Buscar en el registro

Volvo 330 was tracking from new shot to medium stone fill to load a sales truck. Euclid End Dump sitting 5/10 min, was radioed to move forward to let truck through. Euclid backed into cab of Volvo 330 crushing cab, broken windows, broken door. Operator of Volvo was able to jump out of equipment (was not injured). Operator of Euclid was suspected on being phone distracted.

Hearing test were conducted on 4/22/25. Hearing Test results received 4/29/25: Left ear has moderately severe hearing loss at some high frequencies. Required placement on MSHA log

Loader operator was backing away from stockpile & was looking behind self and tire went in a rut and the way EE's body was turned & when EE hit the rut it tweaked EE's back.

Switch gear shorted out and caught fire that was being fed by Cat 3512 genset. Fire lasted longer than 30 min so contacted 1-800-746-1553 Immediately reportable accidents, Called field office too. MSHA on site in 20 min. No injuries

Walking back from porta-john and slipped on ice and hurt left knee.

Was rechaining crusher rotor during removal when the victim put weight on the rotor and it turned pinning left leg between rotor and frame.

During plant repairs, injured person removed a metal guard and set it aside. The guard tip over and hit above the metal toe on his right foot. This caused a break in the foot. Tried to keep working but foot began to swell with discomfort. Went to walk in clinic.

Stepped from one loader platform to next to clean his windows and rolled his ankle.

Tightening bolts on jaw crusher and felt knee strain.

When drilling, the driller needs to lift drill rods an place on drill mast to add length, when driller was doing this he felt what he thought was a muscle "tweek". This feeling did not improve, went to doctor and found out he had a hernia.

Tightening bolts under screen when wrench slipped off and hit back of right hand on piece of metal. Sprained back of hand and broke 3rd finger.

Wheel crusher had a small rock lodged in it. Put a spanner wrench on main shaft to spin backwards. EE pulled on wrench and wrench slipped off. He fell backwards into crusher upright support and hurt his back side. Doctor gave him medication which made him drowsy.

Changing a screen. Prying old screen up and bar slipped and handle struck just above right eye. 1" gash required 3 stitches to close.

86 Mack cabover carrying solaire air compressor for drill, air compressor caught fire, took nearly 30 min to put out, fire department was involved, no injuries. Two employee's from Givelich Explosive were just starting to drill shot when air compressor caught fire.

Rosk wedged in bottom of hopper door vibrating Grizzly Feeder. One employee was hitting the rock with sledge hammer and a piece of rock broke off and hit another employee in the eye standing adjacent on catwalk causing damage to right eye. Had PPE off to wipe eyes.

Cold steel, employee climbed on top of jib laying on a crusher wheel on the ground to hook a shackle to it. Standing 3-5' off ground and slipped and fell backwards landing on a rock. Broke rib, puntured lung, & fractured 3 vertabrae.

Stepping up ladder into Wabco haul truck BD13, when foot slipped on rung. Right knee struck step and ground. Employee had a pre-existing condition with this knee.

EMPLOYEE PERFORMING PRE-SHOT INSPECTION IT WAS MUDDY AND DARK. THE MUD STUCK TO HIS BOOT AND WHEN HE WENT TO MOVE, HE FELL ONTO A POINTED ROCK ON HIS LEFT SIDE OF HIS UPPER CHEST.

CHANGING CAGE ON WHEEL CRUSHER. WHEN TO PULL LAST BOLT FROM HUB ON OLD WHEEL AND DID NOT HAVE CRANE ATTACHED TO TOP OF WHEEL TO IMMOBILIZE IT. WHEEL TURNED WHEN RELEASED AND PINCHED EE'S LOWE R LT. HAND BETWEEN WHEEL-CAGE AND HUB AND IMPACTSOCKET. CRUSHED LITTLE FINGER AND LOWER HAND.

CAME INTO WORK, WALKED PAST CONTROL ROOM AND TRIPPED OVER ELECTRIC CABLE TO CRUSHER AREA. FELL FORWARD AND USED LEFT ARM TO PREVENT FALL. BROKE BONE IN LEFT FOREARM.

HELPING MOVE CRUSHER WHEEL INTO POSITION, WHEN TWISTED RIGHT KNEE. INJURY BECAME INFLAMED A FEW DAYS LATER.

FELL OFF OF SOME STEPS 5 FT TO THE GROUND.

EMPLOYEE WAS GETTING OFF A PIECE OF EQUIPMENT. HE SLIPPED ON MUD ON TRACKS AND FELL TO THE GROUND.

HE WAS HOSING OFF UNDER CONVEYOR BELT WHEN A LARGE ROCK FELL OFF THE CONVEYOR HITTING HIS LEFT KNEE.

WELDING A LOADER BUCKET IN A TIGHT LOCATION. STICK WELDING, BENT WELD STICK TO GET IN TIGHT LOCATION. REACHED INTO START WELDING BEFORE SHIELD CAME DOWN AND TOUCHED OTHER STEEL AND ARCH BURNED HIS EYES.

EE WAS USING A PRY BAR, ATTEMPTING TO DISLODGE AN OVERSIZED ROCK FROM THE FEEDER, WHEN PRY BAR SLIPPED & EE FELL BACKWARDS OFF OF CATWALK.

HE WAS PULLING ON A WRENCH TO TIGHTEN THE MOTOR ON THE SCREEN DECK AND PULLED HIS LOWER BACK, RUPTING TWO DISKS IN HIS BACK.

HE WAS COMPLAINING OF LOWER BACK PAIN AND SAID IT WAS FROM DRIVING AN OFF ROAD BACK DUMP TRUCK.

EMPLOYEE WAS GETTING OUT OF HIS PICKUP TRUCK TO OPEN GATE TO PIT. HE SLIPPED ON SNOW AND FELL WITH RIGHT LEG TWISTED UNDER HIM. DISLOCATED KNEE , REQUIRED SURGERY.

EMPLOYEE WAS INFLATING LOADER TIRE. TIRE EXPLODED SPRAYING EMPLOYEE WITH GRAVEL IN FACE, NECK & LEGS.

CLEANING GREASE FROM DRAGLINE BELT. RAG CAUGHT IN DRAGLINE BELT TWISTING FINGER.

OPERATING CRUSHER FROM SEAT IN CONTROL TRAILER. STOOD UP AND GRABBED DOOR FRAME. WIND CAUGHT DOOR AND DOOR SLAMMED SHUT ON HAND.

TIGHTENING BOLTS ON CRUSHER. BACKED UP AND HIT SHOULDERS ON BIG PIECE OF ANGLE IRON.

CLIMBING UP ON LOADER TO CHECK OIL-1 FOOT ON TIRE & 1 FOOT ON STEP- HE FELL & FOOT GOT STUCK IN STEP TWISTING KNEE.

FELL FROM TOP OF LOADER WHEN GETTING OUT.

BREAKING DOWN TIRE ON 988 LOADER--HYDRAULIC BEAD BREAKR CAME LOOSE & HIT HIM IN THE RIBS.

EE WAS TAKING ROCKS OUT OF GRIZZLEY. THEY SHIFTED AND A ROCK SMASHED HIS HAND.

MOVING A TAIL PULLEY FOR CRUSHER-HURT BACK.

HE WAS CLIMBING INTO LOADER- HIS FOOT SLIPPED AND HE TORE HIS SHOULDER.

GREASING CONVEYOR BELTS-STEPPED ON A BOARD WHICH BROKE AND HE FELL.

RUNNING A BUCKET LOADER HE JUMPED OFF AND HURT BACK.

WORKING AROUND CRUSHING PLANT GOT HIS IN SHOULDER WITH ROCK.

UNLOADING SCREENS SCREEN SLIPPED HIT FACE