Buscar en el registro

WAS ON THE BACK OF XL5110 SCALER. WAS IN PROCESS OF ADDING OIL TO THE HYDRAULIC TANK AND WAS ATTEMPTING TO REMOVE THE PLUG WHEN WRENCH SLIPPED OFF PLUG INJURING FINGER.

WHILE TRYING TO PUNCH OUT CUT OFF BOLTS ON CRUSHER, MISSED HITTING FINGER WITH SLEDGE HAMMER.

WHILE EMPLOYEE WAS ON TOP OF GRIZZLY POUNDING ROCKS OUT OF GRIZZLY WITH A #12 SLEDGE HAMMER, A PIECE OF ROCK BROKE AWAY, FLEW AND HIT EMPLOYEE IN THE RIGHT EYE UNDER HIS SAFETY GLASSES.

EMPLOYEE WAS CROUCHED DOWN ON 3A CATWALK TIGHTENING BELT CLIP IN 55' BELT. HE WAS USING A WRENCHON THE LOWER SIDE OF THE BELT AND A RATCHET ON THE TOP SIDE OF THE CLIP. SOCKET SLIPPED OFF NUT AND EMPLOYEE FELL BACKWARD.

INSIDE HAZEMAG CRUSHER TAPPING ON BLOW BAR KEEPERS WITH SLEDGE HAMMER. WHILE HITTING WITH THE SLEDGE, HE FELT PAIN IN HIS NECK.

EMPLOYEE WAS STANDING BESIDE CRUSHER HOLDING SPUD WRENCH. WRENCH HIT BY OTHER EMPLOYEE AND PINCHED HIS HAND BETWEEN WRENCH AND TOP SHELL OF

WHILE ON SUPPLY BARGE CUTTING NYLON BANDS ON ROLL OF SKIRT RUBBER WITH UTILITY KNIFE, KNIFE SLIPPED ON NYLON BAND AND CUT HIS LEFT KNEE REQUIRING SIX STITCHES.

WHILE BETWEEN HIGHLIFT AND BUCKET FIXING A PIN, SWUNG THE HAMMER AND MISSED, HITTING FINGER.

ON DIESTER SCREEN DECK TIGHTENING BOLTS ON SCREENS WITH HAND WRENCH. WRENCH SLIPPED AND SMASHED 5TH RIGHT FINGER, PARTIALLY REMOVING FINGERNAIL. SUTURES REQUIRED.

CUT RIGHT THUMB WITH RAZOR KNIFE WHILE CUTTING A LINE.

WAS AT REAR OF BOAT GIW PUMP AREA PULLING ON 1 1/2 TON CHAINBLOCK, LIFTING TAIL OF CONVEYOR. WHILE PULLING ON CHAINBLOCK, STOPPED AND SAID CHEST HURT AROUND HEART AREA.

WAS HAND SCALING IN M-I, E-34, E-32 BEFORE BLASTING. AT THE END OF DAY HE NOTICED A SORENESS.

WHILE HAND SCALING ROCK FROM THE BACK IN W-39, ROCK GAVE WAY AND HE FELT HIS LOWER STONACH AREA PULL.

WHILE SWINGING SLEDGE HAMMER AT THE GRIZZLY TO KNOCK OUT A ROCK, EE SWUNG HAMMER AND SUSTAINED INJURY TO RIGHT SHOULDER, ARM AND NECK.

EE WAS IN M-3 W-37 HAND SCALING THE BACK. EE WAS HELPING SCALE DOWN A LOOSE ROCK, WHEN THE ROCK GAVE WAY. EE'S BAR HIT EE'S BAR SMASHIN EE'S FINGER BETWEEN THE TWO BARS.

HE WAS IN M2 HEADING HAND SCALING PRIOR TO LOADING THE SHOT. HE WAS PRYING A LARGE ROCK FROM THE FACE WHEN HE STRAINED HIS RIGHT SHOULDER.

WHILE CLEANING OUT BOLT HOLES,BAR SLIPPED AND PINCHED LEFT LITTLE FINGER BETWEEN BAR AND LOADER FRAME.

TWO EMPLOYEES WERE TRYING TO DISLODGE AN ADAPTOR THAT WAS STUCK IN A SOCKET BY STRIKING IT WITH A HAMMER AND PIN. THE EMPLOYEE WHO WAS INJURED WAS HOLDING HIS HAND UNDER THE ADAPTOR TO CATCH I T WHEN IT CAME OUT. IT CAME OUT WITH ENOUGH FORCE TO CUT THE EMPLOYEE'S FINGER TIP ON HIS LEFT HAND.

IN MINE WORK AREA M-7 REMOVING FRONT SHEAVE WHEEL FROM FEED CYLINDER WHILE REMOVING FRONT SHEAVE WHEEL FROM FEED CYLINDER, BAR SLIPPED AND PINCHED LEFT HAND BETWEEN CYLINDER AND BOOM.

WAS AT FUEL TANK AREA ON LEFT FRONT OF SCALER. WHILE SWINGING SLEDGE HAMMER TO DRIVE TOOL CYLINDER IN, EE STRAINED HIS RIGHT ARM & SHOULDER, PINCHING A NERVE IN BACK.

WHILE EMPLOYEE WAS ATTEMPTING TO CUT HOLES IN SCRAPER MATERIAL FOR SURGE #1 BELT,BELT KNIFE SLIPPED OUT OF MATERIAL AND CUT EMPLOEYE'S LEG.

WAS CHANGING CRUSHER CAGE.WHILE TIGHTENING A 1/2" CRUSHER BOLT,HIS WRENCH SLIPPED,PINNING HIS FINGER BETWEEN THE CRUSHER FRAME AND THE WRENCH.

WORKING ON TUNNEL BELT CUTTING BELT TO RESPLICE KNIFE SLIPPED CUTTING LEFT THUMB NEEDED 4-5 STITCHES.

WAS REMOVING TRANSMISSION FROM 992 LOADER, WHILE PULLING ON COME-A-LONG, THE HANDLE SLIPPED & STRUCK LEFT ARM.

WHILE AT JAW CRUSHER WALKWAY UNBRIDGING JAW WITH WEDGE, ROCK FELL AND HIT HIM ON CHIN.

WHILE BREAKING ROCK WITH SLEDGE HAMMER IN HOPPERROCK SHATTERED & PIECE FLEW UP CUTTING EMPLS NOSE - 5 STITCHES

CLEANING OUT STONE CRUSHER THAT HAD SHUT OFF,STONE FELL FROM DISCHARGE CHUTE OF SCREEN HITTING EMPLOYEE ON BACK OF NECK WHEN HE BENT OVER.

68935 PRYING ROCKS OUT OF CHUTE FROM CL SCREEN #2 ROCK FELL LOOSE AND LANDED ON BAR,JERKING SHOULDER.

USING CABLE AND COME-ALONG TO PULL STEEL IN PLACE,CABLE SLIPPED HITTING MOUTH KNOCKING LEFT FRONT TOOTH OUT.

EMPL TIGHTENING UP ROCK GUARDS ON D9 DOZER USING 3/4 DRIVE BREAKER BAR AND 4' PIPE.PULLED OUT HIS BACK WHEN TIGHTENING UP ROCK GUARDS.

CAPSTAN CUT LINE WHERE SPLICE AND JERKED LINE AND TWISTED HAND.

EMPLOYEE MOVING BARGE INTO POSITION FOR FURTHER LOADING WITH WORK LIEN ADN CAPSTAIN, SPLICE IN LIEN SNAGGED AND PULLED HIS HAND.

PRYING THE BACK OF PUMP HOUSING INTO PLACE,USING 6'PRYBAR,BAR SLIPPED FROM UNDER IT,WENT FLYING TO THE GROUND.ALSO USING FEET TO TURN LARGE NUT ON BOTTOM ADJUSTER OF JAW CRUSHER.WRENCH SLIPPED ON SEVERAL OCCASIONS PUSHING MY BACK INTO STEEL BEAM THAT IS TO LEFT SIDE OF ADJUSTER NUT.

EMPL WAS TIGHTENING BOLTS ON DRIVE OF C3A CONVEYOR PUSHED WITH FEET & PULLED UP WITH ARMS CAUSING PROSTHESIS TO PROTRUDE 2" FROM PENIS FROM SRAINING. Y

WHILE TURNING BOLTS, ON SECONDARY CRUSHER, EMPLOYEE RIPPED MUSCLES AND TENDONS IN RIGTH SHOULDER.

EMPL WAS REMOVING BEARING FROM 60" CAGE CRUSHER SHAFT A PUNCH WAS BEING USED TO REMOVE SLINGER THE PUNCH SLIPPED WHEN STRUCK SMASHING THE TIP OF RING FINGER OF L HAND

TIGHTENING BOLT ON DOZER. WRENCH SLIPPED OFF OF BOLT & WENT BACKWARDS FALLING ON RIGHT SIDE ON RIBS ON BACK OF PUSH ARM ON TROHJAN BALL ON DOZER KNOCKING WIND OUT OF M E.