Buscar en el registro

Employee was operating a dozer on a berm. Employee went to back up and backed over the side of the berm, turned dozer over and slid down the berm.

Employee was cutting a piece of steel in half with a torch. The cut piece fell and hit employee's left knee & thigh causing a contusion.

Employee was removing a pump drive & hydraulic pump from a drill rig when it fell on his right foot causing a fracture to right 2nd toe & contusion to right foot.

Employee stated as he turned to sit down in his CAT excavator he felt a pain in his lower back - right side

Employee was hit in the right ear by an air gun that flew out of a co-workers grasp causing laceration behind right ear requiring 5 stitches.

Employee was arc welding in a chute. That night he experienced a burning sensation in his eyes. He went to his local emergency room and was diagnosed for flash burn.

Employee was removing bolts on a surge tank cover using an air impact gun. When a bolt broke, the gun fell out of his right hand and struck his left index finger, causing a laceration and contusion.

EE was using a wire wheel grinder. He dropped the tool and the spinning wire brush struck him on his left thigh, causing an abrasion to his skin.

While helping mechanics with welding, employee sustained flash burns to both eyes.

Employee stated the use of a jackhammer and or climbing a ladder caused back strain.

Employee was grinding a weld on the revolving frame & because of the shape of the workspace, sparks were moving around the room. Hood was down with the dark lense up. The clear lense would not seat and a piece of steel entered the employee's (R) eye & became embedded. Employee return to regular duty. EMPLOYEE DID NOT GO TO DOCTOR FOR TREATMENT UNTIL 8/19/06.

Employee was cutting nuts with a torch to release bolts on a 980 loader cutting edge. As the nut was split, pressure on the nut caused it to release and it struck the worker in left knee.

EMPLOYEE WAS HOLDING UMBRELLA TO KEEP WIND OFF OF WHERE MECHANIC WAS WELDING AND HE LOOKED AT THE WELDING FLAME.

EMPLOYEE WAS CUTTING A PIECE OF STEEL WITH A TORCH. THE PIECE BROKE OFF & FELL, STRIKING EE'S FOOT. IT CAUSED A FRACTURE JUST ABOVE HIS RT. BIG TOE PAST THE STEEL TIP OF HIS BOOT.

EMPLOYEE WAS FEEDING CRUSHER WITH BACKHOE AND A SMALL PIECE OF ROCK HIT HIM IN RIGHT EYE.

EMPLOYEE WAS USING A TORCH TO LOOSEN A GREASE FITTING THAT HAD SEIZED UP. THE FITTING EXPLODED, SHOOTING OUT A BALL BEARING THAT BECAME IMBEDDED IN EMPLOPYEE'S LEFT FOREARM.

EMPLOYEE WAS OPERATING DOZER, BLADE HIT PIECE OF FLINT ROCK, JARRING MACHINE AND HIS LEFT HAND SLIPPED OFF LEVER & HIT DASH.

EMPLOYEE WAS SHOVELING AROUND CRUSHER WHEN A ROCK CAME OUT AND BOUNCED OFF TIRE, HITTING HIM IN THE PELVIS.

EE WAS USING A WIRE WHEEL GRINDER TO CLEAN THREADS ON A CRUSHER FRAME. THE GRINDER JUMPED BACK AND THE WIRE WHEEL BRUSHED EE'S FACE, CUASING A LACERATION TO HIS LEFT CHEEK.

EMPLOYEE WAS SHOVELING AROUND SCREEN PLANT AND SMALL ROCK FLEW OFF AND HIT HIM IN MIDDLE OF BACK.

EMPLOYEE WAS CHIPPING SLAG OFF A WELD WHEN A HOT PIECE OF SLAG GOT INTO HIS EYE. EMPLOYEE STATED HE WAS WEARING A FACE SHIELD.

EMPLOYEE WAS CUTTING DRAG CABLE WITH TORCH AND IT CAME BACK AND HIT HIM ACROSS LEFT ARM AND LEFT LEG.

WHILE CUTTING SPRING BOLTS, EMPLOYEE WAS STRUCK BY A SPRING BASE WHEN THE BOLT CAME OFF.

EE WAS CUTTING OFF A BOLT FROM A HEEL PLATE WHEN A SPARK GOT BEHIND HIS WELDING GOGGLES, BURNING HIS RIGHT EYE.

WHILE CUTTING A MANTLE WITH A TORCH, A PIECE OF HOT SLAG GOT INTO WELDER'S GLOVE, BURNING HIS HAND.

WHILE CUTTING METAL BLOCK OFF A TRUCK CAB, A PIECE OF HOT SLAG BURNT THRU EE'S PANT LEG AND DROPPED DOWN INTO HIS WORK BOOT CAUSING BURN TO ANKLE.

EE WAS SITTING AND WELDING A CHUTE LINER. WHEN HE TURNED TO WELD THE OTHER SIDE, HE FELT PAIN IN HIS BACK.

EE WAS OPERATING DRAGLINE, BRINGING LOADED BUCKET OUT OF WATER AND HOIST CABLE BROKE AND CAME INTO THE CAB HITTING EE ON HIS RT. LOWER LEG.

EMPLOYEE WAS WELDING NEXT TO ANOTHER WELDER. WHEN FIRST EMPLOYEE REMOVED HIS SHIELD HE WAS FLASHED BY ANOTHER WELDER, RECEIVING FLASH BURN TO BOTH EYES.

EMPLOYEE WAS REMOVING BOLTS FROM A D8 BLADE. HE WAS HOLDING THE BOLT HEAD WITH HIS LEFT HAND WHILE USING AN IMPACT WRENCH ON THE NUT. THE BOLT HEAD SPUN CUTTING EMPLOYEE'S LEFT PALM THROUGH WORK GLOVES, 4 STITCHES PLUS TETANUS SHOT.

WHILE CLOSING DOOR ON EXCAVATOR EMPLOYEE'S FINGER WAS CAUGHT BETWEEN DOOR AND DOOR FRAME, SMASHING FINGER.

WHILE OPERATING JACK HAMMER, THE EMPLOYEE'S HANDSLIPPED AND WAS CUT BY WIRE COUPLING HOLDING THEAIR HOSE TO THE JACK HAMMER.

EE WAS LYING ON HIS BACK USING A HAND GRINDER ONA STEEL TRACTOR BOLT WHEN A PIECE OF STEEL WENT UNDER HIS SAFETY GLASSES AND ENTERED HIS RIGHT EYE.

WHILE ATTACHING A CABLE TO A BUCKET, EMPLOYEE WAS STRUCK ON ARM WHEN BUCKET MOVED. EMPLOYEE HAD GIVEN THE WRONG HAND SIGNAL.

EE WAS SHOVELING ROCK AWAY FROM POWER SCREEN & A ROCK FLEW UP & STRUCK HIM IN HIS UPPER BACK BETWEEN HIS SHOULDER BLADES

WHILE REMOVING JACK HAMMER THAT WAS STUCK IN DIRT, EE PINCHED FINGER BETWEEN JACK HAMMER AND ANOTHER PIECE OF METAL.

EE WAS CUTTING STRIP LINERS WITH TORCH AS HE WASMOVING FROM ONE LINER TO ANOTHER HIS HOSE GOT CAUGHT ON PICKING EYE, RAKING TORCH ACROSS HIS ARM

EMPLOYEE WAS PUSHING LIMEROCK WITH BULLDOZER, ROCK GOT INTO HIS EYES, HE WASHED THEM OUT BUT ONE PIECE STAYED IN AND HAD TO HAVE IT TAKEN OUT NEXT DAY.

EE S HAND WAS CAUGHT BETWEEN DRILL ROD CAROUSEL AND DRILL ROD CUP.

WHILE WELDING, EE SAW FLAMES SHOOT OUT FROM HOSES.

WHILE MOVING PRIMARY SWING JAW, CABLE CAME LOOSE FROM BLOCK STRIKING EE ON RIGHT SIDE OF FACE CAUSING 3 STITCHES TO BE NEEDED.

AFTER WORK EMPLOYEE FELT PAIN IN RIGHT EYE.

ARM CAME IN CONTACT WITH HOT METAL LADDER THAT WAS BEING HEATED TO STRAIGHTEN.

EMPLOYEE WAS WELDING WHEN STOCK SLIPPED AND HIS THUMB PASSED THRU FLAME AND CAUSED BURN TO LEFT THUMB.

WHILE USING A HAND DRILL, DRILL CAUGHT EMPLOYEE'S GLOVE & TWISTED HAND.

EMPLOYEE INDICATED ON 9-9-93 THAT ON 9-7-93 HE EXPERIENCED BACK PAIN FROM BOUNCING AROUND WHILE OPERATING A DOZER.

HAD JUST FINISHED MOVING PORTABLE CRUSHER TO A NEW SPOT. HE WAS SUPPOSED TO PUT THE PIN BACK IN THE HITCH OF THE DOZER AFTER IT PULLED AWAY FROM THE CRUSHER. HIS RIGHT FOOT WAS UNDER THE TONGU E OF THE CRUSHER AS THE DOZER PULLED AWAY AND THE TONGUE OF THE PORTABLE CRUSHER FELL ON THE TOP PART OF HIS RIGHT FOOT. CONTUSIONS TO TOP PART OF RIGHT FOOT.

DRILL HELPERS FINGER WAS PINCHED BY A DRILL THE OPERA TOR ACCIDENTALLY PULLED A LEVER ACTIVING A HYDRAULIC CYLINDER FOR THE POWER BREAKOUT WRENCH

HE WAS USING AN AIR HAMMER TO CHISEL STEEL AT THE PRIMARY. HE WENT HOME AND CAME BACK THE NEXT DAY COMPLAINING ABOUT EYE IRRITATION. HE WAS WEARING SAFETY GLASSES.

EE WAS CUTTING UP SCRAP ON JUNK PIKE WITH AN ACETYLENE TORCH. A PIECE OF SHAFTING FROM THE PILE FELL ONTO THE TORCH HOSES AND PULLED THE TORCH FROM HIS GRASP. THE BURNING END OF THE TORCH WEN T BETWEEN HIS GLOVES AND HIS LEATHER JACKET NAD BURNED HIM ON HIS RIGHT INNER FOREARM NEAR HIS ELBOW. '