Buscar en el registro

A ROCK FELL HITITNG MAN ON LEG.

TECHNICIAN WAS REMOVING MOUNTING BOLTS ON A SWING TRANSMISSION WITH A 1" AIR IMPACT WRENCH. THE TECHNICIAN WA OPERATING THE TRIGGER ON THE IMPACT WITH THE PALM OF HIS HAND. WHEN THE BOLT BROKE LOOSE, THE IMPACT MOVED UPWARD, PINCHING THE FINGERS OF THE TECHINICIAN BETWEEN THE IMPACT WRENCH & THE EDGE OF A STEEL PLATE. THE RING FINGER ON HIS R HAND WAS LACERATED & REQUIRED SUTURES.

THE INJURED WAS GRINDING A PIECE OF METAL WHEN HE TILTED HIS HEAD BACK TO AVOID LOOSING HIS SAFETY GLASSES, WHICH CAUSED HIM TO LOSE HIS ATTENTION OF THE TASK. APPARENTLY HE LOST HIS GRIB OF T HE METAL AND PINCHED HIS 12 INDEX FINGER BETWEENTHE WHEEL AND THE TOOL REST.

EMPLOYEE CLAIMED HE WAS LOOSENING A NUT OFF A U-BOLT OF REAR SPRING ASSEMBLY. HIS LEFT 5TH DIGIT FINGER GOT CAUGHT BETWEEN THE FLOOR AND THE HANDLE OF THE IMPACT WRENCH.

EE WAS HELPING COWORKERS ATTACH A HOIST CABLE END TO A HOIST DRUM LUCKER CLAMP ASSEMBLY USING AN ELECTRIC TUGGER. AS THE HOIST CABLE END STARTEDUP INTO THE LUCKER CLAMP, EE INADVERTENELY PLACE D HIS RIGHT HAND ON THE TUGGER CABLE CATCHING THE DISTAL PORTION OF THE LAST 3 FINGERS ON HIS RIGHT HAND BETWEEN THE SHEAVE WHEEL AND 9/16" CABLE. INJURY RESULTED IN AVULSION TO DISTAL PORTI

EE WAS PUTTING A ROOF BOLT IN THE HOLE WHEN THE EXPANDER CAUGHT SOMETHING CAUSING ROOF BOLT PLATE TO HIT MAN ON LEFT TEMPLE.

INJURED CLAIMED THAT HE WELDED THE DOG AND INSTALLED THE WEDGE. WHEN HE REALIZED THE AMPERAGE WAS TOO HIGH, HE WENT DOWN THE LADDER TO RESET TO LOWER AMPERAGE. WHEN HE WAS CLIMBING BACK UP THE LADDER, THE DOG BROKE OFF UNDER PRESSURE HITTING HIS UPPER LIP.

A ROCK FELL HITTING MAN ON RIGHT FOREARM.

MECHANIC WAS REMOVING THE BORING MACHINE WHEN THE POWER HEAD SWUNG AROUND AND HIT HIMIN THE TWO FRONT TEETH.

THE INJURED HAD HIS LEFT HAND ON OR NEAR THE PULLDOWN CHAIN ON 802 DRILL WHEN IT WAS STARTED UP. HIS 4 AND 5 FINGERS WERE CAUGHT BETWEEN THE CHAIN AND SPROCKET, CUTTING THOSE FINGERS.

EE STATED WHILE WATCHING A ROCK COMING UNDER THE SHEAR A PIECE CAME OUT OF THE PANLINE AND STRUCK HIM UNDER THE RIGHT EYE.

EE STATED HE BUMPED THE TOP OF HIS RIGHT HAND AGAINST T6 BOLTER FRAME WHILE INSERTING THE WRENCH INTO T6 CHUCK OF THE BOLTER. *REPORTED LATE [1/2/98] STARTED MISSING WORK ON 1/3/98.

EE STATED THAT HE WAS TRAMMING THE GALIS ROOF DRILL INTO POSITION TO INSTALL A ROOF BOLT. WHILE TRAMMING THE MACHINERY BACKWARDS HE CAUGHT HIS LEGE BETWEEN ROOF DRILL AND RIB.

EE , OTHER, ANOTHER WERE STANDING ON TOP OF 2 CENTIFUGAL DRYER. THE DRAYER WAS DOWN. THEY WERE BY PASSING THE UNIT REMOVING THE SWING CHUTES WITH A HOIST. WHEN THE HOIST WAS REMOVED, THE WEIGH T OF THE CHUTE CAUSED EE TO LOOSE HIS FOOTING. HE FELL FIVE FEET TO THE PLANT FLOOR, HITTING HIS LEFT LEG ON A VIBRATION MOTOR. THIS RESULTION IN A FRACTURE TO THE LOWER LEFT ELG.

EMPLOYEE WAS LOWERING CANOPY OFF ROOF BOLTER. RIGHT THUMB WAS CAUGHT BETWEEN 1ST AND 2ND STAGE OF JACK.

EE STATED THAT HE WAS PULLING IN JACKS T BANK PUSH THE FACE LINE. HE WAS STANDING IN SPAD NO 100 AND PULLING JACK NO 101 AND THE PIN THAT CONNECTS 101 RELAY BARD TO THE PAN LINE CAME OUT AN D HIT HIS RIGHT LOWER LEG/

EE STATED HE HAD AUTOMATICALLY STARTED N0 25 SHIELD TO RUN IN WHEN HE STEPPED BACK INTO NO 25 SHIELD AS IT WAS PULLLING IN AND THE JACK FOOT STRUCK HIS LEFT LEG.

EMPLOYEE STATED HE WAS DIGGING A DRAINAGE DITCH AND THE OUTSIDE OF THE EMBANKMENT GAVE WAY CAUSING THE 240 HOE TO SLIDE OFF OF THE HILL.

MAN WAS WORKING ON LONGWALL SHIELD AND INADVERTAINTLY LEFT LELG PRESSURIZED. AS HE REMOVED A STAPLE, A PLUG BLEW OUT AND EMULSION SPEWED OUT UNDER PRESSURE.

EMPLOYEE STATED HE WAS OPERATING THE SHEAR WHEN HE RAN INTO A SHIELD AND FELT A PAIN IN BACK.

USING A WIRE WHEEL ON A GRINDER, CLEANING THE RIM BASE. SAFETY GLASSES AND FACE SHIELD WERE IN USE AT TIME OF THE ACCIDENT.

EE STATES THAT WHILE ROOF BOLTING, HE BENT A ROOF BOLT DURING INSTALLATION AND BOLT HIT HIS CHIN CAUSING CUT REQUIRING SUTURES.

EE STATED HE WAS DRILLING THE TOP--A PIECE OF ROCK APPROX. 12" ROUND BROKE LOOSE (DRILLED THROUGH), CAME DOWN STEEL. THE EE TURNED HIS HEAD AND WAS CUT BYT THE ROCK ON THE BACK OF HIS HEAD.

EE DROVE #90 DIOR CATDOZER OFF THE EDGE OF COAL THIS RESULTED IN THE DOZER DROPPING 12 FT VERTICALLY. THE DOZER CAME TO REST ONT HE BLADE, EE WAS TRHOWN FORWARD HITTING HIS HEAD AND RIGHT ELBO W. DARKNESS & DISTRACTIONS PREVENTED HIM FROM SEEING THE DROP OFF. SUTURES WERE REQUIRED

EE STATED THAT HE WAS ROOF BOLTING WHEN HE LOST SUCTION ON DRILL, WHILE PLACING HIS HAND OVER DRILL STEEL HOLE THE DRILL STEEL FELLOUT STRIING HIM ON THE FINGER.

REMOVING BOLTS ON RADIATOR USING A 1/2" IMPACT WRENCH WITH A WOBBLE SOCKET. THE PIN CAME OUT OF THE WOBBLE SOCKET WHILE CATCHING EMPLOYEE'S HAND. THE HAND REQUIRED STITCHES.

EE COMPLAINED OF DISCOMFORT IN NECK AND LOW BACK AT THE BEGINING OF HIS SHIFT WHILE PUSHING COAL WITH DOZER ON COAL STOCKPILE. HE FINISHED HIS DSHIFT AND GAVE NO OTHER INDICATION HIS CONDITION HAD WORSENED.

EMPLOYEE STATED HE EANED A ROOF JACK AGAINS TRIB TO ALLOW CLEARANCE FOR EQUIPMENT MOVE. ABOUT 1 MINUTES HE TOLD SUPERVISOR THAT HE STARTED TO FEL A PAIN ON THE RIGHT SIDE OF CHEST.

EMPLOYEE WAS PUTITNG AUGER IN TOP. HE FLINCHED AND AUGER CAUGHT EDGE OF HOLE AND SPRUNG BACK HITTING HIS HAND. EMPLOYEE WAS EXAMINED AND RELEASED TO RETURN TO WORK, HAND CONTINUED TO HURT AND HE WENT TO ANOTHER DR. THAT FOUND A CHIP.

EE STATED HE WAS USING RUBBER GLOVES TO HELP BOLT TOP. WHEN HE GRABBED THE ROTATING STUCK DRILL STEEL THE GLOVE STUCK TWISTING HIS LEFT HAND AND PULLED HIS RING INTO HIS LEFT INDEX FINGER RESULTING IN A CUT SUTURED.

EE ATTEMPTED TO MANUEVER A 446B CAT BACKHOE DOWNA 1 TO 1 SLOPE, TIPPING IT OVER ON ITS SIDE. EE RECD A TORN MUSCLE IN THE GROIN/HIP AREA.

EMP STATED THAT HE WAS ROOF BOLTING WHEN THE VENTILATION FELL DOWN STRIKING HIM ON THE RIGHT SHOULDER.

A PIECE OF ROCK HIT THE ROTATING POT ON THE ROOFBOLTER AND FLEW BACK HITTING EMP ON FOREHEAD.

EE STATED HE WAS OPERATING SCOOP AND WAS NOT AWARE SOMEONE LEFT A PIECE OF DRILL STEEL ON SCOOP.THE DRILL STEEL SLIPPED OFF SCOOP CAUGHT RIB AND FLIPPED BACK AND HIT HIM OVER EYE RESUTLING IN SUTURES.

THE INJURED WAS GRINDING INSIDE A BORE WHEN THE ROATING DISC CONTRACTED THE EDGE. IT THREW THE GRINDER TOWARDS HIM. THE DISC CONTACTED HIS NECK CAUSIN GA SUPERFICIAL CUT.

EMPLOYEE REPORTED THAT HE WAS USIGN TH EOVERHEAD HOIST IN SHOP TO POSITION A PIECE OF METAL ON A RAILROAD CAR. HOIST CONTACTED OVERHEAD HEATER, KNOCKIGN GUARD OFF. GUARD FELL STRIKING HIM ON HEAD.

SEVERAL CUTS MADE IN SPPORT STRUCTURE. INJURIED EE WAS POSTIONED UNDER METAC, WHEN STRUCTURE FAILED FALLING AGAISNT EE. INJURING SPINE.

EE STATED THAT HE WAS TRAMMING A LOADING MACHINE OVEWR UNEVEN BOTTOM WHEN THE MACHINE DROPPED IN LOW PLACE JAMMING HIS LOWER BACK..

EE WAS AIR ARCHING BETWEEN TRACK PADS ON AN ELECTRIC SHOVEL. WHILE MOVING FROM ONE PAD TO ANOTHER AND ON HIS KNEES HE SAT THE STINGER DOWN STRUCK HIS KNEE AGAINST THE HOT CARBON ROD. THE ROD P ENETRATED HIS KNEE WITH A 3/4 INCH PUNCTURED WOUND.

VICTIM WAS OPERATING ROOF BOLTER IN FACE AREA, DRAW ROCK FELL STRIKING HIS LEFT HAND, RESULTING IN A SMALL LACERATION REQUIRING SUTURES.

EE STATED HE HAS STOPPED GRINDING; HE RELEASED HIS LEFT HAND & STARTED TO RAISE UP. THE GRINDER WAS COASTING, MOVED TO THE LEFT & CAUGHT HIS PANTS LEG & PULLED THE DISC ON THE LEG RESULTING IN A CUT.

EE STATED THAT HE RECEIVED A FLASH BURN TO HIS WRIST WHILE USING ANCLECTRIC CHAIN SAW. HE RETURNED TO HIS REGULAR JOB THE NEXT SHIFT. LATER HE BEGAN MISSING TIME DUE TO REASONS THOUGHT TO BE O THER THEN INJURY RELATED. WE WERE NOTIFIED BY WORKERS COMPENSATION THAT THE EE NOW CLAIMS THE TIME OFF WAS DUE TO THE INJURY. THIS CLAIM IS BEING QUESTIONED. LATE REPORTED.

INJURED WAS ROLLING OUT A POWER CABLE FROM A CABLE REELER WITH A LOG-SKIDDER WHEN HE WAS INJURED HE PLACED HIS (R) HAND ON A HANDHOLD WHICH WAS LOCATED NEXT TO THE OPEN CAB DOOR. THE DOOR SLAM MED AND CLOSED AGAINST HIS (R) SMALL FINGER.

EE STATED HE WAS INSTALLING ROOF BOLT WHEN A PIECE OF MINE ROOF FELL & STRUCK HIM

EMPLOYEE HAD POSITIONED HIMSELF ASIDE FROM THE SHIEDL BEING USED TO PUSH TH EPANLINE ALTHOUGH HE WASN'T IN THE SHIELD, HE HAD RESTED HIS LEFT HAND ON THE RELAY BAR MECHANISM. WHEN THE RELAY BAR MOVED THE DOG BONE MOVED IN THE BRACKE CATCHING HIS TIP END OF THE LEFT LITTLE FINGER.

EE WAS CUTTING COAL TOWARD TAILPIECE WHEN THE SHEAR CABLE CAUGHT THE WASH-DOWN HOSE AND STRETCHED IT OUT UNTIL IT STRUCK EE IN THE RIGHT LOWER JAW RESULTING IN A CUT REQUIRING SUTURES.

VICTIM STATED: TRAMMING TRUSS BOLTER ALONG SUPPLY ENTRY, MACHINE SHIFTED SIDEWAYS CATCHING HIM BETWEEN COAL RIB AND MACHINE FRAME.

EMP REPORTED THAT HE WAS STANDING OUTSIDE THE CAB OF HIS DOZER WHEN HE WAS STRUCK BY A TREE LIMBWHEN ANOTHER DOZER APPROACHED TO ASSIST HIM. EMPS DOZER WAS HUNG UP IN MUD.

EMPLOYEE STATED HE WAS INSTALLING A BOLT IN FLY BOARD AND PLACED HIS HAND ON TH EPLATE TO ALIGN IT WITH THE BOARD WHE EH ACCIDENTALY HIT THE UP LEVER AND CAUGHT HIS FINGER BETWEEN THE PLATE AN D THE BOARD.

EE WASS ROOF BOLTING WHEN A ROCK FELL HITTING HIM ON THE LIP, CUTTING HIS LIP. "WORKING WITH STITCHES"