Welding on jaw of crusher, after shift realized scratching in eye from foreign object due to welding.
Buscar en el registro
Cada lesión y muerte que la MSHA tiene registrada. Filtra por estado, año, sector, clasificación, experiencia o cualquier palabra clave de la narrativa del investigador.
- Incidentes totales
- 273,095
- De los cuales mortales
- 1,202
- Años en el registro
- 2000–2026
- Clasificaciones
- 20
Notifícame sobre esta búsqueda
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
22 registros coincidentes
Mostrando los 22Operator set down a grinder while cutting disk was still spinning, disk contacted the conveyor belt and jumped to the side. The spinning disk contacted the back of the operators hand and caused a laceration to the hand. Laceration required stiches to close.
Flash burn to eyes while doing maintenance.
Using a grinder to remove a bracket and at some point got a piece of steel in their eye.
Using air nozzle to blow away debris, small piece got into left eye.
Holding cutting edge bolt in place, impact wrench caused bolt to spin and cut index finger on employee.
Employee was loosening a bolt with impact wrench. Employee tried to hold bolt in place with hand, when bolt head spun and cut hand.
Operator was using a cut-off wheel and disk came apart. Small section struck operator in the stomach, requiring 4 stitches to close the laceration.
Operator was removing cutting edge from loader, holding bolt in place with left hand, bolt spun while using impact wrench, cutting operators left thumb.
Jarring motion of digging hard rock over the course of the day caused lower back pain.
EE alleges that while operating a backhoe scaling quarry highwall, his lower back began to hurt after being jarred when a large rock hit the bucket.
While replacing bracket using the air gun to spin off the bolts on top. Right was on the bottom holding the bolt up when the air gun jammed on, causing the bolt to spin resulting in a laceration on his finger.
While tightenting the blow bars on the impactor, the mall missed the shoe and struck the blow bar. A chip from the blow bar struck employee on the forearm.
Employee was directing other employee who was operating hammer to break rock in the jaw when the hammer slipped off the rock and lunged over crushing EE's hand.
As employee was grinding an air arced area a piece of debris went under his safety glasses and into his eye.
While attempting to fasten seeder to the three point hitch of the tractor the seeder dropped and wedged victims hand against the tractor arm. The incident at first blush was determined not to be reportable and then reconsidered.
EE WAS USING AN AIR HAMMER TO REMOVE MUD & CLAY OUT OF ROTO-LIFT ON THE ROLL PLANT WHEN HIS SHOULDER BECAME SORE-PAIN INCREASED OVERTIME, SO HE IS SEEKING TREATMENT. SOUGHT MEDICAL TREATMENT IN MAY.
THE WELDER PLACED THE HAND GRINDER THAT HE HAD BEEN USING ON THE FENDER OF THE TRAILER THAT HE WAS WORKING ON. APPARENTLY SOMETHING CAME OFF THE GRINDING WHEEL AND STRUCK HIS EYE FROM BEHIND T HE GLASSES.
EE WAS LOOKING DOWN IN BREAKER WHEN A ROCK FLEW OUT AND STRUCK HIS WRIST.
EMPLOYEE WAS SLOWLY MOVING DRILL INTO POSITION WHEN EITHER THE TRACK SLIPPED OFF ROCK OR TEETERED OFF ROCK. THE DRILL OVERTURNED AS A RESULT.
WHILE TORCHING HIS HAND CROSSED THE FLAME OF THE TORCH CAUSING BURN.
EE GOT DUST IN HIS EYES WHILE AIR ARCING.