Buscar en el registro

WHILE CLEANING OUT FEEDER II WITH AIR GUN, THE AIR LINE GOT PULLED INTO THE HEAD SECTION OF #13BELT. EMPLOYEE COULD NOT RELEASE THE AIR LINE QUICKLY ENOUGH & HIS ARM WAS PULLED IN BETWEEN THE HEAD SECTION OF BELT.

WHILE STANDING BENEATH BELT CLEANING AND LOOSENING CONCRETE, PIECE OF CONCRETE FELL ONTO EMPLOYEE.

WHILE OEPRATING 80 TON HAUL TRUCK, TRUCK CAUGHT FIRE, EMPLOYEE LEAPT FROM TRUCK.

EE WAS CLIMBING ON A CONVEYOR AND SLIPPED AND CUT ANKLE ON FRAME OF CONVEYOR

EE WAS USING A PRY BAR TO PRY A SCREEN. THE BAR SLIPPED HIS RIGHT HAND STRUCK THE SCREEN CAUSING A LACERATION OF THE RT THUMB-REQUIRED SUTURES

EE WAS CUTTING 6" TUBES FOR DRILLED HOLES USING A UTILITY KNIFE. EE BRACED TUBE ON LEG AND CUT TOWARD HIMSELF. THE KNIFE SLIPPED AND STABBEN INTO KNEE

EMP WAS CLIMBING ON LATTICE FRAME CONVEYOR DURING INITIAL CONSTRUCTION PHASE. THERE WERE NO CAT WALKS INSTALLED ON THIS CONVEYOR AT THE TIME OF THE ACCIDENT. THE CAT WALK WAS COMPLETED SHORTLY AFTER THE INCIDENT. EMP HAD PREEXISTING KNEE PROBLEMS WHICH WAS EXACERBATED BY THE ACTIVITY.

EMPLOYEE WAS STANDING BY A PORTABLE CEMENT MIXERWHICH WAS BEING PICKED UP BY A FORKLIFT. THE MIXER WAS FROZEN TO THE GROUND AND IT BROKE FREE AND JUMPED AT THE WORKER HITTING HIM IN THE BODY A ND RIGHT FOOT.

WHILE DEBURRING, THE EMPLOYEE PULLED THE TOOL TOWARD HIS LEFT HAND. IT SLIPPED OFF OF THE WORK AND CUT THE PALM OF THE LEFT HAND BELOW THE THUMB

WORKER WAS MOVING DRUM OFF OF PALLET WHEN HE FELT PAIN INBACK. WORKER DID NOT USE DRUM HANDLING EQUIPMENT PROVIDED AT THIS LOCATION.

WHILE STEAM CLEANING A TRUCK, THE EE PASSED THE STEAM WAND OVER HIS RUBBER BOOTS. THERE WAS A SMALL PINHOLE IN THE BOOT WHICH ALLOWED THE PRESSURIZED STEAM TO ENTER AND CONTACT THE SKIN ON HIS FOOT.

EMPLOYEE TWISTED HIS BACK WHILE CLIMBING OUT OF A SCREEN DECK. EMPLOYEE DID NOT REPORT OR SEEK MEDICAL TREATMENT UNTIL 8-22-95.

EE WAS CUTTING BELTING WITH A RAZOR KNIFE TO OMAKE A SPLICE WHEN HE SLIPPED AND WITH HIS ARM. HE RECIEVED FIVE SITCHERS.

UNLOADING RUBBER BELTING FROM A FLATBED TRUCK EMPLOYEE NOTICED PAIN IN LEFT GROIN AREA

WHILE REMOVING A DRIVE SHAFT UNIVERSAL JOINT, EMPLOYEE WAS STRUCK IN LEFT ARM WITH A PIECE OF METAL WHICH BROKE OFF OF U-JOINT WHEN STRUCK WITH HAMMER.

PULLING STEEL OFF A SHELF, HIS FOOT HIT A PIECE OF STEEL. THE STEEL FELL OVER AND HIT HIS FOOT- FRACTURING HIS TOE THROUGH HIS SHOES.

WHILE LOADING PRIMARY SCREEN ONTO A FLATBED TRUCK A SCREEN SLIPPED & SKID OFF THE STACK MAKING CONTACT WITH THE TOP FRONT OF THE ANKLE

EMPLOYEE WAS STRIPPING THE CASING OFF FROMA PIECE OF WIRE WHEN HE SLIPPED W/THE KNIFE, CUTTI GHIS FINGER. THE WEATHER WAS VERY COLD CAUSING HTE CASING TO BE ANORMALLY HARD. EMPLOYEE RECEIVED 4 SUTURES, BUT RETURNED TO WORK AS AN ELECTTRICIAN.

EMPLOYEE WAS WALKING IN THE MILL WHEN HE TURNED HIS HEAD. THERE WAS A PIECE OF METAL STICKING OUT THAT HAD BEEN DISCARDED & WAS FROZEN TO THE TOP OF A CONVEYOR FOUNDATION. THE EMPLOYEE LACERAT ED HIS LIP ON THE METAL.

EE WAS CUTTING W/A BAR SAW. HE SET THE SAW SO THAT IT WAS NOT SUPPOSED TO MOVE. HE THEN REACHED OVER TO GRAB A PART WHEN THE SAW CONTINUED TO COME DOWN AND HIT HIS FINGER. IT IS A HORIZONTAL B AN SAW WHICH WAS FOUND TO HAVE DEFECTIVE HYDRAULICS.

EMPOYEE HIT HIS THUMB WITH A HAMMER CAUSING HIS SKIN TO SPLIT OPEN. HIS SKIN WAS VERY CALLOUSED AND DRY. HIS INJURY REQUIRED HIM TO HAVE STITCHES.

EE WAS CLEANING MUD FROM A TAIL SECTION ON A CONVEYOR. THE CONVEYOR HAD STOPPED DUE TO EXCESSIVE RAIN AND MUD ON BELT. WHILE EE WAS STANDING AT REAR OF CONV. MUD SLID DOWN THE BELT. THE MUD PI LED UP AROUND THE CALVES OF THE EE. EE THEN TWISTED HIS KNEE WHEN HE TURNED.

WHILE TIGHTENING A BOLT ON A 6" WATER LINE, WRENCH SLIPPED OFF AND EMPLOYEE STRUCK ELBOW ON PIPE.

EE BURNED HIS RIGHT PALM WHEN HE ACCIDENTALLY PUT HIS HAND DOWN ON A PIECE OF HOT METAL THAT HE HAD JUST PREVIOUSLY CUT WITH A CUTTING TORCH.

EMPLOYEE WAS ENTERING LOADER CAB WHEN HE LEFT A PULL IN HIS GROIN AREA.

EMPLOYEE STEPPED OFF FROM A WORK PLATFORM 6 FEET ABOVE THE GROUND ON A PORTABLE SCREENING PLANT. HAND RAILS WERE MISSING ON THE PLATFORM.

EMPLOYEE HAD JUST FINISHED A REPAIR ON A CONVEYOR. A FRONT END LOADER WAS BEING USED TO SUPPORT A SECTION OF THE CONVEYOR WHILE THE EMPLOYEE WELDED IT TO THE REST OF THE FLAME. THE EMPLOYEE WAS USING THE MAIN CONVEYOR SECTION AS A WORK PLATFORM (SEE ATTACHED).

EMPLOYEE SLIPPED ON ICE IN MILL AREA WHILE CLEANIN GUP AT THE END OF HIS SHIFT. WORK AREAS HAD BEEN SANDED HOWEVER THIS PARTICULAR AREA HAD NOT.

EE WAS GRINDING A DRILL BIT WHEN DEBRIVE FLEW INTO EE EYE. THE EE WAS WEARING SAFETY GLASSES AND FACE SHEILD. A PRESCRIPTION WAS GIVEN TO EE WHICH MADE IT REPORTABLE NO SCHEDULED WORK ON 12-24 -93.

EMPLOYEE SLIPPED ON THE ICE AND STRAINED HIS RIGHT KNEE.

EMPLOYEE WAS SHARPENING A BIT FOR THE DRILL RIG WHEN A PIECE OF RUST BECAME IMBEDDED IN HIS EYE. THE EMPLOYEE WAS WEARING SAFETY GLASSES AT THE TIME. NO FACE SHIELD. EMPLOYEE WAS GIVEN PRESCRI PTION EYE DROPS TO PREVENT INFECTION.

EMPLOYEE WAS USINGA PRESS TO PRESS A SHAFT OUT OF AN IMPELLER. WHEN THE PRESS SLIPPED CAUSIGN THE STAND TO KICK OUT AND HIT THE EMPLOYEE'S LEG.

EMPLOYEE STOCKPILES MATERIAL W/ ON 85 TON HAUL TRUCK. HE ROLLED DOWN HIS WINDOW IN HIS AIR CONDITIONED CAB FOR A REASON UNKNOWN TO HIMSELF AND GOT DUST IN HIS EYE. EMPLOYEE REPORTED THE INCI DENT HTE FOLLOWING DAY WHEN HIS EYE WAS INFLAMED AND SWOLLEN.

EMPLOYEE WAS MANUALLY MOVING THE FRAME WORK FOR THE TIRE ASSEMBLY ON A RADIAL STACKER.

EMPLOYEE SLIPPED WHILE WELDING ON A LOADER BUCKET. EMPLOYEE THEN FELT SOME PAIN IN HIS LOWER BACK.

WHILE LIFTING A BODY CABLE FOR A HAUL TRUCK EMPLOYEE STRAINED RIGHT ELBOW.

EMPLOYEE COMPLAINED OF BACK PAIN AFTER CARRYING A CONTAINER OF GREASE UP A SET OF STORIES. EMPLOYEE SHOULD HAVE USED A CRANE, WHICH WAS IN THE AREA.

EMPLOYEE CUT HIS LEFT KNEE WHILE ATTEMPTING TO CUT SOME CONVEYOR BELTING W/A RAZOR KNIFE

54736YEE SLIPPED AND BANGED HIS ELBOW WHILE REPAIRING A CRACK INSIDE A CONCRETE CATCH BASIN. EMPLOYEE IS ABLE TO PREFORM DUTIES AS NORMAL.

55061S IN THE PROCESS OF REPLACING A DAMAGED AIR HOSE LEAD ON AN AIR ARC WELDER WITH THE POWER ON HE REMOVED THE RUBBER INSULATOR WITH IT LAYING ACROSS HIS LAP HIS KEYS MADE CONTACT WITH THE L 51403OMPLETING THE CIRCUT THE EE BURNED HIS HAND

54736YEE SLIPPED W/A RAZOR KNIFE WHILE CUTTING CABLE ON A WIRE FEED WELDER CUTTING HIS PALM.

54736YEE STRAINED HIS BACK WHILE CLIMBING INTO A KID STEER LOADER.

EMPLOYEE FELT PAIN IN GROIN AREA WHILE LIFTING AN 8'X2"X4" PIECE OF LUMBER.DIAGNOSIS LOWER ABDOMINAL MUSCLE STRAIN EMPLOYEE LOST NO TIME UNTIL 07-07-92 AND ONLY STARTED LIGHT DUTY 06-26-92.

WHILE PULL STARTING AN AIR COMPRESSOR THE ROPE BROKE CAUSING CONTACT BETWEEN EMPLOYEES FINGER & A PIECE OF SHEET METAL EMPLOYEE CUT RT RING FINGER REQUIRING STITCHES EMPLOYEE IS STILL ABLE TO PREFORM HIS JOB W/O LIMITATION

EMPLOYEE BANGED HIS KNEE ON A METAL OBJECT LYING ON A CATWALK WHILE MAKING A REPORT ON A CONVEYOR EMPLOYEE RECEIVED STITCHES IN HIS LEFT KNEE EMPLOYEE IS THE PRIMARY CRUSHER OPERATOR SO NO RES TRICTED WORK ACTIVITY WAS NECESSARY

EMPLOYEE WAS WORKING ON A HYDRALIC FITTING AND FAILED TO TIE BACK THE HOSE. HE BUMPED THE HOSE CAUSING IT OT SWING AROUND STRIKING HIM IN THE MOUTH. EMPLOYEE RECEIVED A FAT LIP AND THE DOCTOR ENDED UP PULLING ONE OF HIS FRONT TEETH.

EMPLOYEE WAS HITTING A PC OF 6IN PRC W/SLEDGE HAMMER PVC SHAT TERED HITTING EMPLOYEE IN EYE EMPLOYEE WAS NOT WEARING SAFETY GLASSES AT THE TIME OF INCIDENT HOWEVER EMP IS NORMALLY NEVER SEEN W/O SAFETY GLASSES

EMPLOYEE TRIPPED ON A ROCK & FELL INJURING HIS FINER

EE TANGLED HIS FOOT IN A HOSE HE WAS USING WHILE DECENDING A LADDER THIS CAUSED EE TO LOSE HIS FOOTLING AND MISS THE BOTTOM RUNG OF THE LADDER.

WHILE OPERATING THE SKID STEER LOADER, EMPLOYEE DROVE UP ONTO A ROCK CAUSING MACHINE TO BUMP INTO A CONV. FRAME JARRING EMPLOYEE. EMPLOYEE COMPLAINED OF BACK PAIN AND WAS INSTRUCTED TO SEE A P HYSICIAN.