Buscar en el registro

Employee was making sure that a tie-down strap was secure to truck. When ee pulled on the strap, it was loose, ee lost balance and fell. As ee fell the strap caught and pulled arm. This caused rotator cuff on right shoulder to tear.

Employee was painting outside of hopper when they lost balance and fell. The fall restraint lanyard expanded to slow the fall. Then the tie off point gave way allowing them to impact the ground causing contusion to right elbow, and sprain the right knee.

Employee placed hand between clamp on bagging machine. Clamp closed on finger, causing crush/laceration injury to right index finger.

Annual hearing test shows a recordable difference between the most recent and the baseline data.

Employee was leaving mill building to retrieve some tools to perform maintenance tasks. Employee stepped from walkway to temporary solid block unit step, the block rolled, employee twisted an ankle and fell.

Annual hearing test shows a recordable difference between the most recent and the baseline data.

Employee was opening a pallet of super bags by cutting the plastic band with EE's pocket knife. When the knife cut through the strap, it then punctured EE's left arm.

EE picked up a pallet and started to twist around and lay it on another pile when EE felt a pop in EE's back.

Employee was bagging dust and occasionally a bag will split. Employee said this particular bag burst and the dust blew up under EE's safety glasses.

EE began EE's shift at 3:30 p.m. on 1/11/16. Performing normal duties under normal conditions. EE started out shrink wrapping material. Then EE was going to begin loading rock dust into bags. EE bent over to pick up an empty bag, when EE said EE felt a pop/pull in EE's groin.

While going down stairs, employee tripped, tried to catch himself on handrail and injured right shoulder.

while lifting wheel chocks from truck bed a piece of metal got flipped up and hit cheek cutting face, requiring 4 stitches

While trying to dislodge a loaded wooden pallet from loading conveyor, employee was pulling on pallet and felt pain in wrist.

while shoveling spillage material from concrete floor felt pain in lower back

while working on truck frame using a 10 pound hammer knocking string loose felt pain in lower right side

While assisting fellow employee trying to hammer out a 3/4" dia. bolt out of slot with 2 lb. hammer, hammer hit left middle finger and broke finger.

Getting out of dump truck, driver slipped on steps and fell to ground hitting his left hip. Steps were wet due to rain.

2 employees were moving a roll of shrink wrap one on each end of roll, they bent over to pick up roll and ee hurt his back raising back up with roll.

Tripped over hose and broom while washing truck #130, fell between truck and cross member.

Was getting on 345 excavator stepped on first step with hand on hand rail felt pain in back.

Throwing shrink wrap bag over pallet of dust.

Employee was stepping out of Komatsu skidstear loader twisted let knee.

Changing belt line, slipped on piece of belt being removed.

Bag of rock dust fell off belt line. Employee grabbed bag as it slipped and pulled his left shoulder.

EE was stacking pallets 10 high, 41 lbs each and he felt pain in right side.

EE was cleaning screen on crusher caught right little finger between lock and gate arm.

EE was walking by loading dock, door was opened and blew dust from new wood pallets into his right eye.

He was chasing threads on left jaw die bolt. Thread chaser slipped and right hand hit frame.

WAS WALKING FROM TRUCK CAB BACK TO LOAD TRAILER. SLIPPED AND FELL BETWEEN DOCK AND TRAILER BED, TWISTING RIGHT KNEE.

CUTTING BEARING OFF CRUSHER RUN BELT; METAL DUST BLEW IN LEFT EYE.

EE WAS CLIMBING INTO LOADER AND FELT PAIN IN LOWER BACK.

EMPLOYEE WAS CLIMBING OUT OF LOADER STEP ON GROUND AND CREELED LEFT ANKLE.

CHANGING V BELT USING A COME A LONG TO LIFT MOTOR MOTOR SLIPED FELL ON RIGHT HAND.

EE WAS LOADING 50 LB BAGS ROCK DUST ONTO PALLET FELT PAIN IN MIDDLE LOWER BACK.

CHECKING WEIGHT OF BAGGED ROCK DUST COMING OFF CONVEYOR, TURNED TO HAND BAG TO FELLOW EMPLOYEE.

EE WAS BENDING OVER TO SHRINK WRAP A PALLET OF DUST WHEN HIS BACK LOCKED UP AND HE FELL TO THE GROUND.

HE WAS CHANGING MOTOR TO RECLAIM SCREW TO ELEVATOR IN MILL BLDG. HE STRAINED HIS ABDOMEN WHILE LIFTING MOTOR IN A TIGHT SPACE.

EE WAS STANDING ON TOP OF A 6" CHANNEL CONVEYOR USING A 2 LB HAMMER HITTING SIDE OF CHUTE TO DISLODGE FROZEN MATERIAL. HE HAD BEEN DOING THIS FOR APPROX 5 MIN. WHEN HE LOST HIS BALANCE AND FEL L 66" TO CONCRETE FLOOR HITTING HIS HEAD.