Buscar en el registro

Employee was cutting an old chute down in pieces and putting them on the ground when a sharp edge cut EE's finger.

Operating a jack hammer. *Employee said they must have done this here because they don't work at home.

EE said he was moving the kiln gun away from the kiln after shooting a ring out and slipped off diamond plate and hurt his pinky.

Employee was using a 4 in grinder

EE working on bolting down the symonds crusher motor at the finish plant holding the bolt on the bottom and turning the top with a impact wrench the wrench turned and jammed his left thumb into the frame.

Employee was cutting a 2x4 with a skill saw when the guard stuck up.

Employee was cleaning the threads on a 1/4" pipe nipple 6" long when the bench mounted grinder wire wheel caught his thumb. He said that if he was wearing his gloves he would be ok. (Note clearing on rest was good at this time.)

Employee was operating a band saw, performing maintenance operations on a water line. Employee's hand slipped under cutting blade. Minor cut to left thumb requiring sutures.

EE working near welder, accidentally arc flashed in eyes. EE went to doctor that evening. Received drops & ointment for flash burn.

EMPLOYEE WAS OPERATING A BACKHOE TRACTOR TO UNBRIDGE THE HANGUP IN THE FEEDER CHUTE TO THE IMPACT CRUSHER. A SMALL PIECE OF SLATE WAS EJECTED FROM THE CRUSHER HITTING THE EMPLOYEE IN THE MOUTH.

EE REMOVING BOLTS ON CRUSHER WITH AIR POWERED RATCHET. AIR HOSE (3/4"ID) FAILED COMING LOOSE BY FITTING-CAUSING HOSE TO WHIP AROUND AND BLOW DUST INTO EE'S EYES & HITTING EE'S HEAD BY RIGHT EA R. EE WAS WEARING HARD HAT & SAFETY GLASSES WHEN HOSE FAILED-HAT & GLASSES KNOCKED OFF.

WORKING ON TOP OF KILN GRINDING SURFACE TO BE WELDED, HITTING LEFT LEG WITH GRINDER WHEEL, REQUIRED 7 STITCHES.

ATTEMPTING TO UNPLUG THE BALL MILL WHEN COAL DUST IGNITED CAUSING A FLASH FIRE.

EE WAS HOLDING PIECE OF CHUTE THAT A WELDER WAS TACK WELDING, INADVERTANTLY RECEIVED WELDING FLASH.

HE WAS WORKING INSIDE A KILN, USING A JACK HAMMER; HE SLIPPED ON LOOSE DEBRIS AND HIT HIS LEFT ELBOW AGAINST KILN REFRACTORY.

EE REPORTED TO HIS WORK STATION (KILN FLOOR) AT THE BEGINNING OF HIS SHIFT (1600-2400). ENROUTE TO HIS WORKSTATION, IN FRONT OF THE KILNS HE BREATHER IN SULPHUR GAS. THROUGH THE QUANTITY WAS S MALL, HE REQUESTED AND WAS GIVEN PERMISSION TO GO TO A MEDICAL DOCTOR.

EMPLOYEE WAS CLEANING A ROCK JAM BENEATH THE JAW CRUAHER WHEN A STONE FELL AND STRUCK HIM ON THE TOP OF THE LEFT HAND.

EMP WAS USING AN ELECTRIC POWERED HAND DRILL TO DRILL HOLE IN PIECE OF METAL. PIECE OF METAL WASSECURED IN BENCH VISE. DRILL BIT SEIZED IN THE METAL, TRANSFERRING DRILL TORQUE TO DRILL. EMPS HAND WAS IN DRILL HANDLE AND WAS TWISTED.

STEAM GINNY HOSE HAD A HOLE IN IT. EE STOOD ON HOSE TRYING TO STOP LEAK. THE HOT WATER PENITRATED HIS BOOT & BURNT HIS FOOT.

EE WAS ATTEMPTING TO FALL A TREE WITH A CHAIN SAW. HE LIFTED HIS LEG OVER A DOWNED LIMB AND THE SAW BLADE GRAZED HIS LEFT THIGH. THE RESULT WAS A CUT REQUIRING 26 STITCHES TO CLOSE.

EMPLOYEE WAS HOLDING METAL FOR WELDER TO TACK. SAFETY GLASSES WERE NOT TINTED ENOUGH FOR WELDING FLASH.

THE INJURED EMPLOYEE WAS USING A WELDER AND CUTTING RODS TO CUT REFRACTORY ANCHORS OFF THE SHELLOF THE KILN. THE ANCHOR HE WAS GOING TO CUT WAS AT THE 1 O CLOCK POSITION. HE POSITIONED HIS ROD WITH THE SHIELD UP THEN IN ONE MOTION FLIPPED HIS WELDING SHIELD DOWN OVER HIS FACE AND MOVED THE ROD TO CONTACT WITH THE METAL. THE SHIELD DIDN'T FLIP ALL THE WAY DOWN LEAVING HIS FACE

WHILE BREAKING OVERSIZE ROCK WITH A HYDARULIC HAMMER WHICH WAS LODGED IN THE JAW CRUSHER THE HAMMER STRUCK THE CABLE HANDRAIL SURROUNDING TH EPLATFORM PULLING THE CABLE AND ANGLE IRON CORNER P OST LOOSE. THE ANGLE IRON CORNER POST HIT THE OPERATOR ON HIS RIGHT CALF CAUSING A DEEP BRUISE TO THE CALF MUSCLE.

RAILROAD TRACKS BEING HOISTED TO MOVE, EE GUIDING TRACKS AS BEING MOVED, CHAIN SLIPPED CATCHING RIGHT INDEX FINGER BETWEEN TRACKS & CRUSHING IT.

EMPLOYEE WAS HOLDING A PIECE OF METAL FOR ANOTHER MAN TO WELD & A HOT PIECE OF SLAG METAL FELL DOWN INTO HIS SHOE BURNING HIS LEFT FOOT.

GRINDING CYLINDER HELD DOWN WITH EMERY WHEEL, WEARING WELDING SHIELD WITH CLEAR LENS BUT WIND BLEW METAL INTO LEFT EYE.

FOUR OR FIVE SLAB OF ROCK HAD CHOCKED THE TOP OF THE CRUSHER CLEARANCE HAD A BAR TYRING TO BREAK THEM LOOSE WHEN THE BAR WENT THROUGH AND HIT THE SPINING HEAD IN THE CRUSHER WHEN IT THREW THE B BAR TO ONE SIDE AND HIT HIM IN THE ARM.

ADDING AIR IN TIRE, TIRE RIM BROKE STRIKING RIGHT HAND AND LEG. BROKE NUCKLE OF MIDDLE FINGER ON RIGHT HAND WITH LACERATION, BRUISED RIGHT LEG, LEFT ARM & LEG. TIRE WAS INFLATED AND ON TRUCK.

WORKING IN #3 KILN USING A JACKHAMMER WHEN IT SLIPPED AND EMPLOYEE PINCHED THE LITTLE FINGER ON THE LEFT HAND BETWEEN THE HAMMER AND THE KILN SHELL MAKING A CONTUSION ON THE FINGER.

MAINTENANCE CREW WAS WORKING ON STACKING CONVEYOR TOWER IN FINISH DEPT THEY BRACED UP CONVEYOR & REMOVED TOWER TO REPLACE BAD STEEL LOAD ON CRANE BUMPED TOWER WHICH MADE WEIGHT SHIFT ON CONVEY OR CAUSING CONVEYOR TO COLLAPSE PINNING I NAME UNDER IT

WELDING IN HOPPER OVERHEAD. FIREBALL FELL INTO RIGHT EAR.

EMPLOYEE WAS USING POWER DRILL, MIXING COMPOUND AND ADDING HARDENER, WHEN IT SPLASHED ONTO PANTS ON GENITAL AREA, CAUSING BLISTERS AT LATER TIME.

LARGE CLINKER BALL FELL FROM HOPPER ONTO HIS HAND THAT WAS RESTING ON THE RAIL WHILE HE WATCHED THE SYSTEM. FINGERS WERE BROKEN AND HAND MASERATED WITH OPEN WOUND TO BACK OF HAND.

LOADER BUCKET ARM WAS PLACED IN PRESS TO INSTALL NEW BUSHINGS, DURING PRESSING STEEL BLOCK BROKE, ALLOWING THE ARM TO SLIP OUT. IT FELL TO THE FLOOR STRIKING VICTIMS RIGHT FOOT. X-RAYS SHOWED THE BIG TOE BROKEN IN THREE PLACES AND THE FIRST TOE BROKEN ONCE (1), SWELLING AND DISCOLORATION ALSO VISIBLE. RECEOVERING ESTIMATED AT 6-8 WEEKS.

WAS PULLING SLACK OUT OF CORD AND TORCH WAS LIT, BURNED LEFT OUTER FOREARM.

THE EMPLOYEE ATTEMPTED ACCELERATE THE STOPPING OF A PUMP DRIVE BY REACHING BEHIND THEW V-BELT GUARD AND HOLDING THE V-BELTS.THE EMPLOYEES 1 ST AND MIDDLE FINGERS WERE CAUGHT AND LACERATED BETW EEN THE V-BELTS AND SHEAVE BEFORE HE COULD PULL HIS AHND AWAY.

SITTING ON TOP 2F #8 KILN USING A LARGE 7 IN GRINDER COMPLETED GRINDING RELEASED TRIGGER ON GRINDER SIT IT DOWN ON KILN, WHEEL WAS STILL SPINING MOVEMENT OF WHEEL CAUSED GRINDER TO MOVE ALONG METAL UNTIL IT 7AME IN CONTACT WITH RT KNEE

MEN INSIDE KILN3IN DARK WELDING & FITTING RECD LFLASH BURNS TO EYES.

CONSTRUCTION ON3NEW FEED SHUT ON FINISH SIDE OF PLANT, WITH WELDING BEING DONE ALL DAY FROM DAYLIGHT UNTIL DARK. EYES WERE BURNED. IT WAS A CLOUDY DAY.

REPAIRING CONVE2OR SYSTEM WHEN SOMETHING GOT INTO LEFT EYE.

EMPLOYEE WAS PU8HING CLAY OUT OF DRUM ON #5 KILN BLADE CAUGHT ON DRUM TWISTING AROUND CATCHING EMPLOYEES GLOVED HAND CUTTING THUMB

USING ELECTRIC 2AND GRINDER IT BECAME INTANGLED IN CORD CAUSING GRINDER TO KICK HITTING HIM ON KNEE

DRILLING HOLE I3 COPPER PIPE, BROOK LOOSE FROM VICE CUTTING EDGE OF PIPE, ROUGH EDGE OF PIPE CUT LEFT HAND.

WELDING WELDERS3FLASH IN RIGHT EYE.

FINGER SLIPPED THROUGH GUARD & WAS NIPPED BY FAN.

WIRE BRUSH MOUNTED TO HAND GRINDER SLIPPED FROM OPERATORS HAND ABRADING HIS LEFT FOREARM ABRASION RESULTED IN SKIN INFECTION CLOSE QUARTERS CONTRUBUTED TO INJURY

EMPLOYEE DUMPED3CASTABLE FROM ELECTRIC CONCRETE MIXER CAUGHT THUMB BETWEEN MIXER BARREL AND FRAME OF MIXER

EE WAS WROKING REPAIRING TOWER CAUGHT HIS FINGER BETWEEN CBALES CUTTING THROUGH FINGER & NAIL.

EMPLOYEE WAS PLACING LUBRICANT ON OPEN GEAR FROM GREASE TUBE WHEN THE CUFF OF HIS GLOVE CAUGHT ON ONE OF THE GEARS. THIS FORCED HIS HAND AGAINST THE SECOND GEAR. DAMAGE TO THE BACK OF LEFT HAN D. EXTENT OF BONE AND TENDON DAMAGE UNDETERMINED AT THIS TIME.