Buscar en el registro

THE EMPLOYEE WAS THROWING CLINKER CHUNKS OFF THE B-MILL FEED BIN GRISLEY. AFTER THE EMPLOYEE HAD GONE HOME HIS BACK TENSED UP.

EMPLOYEE WAS LOADING AN ENGINE STAND INTO THE BACK OF A PICKUP AT THE GARAGE HIS FINGER WAS PINCHED BETWEEN THE STAND & A DRUM THAT WAS IN THE BACK OF THE TRUCK STITCHES WERE REQUIRED

EMPLOYEE WAS USING A COMBINATION 11/4" TO LOOSEN FLANGE BOLTS ON A 6" TRANSPORT LINE ON TOP OF THE A SILOS BOX END OF THE WRENCH SLIPPED ON THE NUT & THE OPEN END OF THE WRENCH STRUCK THE EMPL OYEE THE RESULTING CUT REQUIRED 5 STITCHES

IN WALKING FROM THE MIX LAB TO THE PHYSICAL TEST LAB THE EMPLOYEE STEPPED OFF INTO A FROZEN SET OF LOADER TIRE TRACKS THE EMPLOYEE TWISTED HIS ANKLE AS HE STEPPED INTO THE UNEVEN GROUND

SUPERVISOR WAS ATTEMPTING TO INSPECT FOR A SLURRY LEAK AT KILN FEED INLET HE STEPPED UP ONTO A HANDRAIL & THEN BACK TO THE CATWALK STEPPING ONTO A PIPE LAYING ON THE CATWALK NO ACCIDENT WAS RE PORTED & THE DOC FIRST REPORT WAS RECEIVED 030789

THE EMPLOYEE WAS CLEANING OUT DUST FROM THE KILN DUST SCOOP HOUSING WHEN SOME HOT DUST FELL ONTO HIS HAND.

THE EMPLOYEE WAS USING APORTABEL STEAM CLEANER TO WASH DOWN THE COAL MILL GEAR BOX WHEN HE LOST HIS BALANCE AND ENGAGED THE WAND.THE WAND WHIPPED ACROSS THE EMPLOYEE'S FOOT WITH HIGH PRESSURE WATER.

THE EMP WAS CLIMBING UP THE LADDER OF A LOADER HIS FEET WERE WET AND THE EMP SLIPPED AND FELL TO THE GROUND.

THE EMP WA USING A HAMMER A(D HAD A SPLINTER FORM THE HANDLE LODGE IN HIS PALM. TO REMOVE THE SPLINTER THE DOCTOR LACERATED THE PALM AND REQ. 2 STICHES. TO CLOSE.

THE EMPLOYEE WAS MAKING A LINE CHANGE AT THE #5 SILO.AS HE STEPPED OVER THE 6" TRANSPORTLINE HE TRIPPED AND TWISTED HIS LEG.

EMPLOYEE WAS OPERATING A 721 BOBCAT ON KILN DECK HE WAS DRIVING TO THE NORTH SIDE OF THE DECK & DUMPING BRICK FROM DECK TO THE GROUND 16FT BELOW ON THIRD BUCKET THE LOADER PITCHED FOREWARD & F ELL OFF THE DECK

EMPLOYEE WAS CLEANING BICK OUT OF THE KILN WHEN HE WAS HIT ON THE KNEE BY ONE

THE EMPLOYEE WAS CLEANING CEMENT OFF THE TRUCK SCALE WHILE SHOVELING THE CEMENT INTO A GONDOLA THE EMPLOYEE EXPERIENCED PAIN.BY 06/06/88 THE PAIN HAD INCREASED AND THE EMPLOYEE WENT TO A DOCTO R.

EMPLOYEE WAS ASSISTING IN REMOVING CHUNKS FROM THE #1 COOLER BAGHOUSE AS HE REACHED IN TO REMOVE A CHUNK ANOTHER CHUNK FELL AND STRUCK HIM IN THE BACK OF THE HEAD THE FORCE OF THE IMPACT DROVE THE EMPLOYEES FACE DOWN INTO A METAL BRACE

THE EMPLOYEE LIFTED A TIRE TO PLACE ONTO A TIRE RACK AND EXPERIENCED PAIN WHILE LIFTING.

THE EMPLOYEE WAS REMOVING BROKEN 94 LB. SACKS FROM A PALET AND REPLACING THEM WITH NEW ONES.NO REPORT MADE UNTIL 04/19/88.INVESTIGATION RESULTED IN REPORT BEING FILED ON 05/04/88.

THE EMPLOYEE WAS HAMMERING ON THE CRUSHER BREAKER PLATES WHILE ASSISTING THE REPAIRMEN. A METAL CHIP STRUCK THE EMPLOYEE IN THE RIGHT EYE.

EMPLOYEE WAS WA5KING TO HIS WORK AREA WHEN HE SLIPPED & FELL ON ICE BY THE MACHINE SHOP

THE EMPLOYEE WA8 USING A JACKHAMMER IN THE KILN COOLER DUCT WHEN THE JACKHAMMER STRUCK THE INSIDE OF THE EMPLOYEE'S LEFT FOOT.

EMP WAS SHOVELI3G AT THE COAL UNLOADER. WHILE SHOVELING THE EMP WALKED ONTO THE GRIZZLY AND FELL THROUGH AN OPENING WHERE A BAR WAS MISSING. EMP FELL STRIKING HIS LEFT SIDE

THE EMPLOYEE WA8 WORKING AT THE B2 FLUXO PUMP ATTEMPTING TO CLOSE THE INLET CHUTE WITH A SIDE BLIND.IN USING A SLEDGE HAMMER TO DRIVE THE BLIND IN, THE EMPLOYEE MISSED, STRIKING HIS RIGHT THU MBNAIL ON THE B5IND.THE NAIL WAS TORN OFF.

THE EE WAS CHOV9LING UNDER THE #207 CONVEYOR BELT. THE EE STATED THAT AS HE WAS SHOVELING HE STARTED TO NOTICE SOEM PAIN & AFTER A WHILE THE PAIN BEGAN TO GET WORSE.

EMPLOYEE WAS MO6NTING A RAIL CAR WHEN HE SLIPPED ON THE GRAVEL & FELL STRIKING HIS KNEE STITCHES WERE REQUIRED

EMPLOYEE DISLOC5TED HIS LEFT SHOULDER AS HE WAS CLIMBING OFF A SPRING CONVEYOR BELT ON A PACKING MACHINE EMPLOYEE FELT HE COULD CONTINUE TO WORK & DISLOCATED HIS SHOULDER AGAIN IN ATTEMPTING T O PLACE 94LB SA7KS OF CEMENT ONTO PALLETS

THE EMPLOYEE EN7ERED INTO THE FENCED AREA AROUND THE OVERLAND BELT DRIVE MOTORS WHILE THE BELT WAS IN OPERATION.WHILE STANDING NEAR THE MOTORS HIS FOOT SLIPPED INTO A BROKEN PART ON THE SOUTH MOTOR GEARBOX.T2E PART WAS SPINNING ON A SHAFT AT A HIGH SPEED AND STRUCK THE EMPLOYEE'S FOOT.

EMP WAS USING E4ERY CLOTH TO POLICH A SHAFT THAT WAS TURNING ON A LATHE. THE EMERY CLOTH SLIPPED AND CUT THE EMPLOYEES RIGHT PALM AND MIDDLE FINGER REQUIRING STITCHES

THE EMPLOYEE WA8 DESCENDING THE STAIRWAY FROM THE MIX TANKS WHEN HE LOST HIS FOOTING AND FELL.

EMPLOYEE WAS MO5ING A PORTABLE VACUUM UNIT TO #207 BELT WITH A YARD TRACTOR AS EMPLOYEE DROVE DOWN HILL TRACTOR LOST TRACTION & JACK-KNIFED EMPLOYEE JUMPED FROM TRACTOR & HIT THE GROUND

THE EMPLOYEE HA8 PLACED A 55 GAL DRUM OF OIL ONTO A RACK WITH A FORKLIFT AND THEN DISMOUNTED TO CHECK THE POSITION OF THE DRUM. HE FAILED TO LOWER THE FORKS OR TO SET THE PARK BRAKE AND WAS KN OCKED INTO THE 8RUM WHEN THE FORKLIFT ROLLED FOWARD.

THE EMPLOYEE WA8 CHANGING OUT DUST COLLECTOR BAGS AT THE KILN DUST COLLECTOR WHEN HE GOT LIME DUST IN HIS EYES. THE EMPLOYEE WENT ON WORKING UNTIL THE END OF THE DAY AND ONLY AFTER WORK ENDED DID HE SEEK TO 2AVE HIS EYES CLEANED AT THE DR.

THE EMPLOYEE WA8 ASSISTING WITH REPAIRS ON THE DRILLMASTER. AS HE DISMOUNTED THE EMPLOYEE STEPPED ON A ROCK AND TWISTED HIS KNEE.

THE EE WAS REMO5ING A BRAKE SHOE FROM THE 400 LOADER. IN USING A DRIFT PUNCH HAMMER A METAL CHIP SPLINTER STRUCK EES RIGHT ARM.

EMPLOYEE WAS RE4OVING A SWEEP FROM THE #3 TANK WHEN THE SWEEP CAME LOOSE AND HIT THE EMPLOYEE ACROSS THE SHINS

EMPLOYEE WAS PL5CING 94 LB CEMENT SACKS ONTO PALLETS HE GRABBED THE SACK IMPROPERLY AND TWISTED HIS BACK

EMPL SLIDING HA3D ALONG HANDRAIL ON LOADER AND SNAGGED SHARP BURR.

THE EMPLOYEE WA8 WORKING INSIDE THE B-2 MILL SEPERATOR, CLEANING OUT CEMENT CHUNKS. A CHUNK OF CEMENT FELL AND STRUCK THE EMPLOYEE IN THE FACE. SOME ENTERED INTO HIS EYES.

THE EE WAS THRO4ING 94# CEMENT SACKS ONTO PALLETS WHEN HIS FOOT BROKE THRU A PALLET & CAUSED THE EE TO BE THROWN OFF BALANCE. THE RESULTING TWISTING WHILE TRYING TO DROP THE SACK RESULTED IN THE EE SUFFER3NG THE INJURY.

EMP WAS IN THE 1ROCESS OF ATTACHING A TOW CABLE TO THE FRONT OF A PICK-UP TRUCK. WHEN THE EMPLLYEMPLOYEE BENT OVER TO ATTACH THE CABLE HE FELT PAIN

EE WAS WORKING 3N THE RAW MILL BALL COMPARTMENT WHEN A METAL CHIP FORM THE BALL LOAD POPPED & STRUCK HIM.

EMPLOYEE WAS IN8PECTING THE INLET TO THE RAW MILL WHILE LOOKING THROUGH THE INSPECTION HOLE THE METAL COVER FELL AND STRUCK HIM ON THE LEFT HAND EMPLOYEE WAS WEARING GLOVES

EMP REPORTED FO9 WORK ON 2/18/86 AND SAID HE HAD STARTED FEELING PAIN AFTER HE LEFT WORK ON 2/14/86. AFTER WORKING ONE HOUR ON 2/18/86 HE WENT TO THE DR, AND RETURNED TO WORK ON 2/19/86. ON 3/ 5/86 HE WENT TO3THE DR STATING TAT THE PAIN WAS INCREASING, THE DR IS UNABLE TO FIND ANYTHING WRONG BUT IS NOT GOING TO RELEASE HIM TO WORK

THE EMPLOYEE WA8 ROLLING UP A 21/2 INCH AIR HOSE AND FELT PAIN.

PULLING DISS TO3 TUNNEL 1 STEPPED OVER TUNNEL & DOWN ON HALF METAL & SOFT CEMENT FELL DOWN & TWISTED ANKLE.

HOOKING CABLE T2 RAW MILL TO TURN THE MILL AND IT CAUGHT THE TIP OF HIS GLOVE. HE TOLD THE HOIST OPERATOR TO LOWER CABLE AND HIT THE WRONG BUTTON AND PULLED HIS GLOVE AND FINGER INTO THE HOOK SHEAVE. 3

EMPLOYEE WAS CH5NGING A WINDSHIELD ON THE 530 LOADER. WHEN HE STEPPED FROM THE LOADER BOOM ONTO THE RIGHT FRONT TIRE HE LOST HIS FOOTING AND FELL TO THE CONCRETE.

EMP WAS INSTALLING A RAWMILL MANHOLE COVER WITH THE HELP OF A CRANE. AFTER UNHOOKING FROM THE MANHOLE COVER THE CRANES HEADACHE BALL STRUCK THE EMPLOYEE

TRANSFERRING COAL FROM STORAGE TO COAL HOPPER SLIPPED ON CLINKER & FELL ON COAL BELT LINE

EMP WS PLACING 94 LB. CEMENT SACKS ONTO PALLETS WHEN FELT PAIN

CLEANING STARTERS ON #2 KILN #4 ELECTRICAL CONTROL ROOM SCREW DRIVER SLIPPED AND HIT HOT CONNECTION WHILE PUSHING STARTER IN.

WHILE REPAIRING THE COAL MILL, A GUST OF WIND BLEW DUST INTO THE EMPLOYEE\S EYE.