Buscar en el registro

INJURED PERSON WAS REMOVING BOLTS THAT SECURED MINER CUTTER HEAD TO MINER CUTTER BOOM, WHEN WRENCH SLIPPED MASHING FINGER BETWEEN WRENCH AND MINER CUTTER BOOM.

EE REPAIRED A FLAT TIRE ON A GRADER LOCATED ON TOP OF HAUL ROAD. AN 18 WHEEL TRUCK WAS HAVING TROUBLE GETTING UP THE ROAD WHERE ANOTHER TRUCK WAS WAITING TO COME DOWN THE ROAD. EE WAS ASKED TO TRY TO HELP PUSH THE COAL TRUCK UP THE HILL. EE POSITIONED THE GRADER BEHIND THE TRUCK. THE CO-WORKER IN THE TRUCK NOTICED THAT THE GRADER WAS MOVING BACKWARDS. EE WAS UNCONSCIOUS BUT CAME TO

EE CALL MY HOUSE MON 2/8/99 SAID HE HAD HURT HISBACK ON 2/5/99 RUNNING A SHUTTLE CAR ASKED HIM HOW HE HURT IT HE SAID RUNNING S-CAR THAT FRIDAY THE ACCIDENT WAS NOT REPORTED TO ME ON THAT DATE NOR ANYONE ELSE. HE SAID HE WAS GOING TO DR TO GET IT CHECKED OUT, I TOLD HIM I WOULD FILL OUT ACCIDENT REPORT

OPER. WAS TRAMMING TOWARD MINER, AND ROCK LAYING IN HAUL ROAD. BUGGY RAN OVER ROCK THROWING OPER. UP AND HITTING HEAD ON CANOPY.

EE WAS ATTEMPTING TO HAND DRILL CABLE WHILE STANDING ON RIPPER BARRELS. HE SLIPPED AND FELL ONTOBITS INJURING HS RIGHT HAND.

THIS SO CALLED ACCIDENT WAS NEVER REPORTED TO ME. THE CLINIC CALLED AND SAID EE GOT INJURED ON 2-18-98. HE WAS THE FOREMAN AT THIS TIME. HE DIDN'T FILL OUT AN ACCIDENT REPORT. HE WORKED 2 DAY S AFTER THE 18TH. I DON'T KNOW HOW THIS ACCIDENTOCCURED OR HOW EE KNEW ANY ACCIDENT WAS TO BE REPORTED AT THE TIME IT HAPPENED, AND ACCIDENT REPORT TO BE FILLED OUT.

WHILE DOING PRESHIFT EXAMINATION FOREMAN FOUND THAT RIBS HAD SLUTHED OFF MORE THAN USUAL HIS SUPERVISOR WAS NOTIFIED AND DECISION WAS MADE TO MOVE THE SECTION TO ANOTHER AREA OF THE MINE. EQUI PMENT WAS MOVED AS FAR AS POSSIBLE POWER CENTER MOVED AND WHILE THE MEN WERE HOOKING UP POWER CENTER AT NEW LOCATION THE 2ND SOUTH EAST PANEL FELL.

WHILE INSTALLING ROOF BOLTS, A PIECES OF DRAW ROCK BROKE BETWEEN A ROOF BOLT & THE ATRS & STRUCK THE PERSON ON HIS RIGHT LEG ABOVE THE ANKLE. HE WAS RUNNING THE ROOF BOLTER ON HIS KNEES. THAT IS HOW THE ROCK STRUCK HIM ON THE BACK SIDE OF HIS LEG. THIS HAPPENED IN THE #4 ENTRY.

EE WAS OPERATING A SHUTTLE CAR, BOUNCED ON ROUGHHAUL ROAD & EXPERIENCED BACK PAIN.

EMPLOYEE WAS DOING MAINTENENCE ON MINER. HE WAS STANDING ON TOP OF MINER, LOST HIS FOOTING, SLIPPED AND FELL TO THE FLOOR CAUSING PAIN TO LEFT KNEE, LEG AND FOOT AND TO HIP AND LOWER BACK.

HE WAS STEPPING OFF MANTRIP WHEN HIS KNEE JUMPED OUT OF PLACE. HE SAID THAT IT HAD POPPED OUT BEFORE.

WAS CLEANING A ROCK FALL UP ON #3 BELT HELPING ON A ROOF BOLTER WHEN A PIECE OF PINCH STEEL BENT AND HIT HIM IN THE HAND.

SECTION WAS PILLIARING MAKING A BELT PULL BACK PEE ROOF BOLTER OPER. WAS DRILLING A TESTHOLE GOT HIS GLOVE CAUGHT IN BETWEEN TWO PIECE OF DRILL STEEL. RESULTING IN TWISTING HIS WRIST.

ROOF BOLTER OPERATOR WAS STRAPPING A KETTLE BOTTOM AS HE STARTED SPINNING BOLT THE STRAP STARTED TURNING. EE REACHED TO GRAB STRAP TO PUT IN PLACE AND CUT TWO FINGERS ON LEFT HAND.

PINNER OPERATOR WAS BOLTING TOP, REACHED TO GET A BOLT WRENCH AND HIT LEVER THAT LOWERS HEAD ON BOLTER AND THE HEAD CAME DOWN CATCHING EE ON THE KNEE.

EE WAS BRINGING HIS ROOF BOLTER ACROSS THE BELT HEADING TO ADVANCE UP IN THE LAST LINE OF CROSS CUTS. HIS CABLE WAS TANGLED UP WITH THE OTHER ROOF BOLTER CABLE. HE DROPPED THE OTHER CABLE TO G ET CABLES UNTANGLED HE HAD PARKED HIS ROOF BOLTER CLOSE TO THE RIB. HE STARTED TO MOVE HIS ROOF BOLTER UP AND CAUGHT HIS LEFT LEG BETWEEN THE ROOF BOLTER AND RIB.

ROCK FELL FROM RIB TO ROOF BOLTS. VICTIM WAS SERVICING MINER WITH CO-WORKER. NO PRODICTION HAD BEGAN ON THIS SECTION. THE ACCIDENT BROKE VICTIMS LEFT LEG AND DISLOCATED RIGHT LEG.

ROOF FALL ON #3 WEST MAINS BELT LINE. AREA HAD BEEN BOLTED WITH 3' BOLTS 15 YEARS AGO. THE ROCK FELL AT 3'. THE FALL WAS 36" THICK X 30'L X 20'W. THE FALL OCCURRED AT SPAD #668 ON W MAINS BELT

DURING MAINTENANCE SHIFT THE ROOF FELL IN THE #2 ENTRY, STARTING 1 BREAK INBY SURVEY STATION 953 TO NEAR FACE OFENTRY A DISTANCE OF I 150 FT, FAALL WAS 8-10' THICK, 18-19 FT WIDE, FALL OCCURRE D AT + 10:00 PM 9-14-95.

VICTIMS BROTHER REPORTED TO ME: ON 8-15-95 EE IN LIFTED A FEEDER FLIGHT OUT OF FEEDER WEIGHING 25-30 POUNDS, AND HURT HIS BACK.

ROCK FALL ON NO. 3 MAIN LINE BELT. INTERSECTION 8 BREAKS FROM HEADDRIVE INTERSECTION FELL IN. APPROX 20 FT WIDE. 3 FT THICK.

EE WAS BENDING OVE RLOOKING AT PINS IN GATTERING HEAD ON MNER WHE A SMALL SECTION OF TE RIB ROLLED OFF. LETTING A PIECE OF DRAW ROCK FALLS TRIKING EE ON THE BACK. THEY HAD TRAMME DMIENR DOWN NO. 4 ENTRY 3 BRAKES OUT OF HTE FACE AREA TO PUT PINS AN DBUSHNG SIN GATHERING HEAD. WHEN THIS ACCIDENT OCCURED.

FALL WAS FOUND IN #2 ENTRY #2 ENTYR + 900 FT OUTBY SECITON FALLW AS + 18'W + 20'L & +4-5' THICK. MSHA FIELD OFFICE WAS NOTIFIED & AREA CRIBBED OFF.

MINER WAS CUTTING RIGHT PILLIAR IN NO 6 PILLIAR. WHEN A SECITON OF ROCK FELL ON MINER. NO ONE WAS INJURED. THE MINER WAS BEING OPERATED BY REMOTE CONTROL.

ROCK FELL OUT BETWEEN BOLT'S HIT HIM ON BACK.

MINER OPERATOR WAS LAYING CABLE OVER TO RIGHT RIB AND HURT HIS BACK WHILE LAYING CABLE OVER TO THE RIGHT RIB.

METER BLEW UP CAUSING BURNS TO HANDS AND FACE.

NO ACCIDENT WAS EVER REPORTED TO ANY COMPANY OFFICIAL CONCERNING THIS REPORT. THIS REPORT WAS INVESTIGATED BY MSHA ON 11-4-94. INTERVIEWED 4 EMPLOYEES NONE SAW THIS ACCIDENT.

EE WAS DIRTY FROM WORK AND HAD MUD ON BOOTS. WHEN HE STEPPED ON REAR BUMPER HIS FOOT SLIPPED, CAUSING HIM TO FALL ON BACK.

EE WAS PULLING MINER CABLE THAT HAD GOT TANGLED IN PINNER CABLE AND INJURED BACK. EXTENT OF INJURY UNKNOWN.

INJURED WAS HELPING MECHANIC REMOVE BOLTS FORM THE TRAM CHAIN OVER OF THE MINER WHEN THE RATCHET HE WAS USING SLIPPED AND HIS HAND STRUCK A PIECE OF METAL.

INJURED WAS HELPING TO LIFT A TIMBER FROM SCOOP BUCKET WHEN HE FELT A PAIN IN LOWER BACK AND NUMBNESS IN LEFT LEG.