Buscar en el registro

Employee was cutting a hole in gasket material, when the knife slipped causing a cut between the thumb and index finger on the left hand

Employee was walking out of a storage container, twisted the right ankle

Employee was checking a pump for leaks, and was trying to wash the area down when EE was sprayed with chemical in the face and chest area.

Employee was lifting and splitting sample ore bags when EE felt sharp pains in wrist and hand

Employee was pushing against a 55 gal drum, while pulling a drum cart towards the drum

The employee was lifting a 5 gallon bucket of bolts when they felt a pop in their elbow.

Employee was washing down the east tails containment area when employee slipped and caught self with right hand causing the strain.

Arc flash caused minor burns to hand, neck and face.

Employee was in a truck, getting ready to fuel up the vehicle. Employee stepped out and felt like a bat hit the left calf.

Employee was exiting the training room, the door stuck and as employee pushed twisted left knee.

Employee was cleaning air slides with air lance, with proper P.P.E. and foreign material got into left eye.

Employee was filling up an oil skid with a mobile trailer, and the trailer tongue jack fell, the trailer tongue hit the top of the employees right foot.

Employee was closing a valve on a line, EE looked up and foreign material fell into EE's left eye.

Employee was walking and rolled EE's right ankle on uneven ground

Employee was holding a piece of sheet metal while another employee was drilling a hole. The sheet metal slipped and cut the right thumb.

Employee was climbing up the feed chute of the trommel when slipped and twisted or popped their left patella.

Employee was moving a cart when they twisted wrong and heard a pop in the right knee.

The employee was wearing googles, full face shield, and 1/2 mask respirator, while cutting an access door in a tank. Something got in their right eye, causing it to have redness and a scratching feel.

Employee placed their right hand in a pinch point location. Employee was replacing a universal joint on a light duty vehicle.

The employee was in circuit lubing the equipment, EE was stooped over and when ee stood up ee felt a pop or pull.

The employee was checking a hydraulic leak that had developed during operation. While checking the hoses, there was a pin hole that opened up spraying high pressure Hydraulic oil. Which cut the employee's RHT index finger approximately 2.5" in length.

Slipped on ice, snow, uneven ground.

Employee was greasing the cubex drill. employee slipped and fell

Employee was walking towards the lube truck and slipped. When EE slipped, EE hit the left shoulder on the back bumper.

Failure to shut the coal feed off to the west roaster, causing a back draft inside the entoleter and large of amount of heat.

Failed to shut the coal feed off to the roaster, causing a back draft inside the entoleter and large amount of heat.

stepped off the forklift

Employee was pushing a rubber liner into place and felt a sharp pain in the upper right side of the abdominal area.

Employee was removing a large pipe from the Cip area. The pipe became loose and struck employee in the head.

The employee was in LV3917, Employee was sitting in the back seat of the van. The driver hit a large hole, causing the van to bounce and the employee hit the ceiling with EE's head.

An employee was helping another employee weld a steel plate in the bag house. this area was tight and the employee had some exposure to weld flash.

While employee was changing the feed cylinder on the cubex drill barrel, the cylinder unexpectedly lurched forward catching right hand between the cylinder and the drill cradle, trapping middle finger.

Employee was working on the cone crusher. As employee was unscrewing the bowl, left hand slipped off the ram and as employee went to reach with right hand, right thumb was pinched.

While the employee was moving a 3 inch sump line, on one end of the line was a rope, that the employees used to assist with moving the line across the tank. The line fell, causing the rope that the employee was holding on to pull and jerk on the employees shoulder.

Employee was walking backwards in the maintenance shop. While doing so EE tripped over a pallet and landed on the part that was on the pallet and hitting EE's tail bone.

Employee stepped off a forklift onto the surface and slipped on the ice.

An employee was working at the primary crusher. A propane bottle was knocked over and fell from the upper deck striking the employee on the lower back. on 1/25/2017 the employee arrived at work complaining of pain in lower back, the employee was transported to see a doctor.

Employee was walking from the crew van to the underground administration office and slipped and fell. When employee fell they landed on their self rescuer.

Walking on freshly fallen snow covered ice, employee slipped and twisted left knee.

Employee was unaware that ice formed on the ground causing employee to slip/fall, lt. ankle hurts when walking

Employee was using a hammer inside of a tank to remove mineral scaling, ee struck the tank causing a large piece of scale to come loose falling onto leg causing the injury.

Employee was installing an engine cover on a telehandler (30 lbs). Employee lifted the engine cover and turned upper body to place the cover into position and felt a pain in lower left leg.

While cleaning up the dry the employee had picked up some very dirty coveralls and some of the dust had gotten into ee eyes irritating them.

While lifting something up with a pry bar the employee felt something like a shock go through into their fingers. After every time they squeezed their hand it would hurt. After eating lunch the pain was still bothering them and they reported it.

The employee was moving heavy batteries from one piece of equipment to another and was lifting them with another employee, during moving them emplyee was injured.

The employee was working in the Fine crushing trying to pound a rod into a plugged cone when EE missed with the tool EE was using to hammer and hit finger on the rod.

While the employee was cleaning out the quench tower some hot material fell from the top and landed on arm burning it.

Employee was removing a seat from a piece of equipment.

The employee was cleaning rocks out of the cone crusher when a rock fell down into the cone crusher and smashed finger.

The operator was grading the leach pad entrance and caught a pipe which flexed and threw rocks at the window causing it to break getting debris in EE's eye.