Buscar en el registro

TRIPPED OVER GEAR SHIFT WHEN ENTERING DRILL WHILE TRYING TO LOOK AT BOOM AT SAME TIME

CHECKING OIL IN WATER TRUCK, WAS ON RIGHT FENDER CHECKING OIL, HE MISSED THE STEP AS HE WAS CLIMBING DOWN FROM THE TRUCK.

EMPLOYEE WAS ON TOP OF A SCREEN DECK REMOVING SIDE RAILS. AS HE WAS HOLDING A BOLT IN PLACE WITH HIS RIGHT HAND TO ALLOW THE FASTNERS (NUTS) TO BE REMOVED, THE AIR GUN WAS BEING APPLIED TO TH E NUTS, THE BOLTS TURNED THROUGH AND CUT HIS RIGHT INDEX FINGER. STITCHES WERE REQUIRED.

WAS ON THE BACK OF XL5110 SCALER. WAS IN PROCESS OF ADDING OIL TO THE HYDRAULIC TANK AND WAS ATTEMPTING TO REMOVE THE PLUG WHEN WRENCH SLIPPED OFF PLUG INJURING FINGER.

WHILE TRYING TO PUNCH OUT CUT OFF BOLTS ON CRUSHER, MISSED HITTING FINGER WITH SLEDGE HAMMER.

WHILE OPERATING THE SCALE AT BECKLEY PLANT, WINDOW FOR TICKETING TO TRUCKS WAS DIFFICULT TO OPERATE CAUSING INJURY TO RIGHT ARM AND SHOULDER. PUT ON LIGHT DUTY.

EE INDICATED THAT HE WAS HAVING TROUBLE WITH NUMBNESS IN HIS LEFT HAND, THOUGHT IT COULD BE RELATED TO REPETITIVE MOTION FOR CRANE OPERATIONS. SURGERY CONDUCTED 3/3/00

UNDER #3 CONVEYOR CUTTING OLD TRESTLE OUT TO BE REPLACED, WELD BROKE AND STEEL PIECE FELL ON FINGER.

EE WAS HELPING TO A TRK LOAD OF BEAMS FOR THE CANOPY OUTSIDE OF THE MINE OPENINGS IN THE PARKING LOT. WHILE HOLDING THE WOOD, HE FELT POPPING &PAIN IN HIS LOWER RIGHT BACK

PLANT OPERATOR HAD SHUT DOWN THE PLANT AT THE END OF THE SHIFT & WHILE PERFORMING CLEAN-UP ACTIVITIES, SUFFERED A HEART ATTACK

EE ATTEMPTED TO REPLACE KNOCKOUT IS DISCONNECT BOX. CONTACT WAS MADE BETWEEN TOOL AND ENERGIZED CIRCUIT.L ELECTRICAL ARC WAS CREATED.

EE ATTEMPTED TO REPLACE KNOCKOUT IN DISCONNECT BOX. CONTACT WAS MADE BETWEEN TOOL AND ENERGIZED CIRVCUIT. ELECTRIVCAL ARC WAS CREATED.

INSTALLING A NEW PIPE FOR THE POND PUMP AT POND N HOOKING UP PIPE TO CRANE, STEPPED ON A ROCK & SLIPPED, TWISTING THE LEFT ANKLE

PNEUMOCONIOSIS.

WHILE EMPLOYEE WAS ON TOP OF GRIZZLY POUNDING ROCKS OUT OF GRIZZLY WITH A #12 SLEDGE HAMMER, A PIECE OF ROCK BROKE AWAY, FLEW AND HIT EMPLOYEE IN THE RIGHT EYE UNDER HIS SAFETY GLASSES.

WHILE APPROACHING HOPPER TRAILING ARM BROKE OFF THE EUCLID CAUSING TRK TO DROP & SHOCKING THE OPERATOR

EMPLOYEE WAS CROUCHED DOWN ON 3A CATWALK TIGHTENING BELT CLIP IN 55' BELT. HE WAS USING A WRENCHON THE LOWER SIDE OF THE BELT AND A RATCHET ON THE TOP SIDE OF THE CLIP. SOCKET SLIPPED OFF NUT AND EMPLOYEE FELL BACKWARD.

EE WAS BURNING AT GRIZZLEY AND AT OLD HB7 FUEL TANK IN UPPER YARD. HE BELIVES THAT WHILE USING A BAND SAW TO CUT THE PIPE OFF THE FUEL TANK. A STEEL PARTICLE MAY HAVE ENTERED HIS EYE. HE DID N OT NOTICE IT AT THE TIME BUT CANNOT ACCOUNT FOR ANY OTHER EXPOSURE.

AS EE WAS PUNCHING INTO WORK, HE STEPPED ON BOTTOM STEP WITH HIS ARCH/HEEL ON EDGE OF STEP AND HE FELT PAIN OR CRAMP IN LEFT FOOT.

INSIDE HAZEMAG CRUSHER TAPPING ON BLOW BAR KEEPERS WITH SLEDGE HAMMER. WHILE HITTING WITH THE SLEDGE, HE FELT PAIN IN HIS NECK.

WAS ON SCALER WHICH WAS PARKED IN S1, WHILE CLEANING THE WINDOWS ON THE SCALER, HE SLIPPED AND FELL, CUTTING HIS LOWER RIGHT LEG ON THE CORNER OF THE CATWALK.

WELDER CUT FOREFINGER FIRST JOINT LEFT HAND WHILE INSERTING A BOLT INTO METAL PLATE SHARP EDGE OF METAL CUT FINGER REPORTED TO DR IMMEDICARE CRESCENT ROAD BECKELY 7 STITCHES TO CLOSECUT

AFTER MECHANIC AND DRILLER INSTALLED TWO NEW STEELS IN CAROUSELL ON DRILL, MAST WAS RAISED INPREPARATION TO COUPLE LEAD STEEL TO DTH HAMMER. STEEL SUSPENDED FROM ROTATION MOTOR, UNCOUPLED AND DROPPED FIVE FEET. IT STRUCK MECHANICS RIGHTRING FINGER TIP WITH CRUSHING FORCE.

WHILE HELPING WELDER, DIRT BLEW INTO LEFT EYE. EE WAS WEARING SAFETY GLASSES.

REPLACING CUTTING EDGE ON LOADER,, WAS AT FRONT BOTTOM OF BUCKET,USING AIR GUN TO REMOVE BOLT TRIED TO PUSH BOLT UP IN SLOT, BOLT SPUN & CAUGHT LEFT INDEX FINGER

EMPLOYEE WAS STANDING BESIDE CRUSHER HOLDING SPUD WRENCH. WRENCH HIT BY OTHER EMPLOYEE AND PINCHED HIS HAND BETWEEN WRENCH AND TOP SHELL OF

WAS WORKING AS DECKHAND FOR MV CHIPPER MOVING TARRTOWN BARGES/HOIST BOAT TO SCHENLEY. SUFFERED PRE-EXISTING CONDITION TO AN OLD INJURY OF LAST YEAR TO HIS WRIST.

EE WAS DISMOUNTNG HOIST BOAT #4 TO CREW CHANGE BOAT. WHILE STEPPING FROM THE SEAT TO THE DECK OF THE BOAT, EE TWISTED LEFT KNEE

WAS LOADING PIPE INTO HIGH LIFT. WHILE LOADING PIPE, KNOCKED DIRT OUT OF PIPE, PIPE SLIPPED AND FELL ON LEFT FOOT.

FILLING HOLES WITH ANFO. ANFO POT WENT EMPTY. WHILE PULLING HOSE OUT, THE HOSE STRUCK HIM IN THE RIGHT KNEE.

WHILE LOADING 35"X30"X1/2 STEEL PLATE ON THE WELD TRUCK, EE PULLED MUSCLE IN RIGHT ARM.

EE WAS REPLACING MAIN HINGE PIN ON JAW BOWL OF #1 BUCKET. PIN CAME OUT AND TWISTED BUCKET OUT OF ALIGNMENT. BUCKET WAS CHAINED TO GRIZZLY AND TRIED TO OPEN/CLOSE TO REINSERT PIN. IT WAS FOUND A 4" SEAMLESS TUBE(1" WALL THICKNESS) WAS BENT SPRINGING BUCKET. AS EE CUT TUBE IN HALF ON ONE SIDE, HE GOT ON OTHER SIDE & CUT CLEAN THROUGH. TUBE SPRANG BACK 6-8" HITTING EE ON LEFT RIB CAGE

CHANGING SCREENS WHILE THROWING SCREEN OFF DECK SCREEN CAUGHT ON GLOVE PULLING WRIST

WHILE SHOVELING, HE SUFFERED SOME PAIN, BUT CONTINUED TO SHOVEL.

UNDERNEATH 50 CRUSHER BESIDE #3 BELT ON CONVEYORHOSING CONVEYOR. WAS PULLING WATER HOSE FURTHER BACK TO REACH THE TAIL PULLEY, STEPPED OVER PIPEBEARING, SLIPPED ON SOME MUD AND GRABBED HOLD OF SIDE WALL TO KEEP FROM FALLING. UNHEALED PRIOR NON-OCCUPATIONAL INJURY (LACERATION REOPENED)

WHILE ON DECK LEVEL OF DREDGE, WAS LIFTING 50# SPOOL OF ROPE INTO RACK. WAS WEARING GLOVES AS HE WAS REACHING WITH SPOOL, SLEAVE GOT CAUGHT ON BRACKET. SPOOL SLIPPED OUT OF HIS HAND AND PINCHED RIGHT THUMB BETWEEN BRACKET & PIPE HOLDISPOOL

CATWALK ON #2 HAED PULLEY - MOVING OLD MOTOR AWAY FROM HANDRAIL SO IT COULD BE LIFTED DOWN. SET ONE END OF MOTOR DOWN AND CAUGHT TIP OF FINGER ON TOE GUARD.

HE WAS IN THE WELDING SHOP WELDING ON 988 BUCKET AND WAS KNEELING DOWN ON THE FLOOR. WHEN DOING THIS, THERE WAS A WELDING ROD ON THE FLOOR BETWEEN HIS KNEE AND FLOOR. THIS INJURY BECAME REPORTABLE ON 7-28-99 DUE TO SURGERY AND BEGINNING OF LOST TIME.

EE WAS CROSSING OVER MAIN WATER LINE AT FEED END OF #1 CONVEYOR. HE WAS CARRYING RETURN ROLLER TO #8 CONVEYOR TO REPLACE IT. EE WENT TO STEP OVER 12" MAIN WATER LINE AND SLIPPED ON SAND AND GR AVEL ON DECK.

WHILE LIFTING SHEAVE UP TO SCREEN, IT SLIPPED OUT OF HIS HANDS AND LANDED ON TOP OF LEFT FOOT.

HAD TO TRIM HOSE WITH KNIFE. WHEN HE CUT HOSE, HOSE FELL CAUSING EE TO FALL FORWARD. WHILE TRYING TO CATCH HIMSELF, KNIFE SLIPPED AND CUT LEFT ARM.

TWISTED WRONG WHILE TYPING BARGE.

EE WAS WORKING ALONG HAUL ROAD LAYING PIPE FOR NEW WATER PUMP. WHILE WALKING ON UNEVEN GROUND, KNEE POPPED.

WHILE ON SUPPLY BARGE CUTTING NYLON BANDS ON ROLL OF SKIRT RUBBER WITH UTILITY KNIFE, KNIFE SLIPPED ON NYLON BAND AND CUT HIS LEFT KNEE REQUIRING SIX STITCHES.

WHILE REPOSITIONING BECKET ASSEMBLY ON SPUD LINE, CAUGHT HAND BETWEEN SPUD & FRAME.

WAS AT SCREEN 3 CUTTING PIPE WHEN A HOT SPARK FLEW INTO EAR.

WHILE BETWEEN HIGHLIFT AND BUCKET FIXING A PIN, SWUNG THE HAMMER AND MISSED, HITTING FINGER.

DRIVE SHEAVE ON FEEDER SHAFT WAS BEING REMOVED. EMPLOYEE WAS HOLDING, WIGGLING, AND PULLING ON SHEAVE. WHEN IT CAME OFF END OF SHAFT, IT WAS TOO HEAVY TO SUPORT. IT DROPPED 12" WITH HIS RIGHT HAND UNDER IT. IT LANDED ON THE MOTOR SHEAVE ANDDELIVERED A CRUSHING BLOW TO HIS 2 FINGERS.

WHILE DRAGGING 30 HP MOTOR ACROSS THE DECK, MOTOR CAUGHT ON DECK AND EE ALMOST FELL DOWN PULLING HIS RIGHT SHOULDER.

WHILE CLEANING THE AREA AROUND TH EELECTRICAL SHED, BENDING AND TWISTING, THROWING ITEMS INTO THE HIGHLIFT BUCKET, INJURED BACK.