Buscar en el registro

SETTING ARMATURE IN DRAGLINE WITH CAHIN. CHAIN FALL CRANKED DOWN CAUSING DUST AND METAL TO FLY. SPECK OF METAL GOT IN RT. EYE.

HOIST DRUM BEARING WAS THROWING OUT CUTTINGS. THERE IS A FAN BLOWING TO KEEP DRUMS COOL. CUTTINGGOT INTO LEFT EYE.

EMPLOYEE WAS USING CHIPPING TOOL ON SLAC METAL AND A PIECE FLEW UP AND HIT HIM IN THE EYE. HE WAS WEARING SAFETY GLASSES.

PUTTING TRANSMI IN A 637 SCRAPER, SQUATTING AND LIFTING.

HE WAS TAKING INVENTORY OF STEEL ITEMS, JUMPED OFF A RACK ONTO THE GROUND, AND STRUCK A PIECE OF STEEL FLAT STOCK IN HIS RT. LEG CAUSING A GOUGE THAT REQUIRED 6 SUTURES.

MOVING RIPPER SHANK OVER FOR WELDING REPAIRS. FELL ON 2 FINGERS OF RT HAND.

WELDING ON TOOTH BASE, WHEN MOVING AND LIFTING IT HE FELT PULLING IN STOMACH AREA AND FOUND A SORE SPOT STICKING OUT.

PROBLEMS WITH POWER CABLE, HE WAS WALKING THE CABLE TO SEE IF HE COULD FIND THE PROBLEM AND IT FLASHED.

WHILE WALKING THE DRAGLINE, EMPLOYEE SLIPPED OFF THE DRAGLINE SHOE AND HURT HIS BACK AND LOW RIGHT SIDE, SCRAPED THE BACK OF HIS LEG AND RT. ELBOW.

FOOT GETTING OFF OF D8N - TURNED LEFT KNEE.

DURING THE CHANGING OF THE DRAG ROPE WHEN THE ROPE PULLED OFF OF THE DRUM IT FLIPPED OFF THE DRUM IT CAME BACK & HIT EE IN THE LT SIDE OF HIS HEAD HE WAS BEHIND THE DRUM BY THE START CABINET

TOOK RADIATOR CAP OFF GRADER TO CHECK WATER AND WAS SPRAYED WITH HOT WATER.

WAS REATTACHING A MUFFLER TO A LOADER. USING A PRY BAR TO PLACE. THE BAR SLIPPED AND HE FELL BACKWARDS TRYING TO CATCH SELF BY REACHING BACKWARDS. IN DOING SO HE PULLED SHOULDER.

FUELING SCRAPER, BOTTOM CHAIN STEP WAS BROKEN ADN WHEN HE STEPPED DOWN HE SLIPPED HITTING HIS RIGHT ELBOW.

USING A LARGE AIROPERATED IMPACT WRENCH DRIVER. DRIVER WAS ACCIDENTLY ACTUATED CAUSING THE SOCKET TO TURN. T HE WIRE COTTER KEY HOLDING THE SOCKET CAME LOSE AND PENTRATED MEPLOYEES LEFT ARM.

WIPING GREASE FROM THE BACKSHAFT OF THE DRAGLINE. THE RAG BECAME TANGLED IN THE GEAR PULLING HAND TOO CLOSE TO THE GEAR AND CUT THE END OFF THE RT INDEX FINGER AND CUT THE SECOND FINGER TO THE BONE.

PUTTING DRIVE SHAFT IN 980 LOADER. SMASHED FINGER BETWEEN DRIVE SHAFT AND FRAME.

REAMING STEEL PLATE ON DRAGLINE, GOT A METAL FRAGMENT IN EYE.

DIRTH ROCK FELL FROM HIGHWALL ON THE FACE GETTING INTO EYES, WHILE PUMPING.

PICKUP WAS PARKED ON RAMP WITH MOTOR RUNNING & TRUCK OUT OF GEAR. EMPLOYEE HAD BLOCKED TIRES BUT GROUND WAS SOFT & BLOCK PUSHED INTO THE GOUND CAUSING TRUCK TO ROLL INTO EMPLOYEE.

OPER SCRAPER AND IT BOUNCING THREW OUT OF SEAT CAUSING HIM TO BUMP HEAD AND HURT BACK

EE WAS ATTEMPTING TO CLEAN MUD THAT WAS LODGED IN A RUBBER HOSE BY STRIKING IT AGAINST A PIPE. WHEN THE EE WAS SWINGING THE HOSE, HE STRUCK HIS LEFT HAND AGAINST THE CORNER OF A METAL BUILDING , CAUSING A CUT TO THE BACK OF THE HAND REQUIRING 4 SUTURES.

RUNNING GRINDER IT KICKED BACK CUTTING EMP LEG

EMPLOYEE WAS MOVING POWER CABLE AND LEFT THUMB BECAME ENTANGLED IN THE ROPE.

EMPLOYEE WAS HOISTING MATERIAL INTO TIPPLE, WHEN HE GRABBED CABLE AND GLOVE HE WAS WEARING BECAME CAUGHT IN CABLE AND PULLED FINGERS INTO CABLW PULLEY.

EMPLOYEE STEPPED IN A HOLE, FELL DOWN AND CUT HIS RIGHT LEG ON METAL FLOOR, REQUIRING STITCHES.

EMPLOYEE WAS LIFTING CATERPILLAR PARTS INTO TRUCK, RUPTURING RIGHT GROIN AREA. EMPLOYEE CONTINUED TO WORK UNTIL 7-17-91, WHEN HE HAD SURGERY TO REPAIR THE RUPTURE.

EMPLOYEE WAS WORKING ON THE DRAGLINE-DURING HIS DESCENT,HE MISJUDGED THE LOCATION OF THE HANDRAIL,CAUSING HIM TO FALL APPROX 6 FEET TO THE GROUND,LANDING ON HIS BACK.

EMPLOYEE WAS SUPERVISING THE REMOVAL OF THE EXTENSION SHAFT FROM THE 7400 DRAGLINE AS THE SHAFT WAS BEING HOISTED FROM THE FLOOR IT SWUNG AROUND PINNING THE EMPLOYEE'S LEG BETWEEN IT AND THE M ACHINE BASE.

EMPLOYEE WAS REMOVING BOLT FROM MOUNTING ON 7400 DRAGLINE.BOLTS ARE 2" X20" LONG.BOLT SLIPPED AND EMPLOYEE GRABBED FOR IT,CATCHING TIP OF FINGER BETWEEN THE BOLT AND HOUSING.

SLICK ROADS

SLICK ROADS

EMPLOYEE PINCHEDD LITTLE FINGER OF RIGHT HAND BETWEEN FRICTION BAN & BELLCRANK

REPAIRING ON DRAGLINE BUCKET WHEN A PIECE OF LONG STEEL BAR FELL STRICKING LITTLE FINGER OF RIGHT HAND.

EMPLOYEE WAS HELPING TO REPAIR A ROLL CRUSHER WHEN HE PICKED UP A PIECE OF STEEL HURTING HIS BACK

INSTALLING ROCK GUARD ON RIPPER WITH SLEDGE HAMMER CHIP METAL CAME OFF

EMPLOYEE WAS STEPPING OFF THE BACK OF A TRUCK TO THE GROUND AND WHEN HE DID HIS KNEE POPPED.

STEEL PLATE BEING LIFTED INTO POSITION FOR CUTIING WHEN IT SLIPPED OF OF HOIST.

EMPL WAS CHANGING IDLER ON WEST STACKERS WHEN IDLER SLIPPED FORWARD.

A FORD LUBETRUCK WAS TOTALLY DETROYED BY FIRE WHILE PARKED INSIDE A GARAGE THE GARAGE SUSTAINED MINIMAL FIRE AND SMOKE DAMAGE THE TIME THE FIRE BEGAN OR ITS DURATION IS UNKNOWN HOWEVER THE RIE IS BELIEVED TO HAVE STARTED APPROX 2AM ON 10/14/89 AND SELF-EXTINGUISHED BY THE TIME MINERS ARRIVED FOR THE DAY SHIFT MSHA WAS NOTIFIED OF THIS FIRE ON 10/16/89 AND IVESTIGATED BY SUPERVISOR

WIND BLEW METAL OBJECT INTO EYE.

EMPLOYEE SLIPPED OFF DOZER WHILE WORKING ON WATER COOLER DUE TO MUD ON PUSH BAR, CAUSING PULLED MUSCLES IN LEFT LEG.

EMPLOYEE WAS WLAKING UNDER A CONVEYOR AND RAISED UPA ND HIT A PIPE WHICH DROVE HIM DOWN TO THE GROUND CAUSING ACUTE CERVCAL STRAIN.

EMPLOYEE STANDING ON LADDER, AND BOTTOM OF LADDER KICKED OUT, CAUSING EMPLOYEE TO FALL ON LEFT ANKLE.

EMPLOYEE WAS WO9KING ON A CONVEYOR, REPAIRING IT WITH WELDING TOOLS, WHEN STRUCK IN THE FACE BY A PIECE OF COAL.

EMPLOYEE WAS TR2ING TO KNOCK RIPPER TOOTH OFF D-10 DOZER AS HE STRUCK THE TOOTH WITH A HAMMER 2 PIECES OF STEEL BROKE OFF ENTERING THE EMPLOYEES LEG

EMPL LIFTING ON3COAL CHUTE BRUISED OR STRAINED DISC BETWEEN SHOULDERS.

EMPLOYEE WAS LIFTING A PIECE OF IRON, RAISED UP UNDER A CONVEYOR AND JAMMED HEAD AND NECK, ACTUAL EXTENT OF INJURIES UNKNOWN AT THIS TIME UNTIL FURTHER MEDICAL EXAMINATIONS HAVE BEEN COMPLETED BY SPECIALIST.

EMPLOYEE KICKED DOOR OF TRUCK RTO GET IT OPEN BEACUSE IT WAS FROZEN AND PULLED BACK MUSCLES.

EMPLOYEE WAS CLEANING FROZEN COAL AND MUD FROM UNDER A CONVEYOR WHEN PRY BAR SLIPPED BRUISING LEFT HAND.