKLER SYSTEM IN CLOSE QUARTERS WHEN THE PIPE WRENCH HE WAS USING SLIPPED. HE STRUCK HIS ELBOW ON THE SHELF BEHIND HIM, INJURING HIMSELF

TIGHTENING FACE PLATE ON PUMP.

CLOSING R/R CAR DOOR WITH 5\ BAR BAR SLIPPED EE FELL & ANOTHER EE FELL ON TOP OF HIM.

OPENING DOOR ON BOTTOM OR RR CAR BAR SLIPPED EMPLOYEE FELL

EMPLOYEE WAS CHIPPING ICE AWAY FROM THE SKIP TRACK WITH A PICK. THE POINT OF THE PICK STRUCK THE GROUND AND BOUNCED, STRIKING HIS LEFT FOOT AT THE INSTEP.

SUPERVISOR WAS TRYING TO KNOCK THE KEEPER PIN OUT RIGHT TRUNNION ON THE DRAGLINE BUCKET MISSED THE KEEPER THE HAMMER SLIPPED AND AND STRUCK EMPLOYEE

REPAIRING WINDSHIELD WIPER ARM PRTING PORTION OF ARM,TOOL SLIPPED STRIKING RIGHT THUMB.USING PUTTY KNIFE AS TOOL.

HOLDING DOOR LATCH UP WHILE CO-WORKER PRIED ON DOOR CAUSING DOOR TO SPRING OPEN CATCHING FINGER BETWEEN R R CAR DOOR AND LATCH.

WHILE TIGHTENING THE TACKING ON B SECONDARY LOG TRYING TO REMOVE WRENCH AND THE WRENCH GOT CAUGHT IN SHAFT COUPLING FINGER CAUGHT BETWEEN WRENCH AND SHAFT COUPLING

EMPLOYEE PULLING CABLE WITH ROPE ANDTHE ROPE CAUGHT THEN LOOSENED MAKING HIS RIGHT HAND TWIST BACKWARDS

EMPLOYEE OPENING CAN OF CAM DOPE WITH POCKET KNIFE AND CUT FOREARM LEFT.

HIT ON NOSE WITH HEAVY PIECE OF CHAIN (CUM-A -LONG).