Buscar en el registro

I.NAME OPERATING AIRJACK HAMMER-90 LB AND WHEN LIFTING IT HE STRAINED HIS BACK.

EMPLOYEE WAS LIFTING SACK WEIGHT (100LBS) AND PLACING IT ON A PALLET LAYING ON THE FLOOR.

EMPLOYEE WAS STANDING NEAR EDGE OF ORE IN RAILCAR, SHOVELING ORE DOWN, WHEN HE SLIPPED AND FELL ON HIS BACK.

MAINT. EMPLOYEE WAS TURNING HORIZONTAL DRIVE SHAFT WITH TURNING WHEEL AND TURN BAR (NOTE ELECTRICAL POWER TURNED OFF AND LOCKED OUT) OPERATOR WAS NOT WATCHING ROTATION OF WHEEL AND PINCHED FIN GER BETWEEN TURN BAR AND BEARING SUPPORT BASE

EMPLOYEE LIT TORCH AND WAS GOING TO CUT A BOLT OFF OF A PULLEY GUARD WHERE BELT WAS STRIPPED ON A STACKING CONVEYOR WHEN THE TORCH CAUGHT ON FIRE DUE TO A LEAKING VALVE. EMPLOYEE DROPPED TORUC FLAME WENT OUT AND HE PICKED TORCH UP AND TRIED TO IGNITE IT AGAIN. THE TORCH BLEW UP IN HIS NAME.

I.NAME WAS ASSISTING I.NAME IN CUTTING RUSTY BOLT THAT FASTENED 2 PIECES OF SAFETY GUARD ON THE TAIL PULLEY OF A CONVEYOR BELT WITH A BLOW TORCH THE TORCH THEN CAUGHT ON FIRE DUE TO GAS LEAK A ND I.NAME THREW THE TORCH TO THE GROUND THE FIRE EXTINGUISHER WHEN THE TORCH LANDED ON THE GROUND. I.NAME PICKED THE TORCH BACK UP AND WHEN HE TRIED TO IGNITE THE GAS THAT HAD LEAKED EXPLODED

EMPLOYEE CLAIMS HE WAS SWEEPING THE WAREHOUSE FLOOR WITH BROOM, WHEN H E CLAIMS HE SLIPPED AND FELL.

EMPLOYEE WAS WORKING MAINTENANCE WITH AIR IMPACT TOOL. HOSE ON SAID IMPACT TOOL CAME LOOSE FROM FITTING AND STRUCK EMPLOYEE ABOUT THE FACE AND RIGHT EYE.

EMP WAS WORKING ON BACK LOADING DOXK HE SLIPPED AND FELL OFF THE DOCK AND HURT HIS BACK

EMPLOYEE WAS PULLING JOURNAL FROM MILL FOOT PINCHED BETWEEN ROLL AND WORK PLATFORM BRUISED SIDE OF FOOT

STARTED UP 66IN MILL MILL STARTED TO RUMBLE WALKED UP STEP TO CORRECT PROBLEM CAT WALK GRADING WAS REMOVED WHERE EMPLOYEE FELL THROUGH WHICH IN TURN EMPLOYEE INJURED BACK OF HEAD AND NECK

WHILE USING A WRENCH TO LOOSEN NUTS ON DISCHARGE VALVE, THE WRENCH SLIPPED CAUSING THE HANDLE OF THE WRENCH TO STRIKE EMPLOYEE IN THE FACE

EMP WAS REMOVING PRODUCT FROM INSIDE OF 6" SUCTION LINE WHEN HIS FINGER WENT INTO UPPER AIRLOCK. SAFETY SWITCHES WERE OFF BUT AIRLOCK SAFETY SWITCH MALFUNCTIONED

EMPLOYEE DEVELOPED A RASH ON HIS BODY FROM THE CHEMICALS IN THE WAREHOUSE.

EMPLOYEE WAS PRYING ON BRASS BUSHING WITH PRY BAR, WHEN PRY BAR SLIPPED AND SMASHED EMPLOYEE FINGER.

EMPLOYEE WAS DOWN IN A RAILROAD CAR WHEN A SCREEN FELL DOWN ON HIS RIGHT FOOT.

CLEANING SOME METAL WITH A WIRE BRUSH AND A PIECE OF METAL FLEW UP INTO HIS RIGHT EYE.

EMPLOYEE WAS SWINGING A SLEDGE HAMMER AND DISLOCATED HIS RIBS.

REBAGGER STARTED, EMPLOYEE REACHED THROUGH BELT GUARD, GRABBED BELT AND STARTED THE MOTOR. THUMB ON RIGHT HAND WAS PULLED AROUND DRIVE PULLEY.

EMPLOYEE WAS CLEANING UNDER SCALE. HE WAS STANDING ON A SCALE BEAM, SLIPPED OFF AND LANDED ON RIGHT ANKLE.

CHEMICAL ASPIRATION PNEUMONIA

ANOTHER EMPLOYEE WAS DRIVING A FORKLIFT AND RAN OVER KENNYS FOOT.

SPRAINED LEFT WRIST WHILE MOVING BAGS OF GEL FROM THE CONVEYOR TO A PALLET.

JUMPED OFF A SCAFFOLDING DISLOCATED PATELLA

CUTTING AND GRINDING WITH TORCH.GOT METAL IN LEFT EYE.

HAMMERING CEMENT FORMS AND CHOP OF CONCRETE FLEW IN EAR.

FELL WALKING DOWN STAIRS

OPERATOR-LIFTED HEAVY OBJECT IN THE WRONG MANNER & STRRAINED BACK MUSCLES. OPERATOR HAS BEEN IN THE PAST TOLD TO WATCH THIS PROCEDURE.

OPERATOR WAS CUTTING MILL PARTS WITH A TORCH HE WAS ALSO CLEANING THE METAL WITH A WIRE BRUSH OPERATOR GOT A SMALL PIECE OF METAL IN HIS EYE

CLIMBING LADDER FROM PLATFORM TO CATWALK CRACKED SHIN OF LEFT LEG ON EDGE OF GRATING OF CATWALK RESULTING IN 3IN CUT THRU SKIN TO MUSCLE

CAUGHT FINGER IN A V-BELT WHILE ATTEMPTING TO MOVE IT BY HAND SUFFERED A CUT FINGER