Buscar en el registro

At approximately 7:20PM the shift supervisor was conducting work area inspections, finding a fall of ground in the 3800 ramp. The fall of ground was above the anchorage zone in an active working area that impeded passage.

Slip lead to sprain of right foot. Restrictions imposed

The aero phine bulk storage tote was leaking. The employee checked the tote level and slipped, breaking both ankles.

After tightening a casing connection, the employee put EE's hands in the derrick before the pipe settled, pinching EE's thumb between the string and the table. Resulting in a half inch laceration.

During a tail screen change at the West Dedicated Plant, an employee was potentially exposed to HCN. After the task, the employee reported lightheadedness and nausea, was evaluated at the onsite clinic, and transported to a hospital. No injury or illness was diagnosed.

Dismounting D11 Dozer in the Truck Shop.

Metal HEPA filter frame and latex gloves.

Weather: sunny, haul road ground conditions with medium-sized rock in the road.

Pulled a muscle while walking and bending over on the blast pattern.

Employee was attempting to adjust bolt alignment fingers on bolter using a hammer, while doing so the employees left hand pinky finger got caught between the hammer and the alignment finger causing a laceration. Employee received 7 stitches.

Below freezing temperatures, leading to icy areas on the slope. The employee fell, jarring their back.

Employee coming downstairs of a haul truck, their knee popped resulting in 2 tears that require surgery.

Employee was exiting a Bobcat Skidsteer loader and rolled their left ankle.

An employee was working on an Auto Valve, when the handle was pulled, it came loose and the employee lost their balance causing them to fall. Resulting in a fracture on fibular head.

While unbolting a flange, a faulty bolt with threads coming off contacted the right index finger, resulting in 13 stitches.

Employee was operating a haul truck and was jarred while being loaded by a shovel.

Employee was lifting an equipment part out of a storage bin and felt a pull in their lower back.

Employee felt a pop in their hip while picking up a paint bucket on 2/23 and then again while changing filters on 2/24 that resulted in additional back pain.

Employee was putting a wheel chock into a chock holder when they smashed their finger resulting in a fracture.

Employee was attempting to seat a clamp and struck right thumb with brass hammer. Employee has a fracture in thumb.

Employee was checking fire extinguishers and stepped on a rock rolling EE's right ankle.

Employee was performing work with a sledgehammer on 1/25/25. Due to increasing pain, medical attention was requested on 1/27/25 and the employee was taken off of work.

Employee had a pipe wrench up to chest while working on a pipe and was trying to use body weight for leverage when employee felt a pop in ribs. On 1/13/25, the employee was taken off of work after further medical evaluation.

A haul truck operator was jarred, while being loaded by a loader, when the loader bucket made contact with the bed of the haul truck. On 1/16/2025, the employee was taken off of work due to continuous pain.

While an employee's (EE) left arm was supporting a drifter on its side during re-installation on the Bolter Boom, additional mechanics began to push the drifter into place with the EE's arm still holding the drifter. This caused the EE's arm to be pinched in between the drifter and the slide, resulting in swelling and soreness to the EE's arm.

The employee (EE) was using a paint stick to begin marking boot holes following a heading inspection. The EE's right foot slipped on uneven ground causing their weight to shift left. The left foot also slipped, and the EE began to fall to the ground. A rock came between the ground and leg just above the left calf area. The impact resulted in a fracture to the lower left fibula.

An Arc Flash occurred as an employee (EE) attempted to throw a transfer switch that was under load. The flash blew the enclosure door open. This struck the EE in the face and forced the EE backward. EE received minor burns to the left cheek and neck while sustaining facial injuries to the mouth and teeth.

Employee was entering mine site for start of shift and felt something hit their eye. Prescription medication was later given to prevent any infection due to evidence of a foreign object that had been in the eye.

Contributing factor are trip hazard, multiple people in station.

When moving the rod holder jaw on a drill, the employee pinched their finger resulting in a partial finger amputation that required sutures.

Employee was racking out a substation and grabbed a live stab resulting in an electrical shock and burns.

Employee felt a pop in their chest while lifting a pipe to screw in spin locks.

Employee was exposed to nitrogen dioxide on 5/15/24. On 6/6/24, it was determined that the employee was experiencing respiratory related symptoms due to this incident and additional medical treatment was needed.

Empire Employee twisted knee after it was caught in between ice chest and other items in the back of service truck.

Helper was dumping tubes as per normal, site conditions were warm clean and dry. Helper was using excessive force to empty the core sample and heard a pop in shoulder and experienced pain.

On 1/8/2024 employee was assisting with lifting an oven onto a cart when they felt pain in their shoulder. It was later determined that surgery was needed and was completed on 6/13/2024.

Employee was walking down a 6060 cat shovel with a small box. EE fell approximately 7 steps to the ground. This resulted in the employee sustaining some scratches to their stomach, knees, and face. Along with breaking their jaw.

Employee's hand made contact with a sharp spinning bolt resulting in a laceration.

Employee's hand made contact when wrench slipped off bolt causing a laceration.

Individual went to tighten the pipe collar with an impact. This was when the right index finger got caught between the impact socket and the table bushing bolt. Resulting in finger laceration.

Employee slipped and fell due to snow on the ground resulting in a distal fibula fracture.

Employee was walking when they stepped wrong and twisted their knee on 11/28/2022. On 12/21/2022, it was determined that the employee needed surgery due to a torn meniscus.

Employee was using a hammer and made contact with their hand resulting in a laceration.

Employee lost their balance and fell forward resulting in a laceration on their forehead.

Employee was installing pump drive. Lining up in proper position. While moving to desired position employee had right pinky finger between pump drive and housing. The pinch resulted in a laceration requiring 2 stitches.

Employee's hand was pinched between the top edge of a distributor and dart causing a laceration and fracture.

EE was finishing blowing off load of Cyanide into ADR tank. Went to back of truck and Cyanide Crystals fell from top of Storage tank and hit EE, the trailer, and the ground. The wind was blowing toward back of tanker. EE was not sure if EE had inhaled any or not but had a co-worker watch EE disconnect then go get the Supervisor. EE then called mayday.

Employee received a laceration that required two stitches when a rubber tire dozer and scraper made contact.

Employee's foot was smashed when raising the shovel ladder.

An employee's finger was pinched resulting in an avulsion that required a skin graft surgery.