Buscar en el registro

Employee slipped and fell while climbing back into EE's bulldozer

DRIVER WEIGHED AT THE SCALES FOR DELIVERY AND WAS OVERWEIGHT. DRIVER PULLED OFF TO OUR DUMP OFF BIN TO DUMP SOME MATERIAL BEFORE BEING WEIGHED AGAIN. WHILE CLIMBING DOWN TO UNLOCK TAILGATE, DRIVER SLIPPED ON STEPS AND TRIED TO CATCH SELF ON THE MUFFLER COVER. THE SHARP EDGES ON THE MUFFLER COVER CUT RIGHT RING AND MIDDLE FINGERS.

Employee hit knee on "C" clamp while being freed from material spillage. Employee also hit head on plant.

Employee was walking to car at the end of day when employee lost balance and fell.

Employee was getting bag out of Pickup truck. Employee stepped on tire to reach bag. Upon lowering back to the ground, the employees leg was injured.

While climbing down a ladder on the plant, the employee slipped and fell into the ladder on the right side.

Employee fell from a ladder on the plant at the remco 3000 crusher at the back-end.

After employee finished fueling the drill, employee was putting hoses away. While walking to the truck to hang the nozzle, employee tripped over track marks left in the ground from the drill.

Employee slipped on ice while climbing down from a loader. EE caught self with EE's arm and felt a pull in EE's shoulder.

Employee was climbing down a ladder after making repairs to a 992D Loader, when the ladder slipped out from underneath him causing him to fall. while falling he made contact with the tire and injured his back/neck.

Employee was installing a wear shield in the transfer box. While picking up the shield to bolt it in, the employee slipped bumping his elbow against the transfer box.

Employee was pulling the torque wrench while standing on a set of stairs. As the employee was pulling, hit weight shifted causing the stairs to slide. The employee's knee twisted to the right and his body fell to the left. His leg went forward and hit the frame of the truck.

The employee was pressure washing the caterpillar 325CL backhoe. The employee was standing on a step ladder to reach the boom area. The employee was approximately three feet off the ground. The employee leaned over the side of the step ladder, it then tipped over, causing the employee to fall to the ground.

I HAD TAKEN THE CRANE & BASKER TO THE #10 CONVEYOR TO REPLACE SOME BAD IDLERS. I POSITIONED AND SET UP TO MAKE A LIFT. THE REPAIR CREW WAS ALREADY WORKING ON THE ROLLERS TO BE REPLACED. AS I W AS STARTING TO LIFT AN EE IN THE BASKET, I SAW SOMETHING FALL INTO THE PILE OF SAND BELOW THE BELT. I IMMEDIATELY LOWERED THE BASKET TO THE GROUND & THE EE RAN TO CALL FOR HELP. I WENT TO SEE

EMPOLOYEE WAS DISMOUNTING FROM THE RIGHT SIDE OF DZ-37C. A D-7H CATERPILLER BULLDOZER, SUING THREE POINTS OF CONTACT. AS HE PLACED HIS RIGHT FOOT ON THE BLADE ARM STEP, HISS FOOT SLIPPED CAUS ING HIS RIGHT KNEE TO BE WEDGEED BETWEEN THE BLADE ARM AND THE TRACK FRAME.

EE WAS WALKING OUT OF THE OPERATOR'S CAB OF SH-17C, A KOBELCO K-975 FACE SHOVEL. HE CAUGHT HIS RT FOOT ON SOME MACHINE PARTS THAT WERE IN THE WALKWAY, TWISTING HIS RT KNEE.

EMPLOYEE WAS DISMOUNTING FROM THE CAB OF A K914 BACKHOE, USING THREE POINTS OF CONTACT. HE PLACED HIS LEFT FOOT ON A PILE OF LOOSE GRAVEL WHICH HAD BUILT UP AROUND THE TRACKS. AS HE PUT THE WE IGHT OF HIS BODY ON HIS LEFT FOOT, THE PILE GAVE WAY CAUSING HIS FOOT TO TURN OVER.

CLEANING FLOOR WHERE CHEMICAL HAD SPILLED ON FLOOR. PUTTING DOWN STAY DRY ABSORBENT. SLIPPED AND FELL ON RIGHT KNEE.

EMPLOYEE WAS INSPECTING INSTALLATION OF NEW TAIL PULLEY CONVEYOR WAS LOCKED OUT HE CLIMBED ONTO BELT TO GET A BETTER VIEW WHILE ON BELT HE SLIPPED CAUSING INJURY TO HIS KNEE

EMPLOYEE WAS CHECKING GREASE LEVEL IN GYRATOR CRUSHER. SOME GREASE GOT ON WORK PLATFORM. EMPLOYEE SLIPPED ON GREASE. TO KEEP FROM FALLING, HE PLACED A LOT OF STRESS ON LEGS, WHICH CAUSED HERNI A. AT THE TIME, EMPLOYEE REPORTED INJURY, BUT DECIDED NOT TO SEEK MEDICAL HELP. PAIN INTENSIFIED UNTIL 7-23-90 WHEN HE WENT TO CLINIC. LOST TIME BEGAN ON 7-27-90 WHEN EMPLOYEE WAS TOLD BY DOC

EMPL WAS DISMOUNTING FROM A KOBELCO K-975 SHOVEL HE SLIPPED ON AN OILY SURFACE HIS ARM STRUCK A SHARP PIECE OF METAL RESULTING IN A LACERATION

EMPLOYEE WAS GREASING PULLEY BEARINGS. WHILE MOVING TO ANOTHER LOCATION, HE SLIPPED AND FELL. GROUND WAS WET.

EMPLOYEE STEPPED ONTO A TRAILER WHICH HE WAS LOADING.HE SLIPPED AND HIT SHIN CAUSING A MONOR PUNCTURE WOUND.HE FAILED TO REPORT ACCIDENT OR SEEK FIRST AID.WOULD BECOME INFECTED.HE SOUGHT MEDIC AL ATTENTION ON 07-20-88.MANAGEMENT DID NOT BECOME AWARE OF PROBLEM UNTIL MEDICAL BILLS WERE RECEIVED.

EMPLOYEE WAS OPERATING A CAT D7E TO FEED PUG MILL.HYDRAULIC LINE BROKE CAUSING FIRE.EMPLOYEE FEARED DOZER WOULD EXPLODE AND JUMPED.EMPLOYEE IS OVERWEIGHT AND HAS A BAD LEG AS A RESULT OF EARLI ER AUTO ACCIDENT.

EMPLOYEE WAS CL3MBING HOME-MADE LADDER WHICH SHIFTED CAUSING HM TO LOSE BALANCE. IN CATCHING HIMSELF HE HURT SHOULDER. HE REPORTED ACCIDENT BUT ID NOT BELIEVE MEDICAL ATTENTION WAS NECESARY. O N 1- -88 EMPLOY9E REPORTED INCREASED PAIN. HE WAS TAKEN TO EMERGENCY MEDICAL FACILITY. EXAM MADE BUT NO TREATMENT GIVEN. PAIN DID NOT SUBSIDE. LOST TIME BEGAN ON 1-21-88.

EMPLOYEE WAS OP9RATING A CAT. 992A FRONT LOADER. HE STOPPED LOADER AND STEPPED ONTO ONE OF THE REAR, TIRES TO TALK TO A HAUL TRUCK OPERATOR. WHILE RETURNING TO THE LOADER CATWALK, HE TRIPPED O R SLIPPED AND S7RUCK HIS KNEE ON AN AREA THAT WAS INJURED YEARS AGO. NO LOST TIME WHEN ACCIDENT OCCURRED. LOST TIME WILL BEGIN ON 10-27-87 WHEN HE IS SCHEDULED FOR SURGERY TO REPAIR DAMAGED C

EMPLOYEE SLIPPE8 AND FELL WHILE DISMOUNTING EUCLID END DUMP.EMERGENCY ROOM PHYSICIAN SAID HE HAD A CONTUSION AND SENT HIM ABCK TO WROK.NEUROLOGICAL SYSTEMS BEGAN TO APPEAR A WEEK LATER.ADDITIO NAL VISIT TO DO7TOR-REVEALED PINCHED NERVE BETWEEN VERTEBRAE C-6 AND C-7.LOST TIME BEGAN ON 09-21-87.ACCIDENT ORIGINALLY CALSSIFIED AS "FIRST AID".

EMPLOYEE WAS SE7TING UP PORTABLE PLANT WHILE PUTTING PORTABLE BIN IN PLACE HE SLIPPED CATCHING HIS THUMB IN PORTABLE BIN WHICH RESULTED IN A BROKEN THUMB

I.NAME WAS OPER5TING A DRILL AND WALKING BACK TO THE SUPPLY TRUCK AND SLIPPED AND FELL. TRIED TO BREAK HIS FALL BY CATCHING HIMSELF AND BROKE HIS RIGHT WRIST DOING SO

CLEANING OFF BE5T AND TWISTED ANKLE.

GETTING OUT OF 5 DJ3 HAULAGE TRUCK AND SLIPPED ON THE STEP TWISTING HIS LEFT KNEE

I.NAME WAS UNPL6GGING THE BIN FEED FOR A CRUSHER WHEN HE LOST HIS BALANCE. IN THE PROCESS OF CATCHING HIMSELF HE TWISTED HIS LOWER BACK

I.NAME WAS GETTING OUT OF THE CRANE AND STEPPED ON THE TRACK AND SLIPPED AND FELL. HE WENT TO THE DOCTOR ON 10-8-85 AND WAS TOLD HE WAS ONLY BRUISED ON 10-15-85 HE WENT TOACCESS AND HAD X-RAYS TAKEN AND WAS TOLD HE HAD A BROKEN TOE AND A POSSIBLE SLIPPED DISC. WENT TO HIS DOCTOR AND WAS TOLD TO RETURN ON 10-22-85.

GETTING UP TRACK OF CRANE, SLIPPED, & PULLED CHEST MUSCLE.

GREASING LOADER.JUMPED DOWN FROM TIRE AND PULLED LIGAMENTS IN LEFT FOOT AND ANKLE.

GETTING DOWN OFF WATER TRUCK SLIPPED & CAUGHT RING FINGER LEFT HAND CUTTING IT 6 STITCHES REQUIRED

GETTING DOWN OFF WATER TRUCK & TWISTED RIGHT ANKLE CHIP FRACTURE

STEPPED DOWN OFF MACK TRUCK & TWISTED RIGHT ANKLE

GETTING DOWN OFF LADDER, SLIPPED & SPRUNG LEFT ANKLE.

EMPLOYEE WAS WELDING ON THE TOP SECTION OF A BOX ONTHE PLANT HE WAS STANDING ON A TEMPORARY LADDER AS HE TURNED TO GET ANOTHER WELDING ROD THE LADDER SLIPPED THE EMPLOYEE FELL APPROX 20FT STRI KING A LEDGE ON THE WAY TO THE BOTTOM OF THE BOX CAUSING A DISLOCATION OF THE RT HUMERUS AND CHIPPING THE PROXIMAL CAP OF SAME

INJURED WAS GETTING WATER TO PRIME PUMP, SLIPPED & TWISTED LOWER BACK.