Buscar en el registro

LIFTING A 300 LB METAL BOX TO BE INSTALLED IN CHUTE WITH BACK HOE BUCKET & CHAIN. BOX WAS NOT HANGING STRAIGHT AFTER PICKING IT UP 3 FT., ATTEMPTED TO STRAIGHTEN BOX WHEN THE BACK END CAME LOO SE, BOX SLID DOWN LEG & STRUCK TOP OF RIGHT FOOT, BREAKING 1 BONE & CHIPPING ANOTHER.

EMPLOYEE WAS INJURED WHEN A LOAD ON A CRANE SWUNG IN HIS DIRECTION. AS HE QUICKLY MOVED OUT OF THE WAY, HE CAUGHT HSI FOREARM ON A METAL I BEAM RESULTING IN A LACERATION.

EE WAS LIFTING A 10" PIPE WITH A HOIST. THE DOG ON THE HOIST DID NOT GO INTO THE NOTCH AND RELEASED THE LEVER WHICH SPUN AROUND AND HIT EE IN THE ARM AND WRIST. EE WAS PRESCRIBED WITH AN ARM S LING.

EMPLOYEE WAS WELDING ON BARGE, HEARD HOSE LEAK AND FLIPPED UP HOOD TO SEE THAT HOSE WAS DETACHED FROM TORCH AND WAS ON FIRE. AS EMPLOYEE WENT TO SHUT OFF TANKS, IT WENT NEAR HIS EYE AND HE REC EIVED A MINOR BURN.

EMPLOYEE WAS SHARPENING DRILL BITS AT THE BIT GRINDING SHED. HE DROPPED A DRILL BIT AND WHEN HE BENT OVER TO PICK IT UP HE BUMPED INTO THE GRINDER RESULTING IN A LACERATION TO HIS RIGHT ARM WH ICH NEEDED 3 STITCHES.

EMPL PULLED DRILL STEEL TO CHECK THE BIT.THE COLLAR CAME UP WITH THE BIT,EMPL REACHED TO UNWEDGE THE COLLAR AND IT FELL PINCHING INDEX FINGER BETWEEN COLLAR AND DRILL TABLE.AN X-RAY REVEALED A FRACTURED LEFT INDEX FINGER.DR APPLIED TAPE TO THE FINGER AND ALLOWED EMPL TO RETURN TO WORK WITHOUT RESTRICTIONS.

A SHEET OF EXPANDED METAL WAS PROPPED UP TO GIVE CLEARANCE TO MAKE A CUT WHEN HE WENT THROUGH METAL THE ART PIECE FELL STRIKING HIS LEG. THE LACERATION REQUIRED STITCHES.

EMPLOYEE WAS HOLDING HOSE & TWISTED IT TO KEEP WATER FROM LEAKING WHILE PRIMING HOSE WHEN PUMP PUT INTO GEAR WATER HIT DISCHARG LINE & STRAIGHTENED IT OUT WHILE HE HELD IT CAUSING LACERATION TO HAND

ON 6=13-90 EMPLOYEE REPORTED THAT HE RECEIVED A MINOR BURNM WHEN SPARKS WENT INTO HIS RT EAR WHILE WELDING EMPLOYEE DID NOT REPORT THAT HE HAD BEEN EXAMINED BY A PHYSICIAN ON 10-22-90 A MEDICA L REPORT WAS OBTAINED FROM THE PHYSICAN INDICATITHAT THE BURN WAS SECOND DEGREE & IT HAD BEEN NECESSARY TO TREAT IT WITH ANTIBIOTICS EMPLOYEE WAS NEVER ON RESTRICTED WORK & LOST NO TIME THIS

EMPLOYEE WAS CUTTING SKIRT BOARD BRACKETS OFF A CONVEYOR WITH AN ACETYLENE TORCH. HOT SLAG FELL FROM THE BRACKET ONTO HIS KNEE.

EE WAS CUTTING TREES IN AN AREA TO BE STRIPPED FOR DREDGING WHEN HIS FOOT BECAME TANGLED IN UNDERGROUND VINES AND WHEN HE WENT TO MOVE HE TWISTED HIS LEFT KNEE. EE DID NOT NOTIFY SUPERVIOSR UN TIL 12-4-89.

EMPL WAS OPERATING FORD BACKHOE MACHINERY DURING SHIFT INSTALLING PIPELINE IN PIT AREA. AT END OF SHIFT HE WAS RETURNING BACKHOE TO REPAIR SHOP. WHILE HE WAS TRAVELING ON ONE OF PIT ROADS HE L OST CONTROL OF UNIT & DROVE IT INTO LAKE. HE WASABLE TO GET OUT & SWIM TO LAKES EDGE.

EMPL REMOVING BOLTS FROM HOUSTING USING AIR IMPACT WRENCH TO LOOSEN BOLTS.WRENCH SLIPPED AND FELL ON FINGER CUTTING IT.

WAS USING A TORCH TO CUT 5/16" BOLTS ON HOLD DOWN STRIPS ON URETHANE SCREENS IN A SAND BUCKET;AFTER CUTTING BOLTS,WITH GOGGLES OFF,TOOK CHIPPING HAMMER AND STARTED KNOCKING BOLTS OUT OF METAL ON SAND WHEEL SCREENS,A PIECE OF METAL OR FLAC HIT LEFT EYE.

WELDING DOING MAINT ON BARGE PIECE RUST GOT IN EYE CONT'D WORK HIS SHIFT HE WENT TO DR AFTER WORK HE RETURNED TO WORK NEXT DAY DID NOT LOSE ANY TIME.

EMPLOYEE WAS USING A PORTABLE GRINDER ON A HYDRAULIC CYLINDER

WHILE USING AN OXYGEN/ACET.TORCH INJURED FAILED TO USE GOGGLES WHICH RESULTED IN A FOREIGN BODY GOING AROUND HIS SAFETY GLASSES AND LODGING IN HIS EYE.THIS IS A DIREST VIOLATION OF COMPANY RUL ES.INJURED DID NOT REQUEST TREATMENT UNTIL TWO DAYS LATER.

WALKED DRILL ON ROCK MACHINE SLID ONTO FOOT.

INJURED EMPL WAS HELPING ANOTHER EMPL STEAM CLEAN DRAGLINE PARTS. HE THEN ASKED OTHER EMPL TO CLEAN HIS BOOT OFF USING STEM CLEANER. WHEN HE DID SOME OF THE HOT STEAM WENT INTO SIDE OF BOOT & CAUSED 2ND DEGREE BURN.

EMPLOYEE WAS WELDING ON HAMMER MILL WHEN WELDING ROD TOUCHED MILL BEFORE HE GOT HIS HOOD DOWN CAUSING CONJUNCTIVITIS TO RIGHT EYE

EMPLOYEE WAS SITTING DOWN GRINDING ON CRUSHER BOWL, WHEN A PIECE OF DUST (METAL) BECAME EMBEDDED IN HIS RIGHT EYE.

EMPLOYEE WAS WELDING CRUSHER RINGS AND WHEN HE WAS CHECKING THE WELDING POSTION WHILE THE MACHINE HE RECEIVED FLASH BURNS TO BOTH EYES.EYES WERE TREATED A SHOT GIVEN AND PAIN PRESCRIPTION WRIT TEN.

KNEELED DOWN INSIDE CRUSHER WELLDING.NOT SURE OF EXACT TIME OF INJURY.WHEN HE STOOD UP TO GET OUT OF CRUSHER AND WALK AROUND THE KNEE BECAME SWOLLEN AND PAINFUL.X-RAYED AND PAIN PRESCRIPTION G IVEN.

EMPLOYEE WAS SITTING DOWN AND WELDING ON A CRUSHER BASE MOST OF THE DAY AND FORM THE POSITION HE WAS HAVING TO TAKE TO WELD AND THE OTHER WELDERS AROUND HIM CAUSED EXCESSIVE WELDING FLASH.

INJURED WAS GRI3DING ON STEP-BEARING PLATE AND GOT METAL FRAGMENT IN LEFT EYE. THE PIECE WAS IMBEDDED AND REQUIRED INSTRUMENT REMOVEL.

INJURED EMPLOYE9 WAS INSTRUCTED TO WALK TO REAR OF DRAGLINE BY HIS OPERATOR AS HE DID MACHINE BEGAN TO MOVE BACKWARD & A LINK OF THE TRAVEL CHAIN BROKE OFF & STRUCK THE EMPLOYEE PASSING BY THE OPERATOR DID NO7 WAIT UNTIL EMPLOYEE WAS CLEAR OF THE TRAVEL CHAIN PRIOR TO MOVING DRAGLINE IN BBACKWARD POSITION

DRILLER WAS I N3THE PROCESS OF SETTING UP THE BOOM OF INGERSOL T-4 DRILL WHEN THE RIGHT REAR OUTRIGGER BROKE THROUGH THE ROCK AND SANK INTO A MUD CUTTER THE DRILL FELL OVER ONTO THE EIGHT SIDE CAUSING THE OP9RATOR TO BREAK A RIB WHICH DAMAGED THE SPLEEN REQUIRING SURGICIAL REMOVAL.

THE EMPLOYEE WA8 PLACING A BOLT INTO POSITION TO BE HEATED AND BENT. ANOTHER EMPLOYEE WAS HOLDING THE TORCH. WHEN THE INJURED EMPLOYEE LEANED OVER TO PLACE THE BOLT INTO THE NUT, HIS ARM PASSE D TOO CLOSE TO 7HE TORCH. HE HAS 1ST AND 2ND DEGREE BURNS.

EMPLOYEE WAS WO9KING ON A CRUSHER SEALING RING TRYING TO REMOVE PLUNGERS THERE WAS ANOTHER EMPLOYEE WORKING BEHIND ON THE CRUSHER HEAD ASSEMBLY I.NAME WAS NOT AWARE THE WELDING FLASH WAS AFFEC TING HIS EYES L5TER THAT NIGHT HE RECEIVED TREATMENT AT THE LOCAL HOSPITAL ER EYES WERE WASHED OUT AND PATCHED

THE EMPLOYEE WA8 USING A HAND HELD GRINDER TO CUT A DRAGLINE FRICTION BAND. THE GRINDER BECAME CAUGHT ON THE BAND AND KICKED BACK STRICKING IS LEFT WRIST.

THE STOP ON THE3POWER SAW DID NOT HOLD THE MIDDLE SETTING AND SLIPPED MASHING EMPLOYEES FINGER BETWEEN THE STOP AND STOP SETTING THE BONE IN THE TIP OF THE 2ND FINGER ON THE RT HAND WAS CHIPPE D THE FINGER NA3L WAS REMOVED AND THE FINGER REQUIRED STITCHES A PRESCRIPTION FOR PAIN AND AN ANTIBIOTIC WAS GIVEN TO THE EMPLOYEE

WHILE WAITING O3 CATWALK OF SECONDARY CRUSHER TO SIGHT PIECE OF METAL STONE CAME FROM CRUSHER STRIKING EMPLOYEE IN RIB AREA OF RIGHT SIDE. CAUSING BRUISED RIB.

EMPL REMOVING P3ECE OF STEEL OUT OF TRUCK WITH ENGINE PULLER.THE PULLER TWISTED -CYLINDER SLIPPED CATCHING EMPL HAND BETWEEN CYLINDER AND BRACE.

THE INJURED EMPLOYEE WAS STANDING IN THE AREA WHERE A CRANE WAS TO LIFT A SECTION OF EQUIPMENT FROM THE GROUND THE EMPLOYEE WAS NOT PAYING ATTENTION TO THE CRANES POSITION AT THE TIME WHEN TH E LIFTING SLINGS FELL FROM THE CRANE HOOK IT STRUCK HIS FACE CAUSING A LACERATION ON UPPER LIP IT WAS NOTED THAT THE SAFETY CLIP ON THE CRANE HOOK WAS NOT WORKING PROPERLY CAUSING THE SLINGS

CUTTING CATWALK OFF OF CONVEYOR WHEN IT SHIFTED AND FLIPPED OFF OF SIDE STRIKING VICTIM ON LEFT SIDE OF HEAD CUTTING LEFT EAR