Buscar en el registro

On Monday, November 22, 2021 rock truck model 775G caught fire due to a hydraulic line failure. The truck burned beyond repair.

Lifting heavy rock cleaning the C1 belt on AB plant experiencing pain in groin area

stepping off equipment and sprain right ankle

Tripped on curb of fuel island

Employee left work at lunch time, stated that wheel loader had made back hurt.

Checking oil on 998 loader, slipped on steps due to mud on shoes due to recent rain

Adjusting plate on stacker when it shifted hitting right hand injuring pointing finger

Removing anvil on rope from screen deck when strained shoulder muscle.

Loading rock into crusher. Loader hit buried rock causing loader to stop suddenly. Operator had seat belt on but face went forward striking back up camera view screen

AB plant fixing the Universal crusher. Turning the blow bar by hand. The only way to move it with the power locked out is to put your weight into. While EE was turning it, EE's glove got caught on the blow bar. This caused EE's left hand to be caught between the blow bar and the wall of the universal crusher causing contusion.

Employee was using a cordless drill. EE was drilling and when EE got to the end of the hole it hung up and twisted EE's wrist causing a sprained right wrist.

Climbing onto the loader and put hand on a bee that had landed on railing and got stung.

Employee was carrying a bag of ANFO to load a hole and twisted left ankle when employee stepped on a loose rock. Employee was given an x-ray that was negative and placed on restricted duty.

Employee was washing out hopper of street sweeper. EE was wearing safety glasses but, EE had muddy water splash into right eye. EE had to go to the emergency room where they flushed eye out and provided a antibiotic eye drop.

Employee loaded parts into a truck. EE was putting on gloves and dropped one on the floor. EE bent over picked up the glove and felt pain in their back. EE told supervisor, finished shift. The next morning called in and said was not able to report to work. We sent them to the doctor on 5-15-2019 and the doctor has placed them on restricted duty.

Employee had just completed a walk around inspection of employee's CAT775 Rock Truck 26-1009, as employee was climbing back in felt sharp pain in groin area

As loader was getting out of cab the loader crushing plant. EE struck knee on door latch, EE's left knee received a hematoma.

Employee was watching safety video and passed out.

Employee was pulling on tire chain. Employee was using a tee bar with a hook on the end to pull the chain in place. The employer was pulling hard and the hook slipped of the chain causing the employee to fall on back

While exiting a front end loader at the rear step ladder, lost footing right foot got stuck as ee exited and ee twisted right knee

Employee reported 9/29/16 that hands were going numb when working with tools. Employee saw Doctor and was given physical therapy. Employee was never placed on modified duty or lost time until surgery on 4/10/17

hiking around plant pond looking for a water leak. picked up a tick

Removing small center shaft on loader with come-along. Shaft got hung up on bolt and slid to strike forehead. Cut on forehead, cleaned and placed band-aid on cut. Sent to care center to just have them evaluate. They place two stitches and returned EE to work with no restrictions.

Removing flashing from talley pulley section of the A/C side conveyor belt. Employee did not completely remove retainer & then jerked on the used flashing straining right shoulder tendon

did not follow correct procedures

employee does not know what caused injury employee woke up 5/6/16 with discomfort in R thumb, employee did not contact supervisor until 5/9/16 when EE requested to see a doctor

Employee was reaching down to ground to pick up pipe wrench with right hand when EE's left foot slipped on flat ground with a thin layer of gravel causing EE to strain lower back. Employee had good soles on boots

Customer was driving the empty truck down the quarry road when it toppled over and rolled 200 feet down and driver was thrown from truck as EE did not have a seatbelt on. Accident pending California Highway Patrol (CHP) report. Not our employee, was a customer.

While swinging the 103 hoist crane around with a load on the hoist, EE was pulling from a rope and co-worker was assisting to swing the crane by pulling from the hoist chain. The rope broke. EE fell backwards onto the Nordberg crusher. Adjustment ran. EE fractured left side ribs.

Working on loader and employee felt a slight strain in back at the time. The next day the employee reported that his back was feeling sore. Employee was placed on modified duty starting 6-25-15.

Employee went up stairs using hand rails and missed a step. He twisted his right knee when he slipped. Employee reported injury on 6-1-15. Doctor did not issue restrictions until 6-23-15. Supervisor did not learn about restrictions until 7-14-15.

Employee was removing a bolt on a 330CL Excavator to change out attachments and when the bolt broke loose his left thumb was smashed between the wrench and the boom. His left thumb began to swell after a while. A co-worker and the employee talked and decided to be safe to have his left thumb looked at.

During disassembly of transmission pump, a hammer and punch were used to remove the shaft from the housing. On the third strike a chip flew off the punch and struck the upper lip. Employee requested a band-aid and declined a trip to the doctor.

Employee was doing housekeeping in surplus equipment storage area. He was not wearing gloves while picking up old scrap wood and equipment parts. Employee noticed his wrist itched but was not aware of a bug bite until the next morning when he noticed his left wrist was swollen. We sent employee to the doctor where he received a tetanus shot and a splint to wear for two days.

Parking area had material added to it in the a.m. raising the truck level so that final step to ground was about 3'.

The lab Tech was walking into the lab and tripped on rubber floor mat. We repositioned the mat away from the entrance to reduce the trip hazard. EE fell onto concrete floor straining or spraining left wrist. He was placed on modified duty.

While cutting steel in a band saw a small amount of steel particles built up close to the blade drive pulley. Employee lift guard and went to clear build up with finger, saw blade caught glove and pinched index finger tip of the left hand on edge of saw frame.

EE has incurred a reportable hearing loss in his right ear. First 2012 annual audiogram test was on 10/31/12 and retest was given on above date. The retest confirmed a right ear shift. EE is sch. to see an ear specialist. EE was diag. by his personal Dr. to have an ear infection 11/30/12.

doing a welding repair under an excavator in an awkward position

He compromised the guarding in order to knock dust off the conveyor frame. The hammer he was using was grabbed by the conveyor belt pulling it and right hand between the troughing roller and underside of the belt. Hammer got wedged between the skirtboard and roller causing belt to stall. His right hand, thumb and first two fingers were pinched between the belt and troughing roll.

Employee felt and heard a tearing sound from the left shoulder while working the lever back and forth of a 1/4 ton chain come along. Employee was in the act of removing a rod assembly from a hydraulic cylinder. The hydraulic cylinder was laying horizontally in the shop on the cylinder work bench.

Employee set lunch box down to go load a skid steer loader on an equipment transport trailer. As the employee set his lunch box on the ground he heard two (2) popping sounds and felt extreme pain in right shoulder.

Employee was replacing screen cloth sections on the second deck of the Telesmith screen at the AB Plant when he felt pain in his right shoulder. The employee was taken to a local health care facility and returned to work on restricted duty.

Loader was parked on pressure wash pad, employee was climbing down ladder and slipped

EE was pulling out a piece of steel from yard storage, when he was stung by 5 or 6 yellow jackets on arm and neck. (L) arm was quite swollen.

EE had been typing at desk since start of shift. He turned to look at calendar (right side) and felt neck stiffen. Progressively got worse as day progressed. EE was released to full duty on 9/26/11 but was prescribed physical therapy, which caused incident to become reportable per Denver Office. First appt available was 9/13/11.

While EE was filling 5 gal bucket with soap and exiting an area where other containers were stored, his foot was caught on said containers and caused ee to trip. As he was falling his left forearm contacted a hot muffler on steam cleaner. This caused 2nd degree burns to effected area.

Employee was assisting with the assembly of the upper frame of a Pegson cone crusher. A driving maul tool and 20 pound sledge were being used to help drive the concave wedges in place as a metal chip struck the employee in the left hand. The employee was taken to a local healthcare facility and stitches were required to treat lacerations in his left index & middle fingers.

3 ee where installing conveyor belting over the top of the modules on the JCI screen to protect them from the elements. 2 ee put a piece of pipe through a roll of belting to use as a handle. When picking up the belting and starting to walk around a corner ee felt a strain in his left knee.

Employee was assisting with the installation of a new rubber skirt on the oversize chute at the sand plant. When he reached for and pulled on the bottom right corner of the rubber piece he felt something pop in his right arm.