Buscar en el registro

SCREEN PANEL PINCHED EMPLOYEE'S FINGER BETWEEN A PANEL AND THE SIDEWALL.

FIXING ROLLERS AND SURGE BELT CONVEYOR; WHEN GETTING OFF CONVEYOR. EMPLOYEE JUMPED DOWN AND LANDED WRONG ON MY LEFT ANKLE.

WHEN HELPING WELDER, EE WAS FLASHED WHEN WELDER STRUCK ARC.

WHILE SHOVELING WET SALT EMPLOYEE STRAINED AMUSCLE IN THE RIGHT LOWER GROIN.

IN THE PROCESS OF REMOVING A BOLT WITH AN IMPACT WRENCH, THE BOLT BROKE AND THE HANDLE OF THE BREAKER BAR RELEASED AND HIT THE EMPLOYEE IN THE MOUTH, BREAKING TWO TEETH.

WHILE REMOVING A ROCK, HE STOOD UP ON THE CONVEYOR AND HIS GLOVE CUFF GOT CAUGHT IN CONVEYOR PULLEY ABOVE AND TWISTED HIS ARM AROUND INJURING HIS ELBOW.

LIFTING CHUTE FOR PLANT, PULLING MUSCLE IN BACK.

EE WAS WALKING ON INCLINE CONVEYOR BELT THAT WAS COVERED WITH SNOW - HE SLIPPED AND FELL OFF CONVEYOR STRIKING ANGLE IRON ON THE WAY DOWN.

WHILE CLEANING OUT MATERIAL BINS, SOMETHING SNAPPED IN HIS ARM (WRIST).

WHILE WORKING ON PLANT CONVEYORS AND DOING OTHER PLANT MAINTENANCE, STRAINED MUSCLES WHILE LIFTING AND WRENCHING.

EMPLOYEE FELL ON A PIPE WHEN STEPPING OVER IT.

PULLING OUT A PIECE OF WOOD FROM UNDER A PIECE OF STEEL AND IT FELL OVER AND WEDGED FINGER BETWEEN WOOD AND CONCRETE.

EMPLOYEE CLIMBED UP ON CONVEYOR PLUGGED IN POWER CORD TO MOTOR(POWER WAS ON) CONVEYOR BEGAN MOVING EMPLOYEE STRUCK SHIN ON METAL PLATE

EMPLOYEE SLIPPED ON A BELT AND FELL.

BLACK ICE IN THE YARD. EMPLOYEE FELL ON THE BLACK ICE HITTING HIS KNEE ON A PICK-UP FENDER.

COMING DOWN LADDER AT SPLITTER BOX ON PLANT AND FELL ABOUT 3 FT. INJURED LEFT HIP AND LOWER BACK.

SLIPPED IN MUD WALKING OUT BY WASH SCREENS.

WOOD PLANK WAS PLACED IN CHUTE TO STOP STONES FROM ENTERING CRUSHER & A LARGE STONE HIT PLANK & PLANK HIT EE CAUSING HIM TO FALL ON CATWALK.

WHILE SHOVELING DURING DAILY MAINTENANCE, MR ROBERTS HEARD A SNAP IN THE CHEST.

EMPLOYEE WAS LIFTING HEAVY GRATES, PULLING & SHOVELING (CAUSING MUSCLES TO BE PULLED).

WHILE WORKING IN SHOP, EMPLOYEE HURT BACK WHILE COVERING A PALLET.

EMPLOYEE SHOVELING UNDER THE 7' CRUSHER DISCHARGE BELT.

68935 MAKING A VOLTAGE CHECK AT THE PANEL, THE TEST PROBES SHORTED CAUSIGN AN ELECTRICAL BURN TO THE HANDS.

DRIVING PAYHAULER AND HIT A BIG HOLE IN THE DRIVEWAY.

EMPLOYEE WAS CLIMBING DOWN OFF OF THE CRUSHER AND STEPPED ON A SAND PILE WHILE TURNING LEFT,TURNED 360 DEGREES AND FELL ON HIS BACK ONTO A ROCK.JUST AFTER CLIMBING OUT OF THE HOPPER OF THE CRS UHER,HE FELT A SHARP PAIN ON HIS LEFT SIDE UNDER HIS STOMACH.

EMPL CLIMBING FROM A HOPPER SLIPPING ON STAIRS.TRIED TO CATCH HIMSELF GRABBING ONTO ANGLE IRON PULLING BACK OUT.

IN TAKING DOWN A CONVEYOR, CABLE BROKE AND THE HANDLE ON THE HITCH-HIKER HIT HIM IN THE FACE.

WELDING & A PIECE OF SLAG FLEW INTO EYE

EE WAS WORKING ON A CRUSHER USING A SLEDGE HAMMER HE PULLED A MUSCLE WHILE USING THE SLEDGE HAMMER.

LIFTING CAT WALK.

WHILE TAKING THE AIR HOSE OFF OF COMPRESSOR, THE HOSE BLEW APART AND THE HOSE OR CLAMP CUT HIS ARM (APPROX. 5").

EE WAS CLEANING UP IN A BUILDING AND PUTTING ROLLERS IN A BUCKET WHEN HE PULLED BACK MUSCLES.

EMPLOYEE WAS PULLING DRUM ON RIGHT FRONT TIRE OF A PAYLOADER TRUCK PINCHED HIS FINGER IN JACK.EMPLOYEE PASSED OUT AND HIT HEAD ON THE CONCRETE FLOOR.

EMPLOYEE WASCLEANING LOOSE MATERIALS FROM CONVEYOR WHEN GLOVE BECAME CAUGHT IN CONVEYOR.

EMPLOYEE WAS REPAIRING CRUSHER, HAD FOOT INSIDE HELD FOOT IN ORE POSITION FOR A LENGTH TIME RESULTING IN BRUSING IT.

EMPL WAS REMOVING DRAIN PLUG FROM HAULER TRANSMISSION WHEN WRENCH SLIPPED EMPL LOST BALANCE HITTING SHOULDER ON BOTTOM OF TRUCK

EMPLOYEE PARKED FRONT END LOADER CLIMBING DOWN THE LADDER FROM IT HIS FINGER ON RT HAND CAUGHT ION RAIL OF LADDER INJURING SEVERAL FINGERS TO RT HAND AGAINST HIS SUPTS ADVICE DID NOT SEEK MEDI CAL CARE UNTIL 10-14-88

EMPL WAS WORKING IN AREA WHERE EARLIER IN THE DAY THE DRIVE BELTS ON SMALL CONVEYOR HAD BEEN REPLACED AFTER VBELTS WERE REPLACED EMPL DID NOT REPLACE VBELT GUARD EMPL I. NAME WAS SHOVELING IN THIS AREA AND APPARENTLY WHETHER BY SLIPPING OR INADVERANTLY PUTTING HAND IN VBELT DRIVE HAND WENT AROUND DRIVE PULLEY AND TWISTED ARM AND THREW VICTIM UP AGAINST CONVEYOR ON MOTOR HITTING EL

UNLOADING SCREENS FOR PORTABLE PLANT.FINGER GOT STUCK UNDER SCREEN SHARP EDGE CUT FINGER.

EMPLOYEE WAS OBSERVING STEEL BEING CUT WAITING TO REMOVE STEEL WHEN STEEL SUDDENLY FELL ON HIS RT LEG BREAKING HIS ANKLE AND SHIN BONE

HAND PLACING BELT ROLLER ON CONVEYOR BELT. EMPLOYEE LET ROLLER DOWN ON HIS LEFT THUMB THEN JERKED IT OUT FROM BETWEEN ROLLER AND CONVEYOR FRAME. THIS RESULTED IN LEFT THUMB NAIL BEING PULLED OFF.

EMPLOYEE WAS TA5ING APART CRUSHER WITH ANOTHER EMPLOYEE WITH A BAR AND SLEDGE HAMMER. WHILE HE WAS USING BAR TO MOVE DISASSEMBLY NUT, THE OTHER EMPLOYEE WAS USING SLEDGE HAMMER TO LOOSEN BY HAMMERING. HAM4ER REBOUND OFF FROM NUT HIT HIM A BLOW ON BRIM OF HARD HAT CAUSING BRUISING.

I.NAME & I.NAME3IN PROCESS OF REMOVING WHEEL AND TIRE FROM LARGE QUARRY TRUCK WHEN CHAIN AROUND THE CIRCUMFERENCE OF THE TIRE ROLLED ON TIRE AND CAUGHT EMPL FINGER.

PIN BROKE ON LOADING CHUTE LEVER ALLOWING LEVER TO STRIKE EMPLOYEE IN LEFT ARM BRUISING UPPER ARM.