Buscar en el registro

Checking the vent for an obstruction, but didn't have the fan off, and finger got hit by the fan blade.

Pulling conveyer belt and felt something pop in groin. Has to have Hernia operation.

Baring Tail pulley on ground. Hat came off and stood up into Chute. Scalp Laceration and received staples.

Knee was getting tired & so he stretched his leg out of operator compartment. The bucket was in the air & when it went down it broke his leg.

Was pounding liner out of crusher cone and caught his finger between hammer and cone top. Severe laceration and top of finger broke.

Loosening bolt when wrench slipped, bent his right hand backwards and broke it.

He was installing a new screen. He was pulling and twisting and hurt his lower back.

Removing sampler bracket from product conveyor and strained lower back.

Taking braces off double screen and was putting the bolts back on it and brace fell on his hand and cut it.

Welding all day and air arcing with auto darkening hood. Burned his right eye.

Employee was using a disc grinder and something got in his left eye. He was wearing safety glasses at the time of the accident. His eye continued to get worse and finally went to the Dr on the 7th.

Two oversized rocks were lodged in the jaws of the portable crusher. I managed a chain around one rock and had someone else pull it out. He then put his right toes in a pinch point for a step to reach the remote control. On grabbing the remote control, he absentmindedly switched the jaws on and caught his foot. His 4th and 5th toes on his right foot were fractured.

Employee was repairing a conveyor belt and was hammering a pin through a hole and hit his left hand with the hammer. He went to the ER and got stitches.

Shoveling OT Belt. It was windy and dusty. Eyes got full of dust and sand. Eye kept hurting through the next day.

Heavy lifting. Tearing out crusher plant, pinched nerve, strain. Sharp pain shooting down leg.

Carpal tunnel in left wrist, ongoing for quite some time. Caused by steering loader - using joy stick with left hand.

Slipped and fell on railroad tie hurting ribs and back.

Rock chipped and piece of something went into left eye. Went to doctor and he drilled out imbedded peice of metal.

EE WAS CLIMBING INTO LOADER AT THE NIBLEY PIT. HE FELL BACKWARDS FROM LOADER AND LANDED ON HIS BACK, RIGHT HIP AND SHOULDER. HIS HEAD HIT LAST. EE WENT TO THE DOCTOR ON 11/20/04 AND HE HAS A BROKEN TAIL BONE.

Using crow bars to remove a peice of hard pan in the trap (at crusher) and hurt lower back.

Loading Metal chutes into the Bobcat when he smashed and cut his ring finger on the right hand

climbing into loader, hand slipped off hand rail, right foot wedged between step and bumper of loader

CUTTING BELT, SLIPPED & CUT UPPER LEFT THIGH.

EE WAS SETTING UP CRUSHER & PUTTING IN PROTECTIVE RAILING WHEN IT SHIFTED, HE THEN FELL BREAKING HIS HEEL.

EE WAS ON CONVEYOR BELT TRYING TO LOOSEN A TURNBUCKLE, WHEN IT GAVE WAY HE LOST HIS BALANCE & FELL. HE LANDED ON HIS ANKLE & FRACTURED HIS LEFT HEEL.

EE WAS CHECKING VOLTAGE ON CONVEYOR BELT AND THE ELECTRICAL BOX BLEW UP, BURNING BOTH OF HIS HANDS.

EE WAS REMOVING A ROCK THAT WAS STUCK IN THE SCREEN ON THE CRUSHER. HE HIT THE ROCK WITH A HAMMER. A PIECE OF THE ROCK BROKE OFF AND HIT EE ON THE UPPER LIP CUTTING IT. THE CUT REQUIRED SUTURE S.

CUTTING SCREEN FOR REPAIR. A PIECE OF METLA WENT INTO LEFT EYE.

EMPLOYEE WAS SETTTING A CONVEYOR. THE CONVEYOR SHIFTED AND HIT ARM. FRACTURE OF THE RIGHT FOREARM.

EMPLOYEE WAS REMOVING BOLTS FROM AN OIL PUMP WITH A RATCHET. THE RATCHET SLIPPED WHEN THE BOLT BROKE AND IT HIT THE EMPLOYEE BETWEEN THE TEMPLE AND THE RIGHT EYE, REQUIRING 5 SUTURES.

EE WAS UNHOOKING CRANE FROM SCREENING PLANT. A PIECE OF RUSTY METAL WENT INTO HIS RIGHT EYE.

EMPLOYEE WAS FIXING SHAKER CHUTE - SLIPPED ON RAILING AND DISLOCATED HIS RIGHT KNEE.

EMPLOYEE WAS BACKING TRUCK UNDER TRAILER. WHEN THE TRUCK HIT 5TH WHEEL PIN ON THE TRIALER, EMPLOYEE HIT HIS LEFT CHEEK ON THE DOOR CUTTING IT. LACERATION REQUIRED SUTURES.

EMPLOYEE WAS DRILLING HOLES FOR TAKE UP BRACKET HE LOST HIS HOLD ON THE DRILL & IT HIT HIM ABOVE THE RT EYEBROW CUTTING HIM (REQUIRED 9 STITCHES)

EMPLOYEE WAS RELINING CONE, HIS FOURHT AND FIFTH FINGERS ON THE LEFT HAND WERE CRUSHED BETWEEN SHAFT AND CONE FRAMING, INJURING THEM. (STITCHES)

EMPLOYEE WAS USING A PRY BAR TO SPREAD BENT BRADCKETS THE PRY BAR SLIPPED OUT OF THE BRACKETS & HIT EMPLOYEE IN THE NOSE BREAKING IT

EMPLOYEE WAS TRYING TO LIFT CABLE TO TIE TO CONVEYOR BELT & INJURED HIS SHOULDER WHEN LIFTING

EMPLOYEE WAS LIFTING HEAVY SPRINGS FOR SCREEN PLANT - PUTTING IN PLACE TO REASSEMBLE FINGER WAS CAUGHT WHICH FRACTURED LEFT THIRD DIGIT.

EMPLOYEE WAS CLEANING RETURN ROLLER ON CONVEYOR. THE BELT CAUGHT THE BAR AND PINNED HAND TO THE FRAME. CUTTING LITTLE FINGER ON RIGHT HAND.

EE WAS WORKING AROUND THE CRUSHER. HAD AN APPARENT HEART ATTACK.

EMPLOYEE WAS TAKING SAMPLES AND HIT HIS HEAD ON THE CONVEYOR FRAME. HIS HARD HAT HIT THE BRIDGE OF HIS NOSE, CAUSING A CUT THAT REQUIRED STITCHES.

DRIVING IN PIT APPARENTLY TURNED HEAD TO LOOK AT SOMETHING IN PIT AND WENT OVER EMBANKMENT ROLLING VEHICLE SEVERAL TIMES.

TRAP FEED WOULD NOT START ON CRUSHING UNIT. INJURED GOT ELECTRICAL TESTER TO TROUBLE SHOOT THE PROBLEM. IT APPEARS THAT POSSIBLY THE PROBES TOUCHED EACH OTHER WHILE CONNECTED TO THE 440 LEGS. THIS CAUSED A DEAD SHORT AND THE WIRES AND CIRCUIT BREAKER BLEW INTO A BALL OF FIRE.