Buscar en el registro

Haul truck driver got out of truck to track a conveyor belt was using a hammer to hit return roller bracket got EE's hand sucked through return roller. Lost fingernail & scraped up hand was result.

Miner was tightening track frame bolts on an excavator. Pinched thumb between the ratchet and track frame causing a laceration which required 7 stitches.

Assisting mechanic repairing haul truck. Loosening a bolt, slipped, and cut right index finger. Three stitches required.

Employee was handling a 4x4 dunnage and got a wood splinter in the palm of right hand. Employee pulled out splinter, but may not have gotten the entire splinter out. A week later employee went to doctor with what appears to be an infection the area.

We had a hose failure outside the back of the cab of our DM45 drill that broke out corner of cab window and sent some small glass fragments into the right cheek area and left forearm of the drill operator.

The individual was using a track drill on some boulders to make room for our new tunnel and while drilling was struck on the ankle/heel with a rock from drilling area.

Cone feed belt was jammed so EE removed the guard after locking out and EE dug the rocks out of the tail pulley. It freed the stuck belt up and it rolled backwards catching EE's pry bar and EE's right hand.

Individual was exiting cab of P&H crane and caught right foot in the process of climbing down and then fell to the ground.

Individual was a mechanic that was trying to loosen a nut on piece of equipment and EE's forefinger got between hammer and wrench causing injury.

Individual was fueling up D8 Dozer and finished fueling and was climbing down from dozer with fuel hose in hand and slipped and fell.

Employee was driving GMC fuel truck down haul road when cab locking mechanism failed and cab tilted forward and hit the ground while moving and driver used brakes to stop truck. Driver was wearing seatbelt.

Conditions were clear & cold w/below freezing temps @27 degrees. Subject reached overhead to pull slack out of come-a-long and his footing slipped and fell backwards with hard hat falling off. As come-a-long came unattached hitting subject in head.

Was working overhead with a grinder & welder. Debris from grinding on forehead and when individual stood up, it worked it's way into subject's eyes behind his safety glasses.

EE was installing new screens on screen #5 and reached out to grab a new screen and his feet slipped and his mid section landed against the spray bar.

Doing belt work cutting with a box knife.

Rock falling from elevated area struck miner below.

Cut finger on rock when snapping a shot.

Employee was drilling short holes; centralizer latch popped out of place so driller kicked it back into place with the heel of his left foot, resulting in a torn Achilles tendon.

Thw worker was washing the truck scale after starting the power washer he climbed over to the side of the scale and fell to the ground.

USING A COMEALONG TO PUT IN A RETURN ROLLER. COMEALONG SLIPPED AND HIT EE IN THE NOSE.

EMPLOYEE POSITIONED LADDER TO ASSIST IN CRUSHER JAM MAINTENANCE LADDER SLIPPED THROWING EMPLOYEE AGAINST DIE BLOCKS INJURING RIGHT RIB CAGE EPLOYEE SOUGHT OWN MEDICAL ATTENTION.

A EUCLID WATER TRUCK WAS BEING USED TO WATER THE HAUL ROAD LEADING TO THE UPPER PLANT WHEN IT STALLED, ROLLED BACKWARD INTO A BERM & OVERTURNED. THE DRIVER OF THE WATER TRUCK STATED HE BECAME VERY EXCITED & REMOVED, SEATBELT, JUMPED FROM THE TRUCK. HE SUSTAINED SERIOUS INJURIES TO SHOULDER, WRIST & ANKLE.

I WAS GOING DOWN THE HALLROUD AT THE END OF THE DAY CAME AROUND THE CORNER AND A DUMP TRUCK WAR COMEING UP ON ME SIDE OF THE ROAD TRIED TO GO AROUND THE OTHER SIDE AN DHIT THE FRONT OF THE TRU CK.

AUGER ON TRUCK CLOGGED UP. DRIVER UNCLOGGED IT AND WAS SWEEPING THE AN AWAY FROM THE DOOR WHEN THE AUGER STARTED UP. IT CAUGHT HIS GLOVE AND PULLED IT AND HIS HAND TOWARD THE AUGER. EMP GOT CU TS AND A PUNCTURE WOUND FROM THIS.

EE TRIED TO DRY HIMSELF USING A WEEDBURNER. HIS COVERALLS CAUGHT FIRE. EE BURNED HIMSELF, CAUSING INJURY TO 30% BACK OF BOTH LEGS (1ST-2ND DEGREE BURNS)

SLIPPED & FELL STRIKING R KNEE ON BOLT.

WHEN STARTING 1300 JOY AIR COMPRESSOR SMALL CLUNK OF LOOSE DEBRIS FLEW INTO LEFT EYE.

USING DIE GRINDER WITH A SANDING DISC CLEANING RUST AND BEARING BORE FOREIGN OBJECT GOT IN LEFT EYE.

DRIVER DETERMINED THAT ELECTRA HAUL (OFF ROAD TRUCK) WAS IN DANGER OFF OVERTURNING ON AN INCLINE. THE DRIVER THEN JUMPED FROM THE TRUCK-LANDING ON THE GROUND-CAUSING SHOULDER INJURY-TRUCK DID NOT OVERTURN, CAME TO COMPLETE STOP.

BREAKING OUT ROCKS FROM GIZZLY BARS WITH SLEDGE HAMMER ROCK CHIP BROKE OFF STRUCK RIGHT EYE CAUSING SWELLING BLURRED VISION SWELLING TORE RTINA CAUSED BLEEDING ON INSIDE OF EYE.

BACKING UP DRILL CABLE CAUGHT THE TRACKS SNAPPED BACK HITTING ACCROSS THE THROAT

EE TRIPPED OVER A ROCK AND FELL DOWN DISLOCATING HIS LEFT THUMB.

EMPLOYEE WAS USING A 12LB SLEDGE TO HAMMER A PUNCH THROUGH A PIECE OF RUBBER BELTING TO HANG BELT IN THE SCALPER. THE SLEDGE MISSED THE PUNCH AND SQUARCH, HIT THE THUMB AND INDEX FINGER OF H IS LEFT HAND.

ROCK FELL FROM HOPPER,HIT RIGHT SHOULDER CAUSED SWELLING MISSED 1 DAY OF WORK.

MOVING TRACK DRILL IT JUMPED AND LANDED ON RIGHT FOOT.

LLEANED UP TO JACKS WITH HAND UNDER I BEAM USED JACKS I BEAM SLIGHTLY STACK ASND WHEN BUMPED IT DROPPED ON FINGER

EMPLOYEE WAS WORKING ON CONVEYOR DOING SOME CUTTING WHEN HE PUT HIS ARM ON A HOT SPOT.

THE EMPLOYEE WAS OPERATING THE JAY DRILL AT THE TIME OF THE ACCIDENT. THE OPERATOR HAD INCREASED THROTTLE ON THE COMPRESSOR WHEN THE DRILL STARTED TO BACKUP AND JACK KNIFED. THE OPERATOR TRI ED TO SHORT CUT BETWEEN THE COMPRESSOR AND THE DRILL TO ADJUST THE PROPELL LEVER. WHEN CROSSING BETWEEN THE EUQIPMENT THE EMPLOYEES FOOT WAS TRAPED BETWEEN THE DRILL TRACK AND THE COMPRESSOR

I.NAME SAID HE CLIMBED DOWN THE BANK OFF OF THE 700 LEVEL TO LOOK FOR SOME BULL HOSE. ON HIS WAY BACK UP HE ROLLED OFF A ROCK AND THREW OUT HIS HIP.