Buscar en el registro

2 TWO EMPLOYEES WERE UNLOADING SCREENS APPARENTLY THEY GOT OVERBALANCED AND FELL WITH THE SCREENS.

EMPLOYEE HAD BUILT A GUARD FOR WATER PUMP. HE WAS FITTING GUARD TO PUMP WITHOUT STOPPING PUMP GUARD WAS THROWN BACK INTO EMPLOYEE BY PULLEY.

EMPLOYEE WLEDING-INSIDE BIN-BURNT EYES-INSPECTED LATER DATE.

EE WAS PLACING CHAINS ON HOOKS ON LOADER BUCKET TO LIFT A METAL BIN. AS OPERATOR LIFTED BUCKET, BIN SLID TOWARD LOADER BUCKET AND STRUCK EE S FOOT HE WAS WEARING STEEL TOED BOOTS.

EMPLOYEE GOT CIK. TOLD SUPERVISOR HE HAD KIDNEY STONE. DR. SAID HE HURT BACK.

EMPLOYEE WAS CUTTING CONVEYOR BELT KNMIFE SLIPPED & CUT LEG (SUTURES)

EMPLOYEE WAS HOLDING A PORTABLE LIGHT AND GOT SHOCKED- FELL BACK ONTO PART OF PLANT TREATED AND RELEASED; TOOK OFF 12-7-92.

EMPLOYEE STATED THAT HE HAD FUELED LOADER AS HE PARKED IT HE SLIPPED AND FELL

EMPL DISMOUNTING EUCLID HAUL UNIT,SLIPPED AND FELL.

54736YEE WAS PRYING OUT OF SCREEN FRAME-FLAG BROKE OFF AND FELL ON THUMB CUTTING IT (4 STITCHES).

EE WAS HELPING TO REPAIR A ROLL CRUSHER. TIRE FELL AGAINST EE.

EMPLOYEE WAS CUTTING CONVEYOR BELT-KNIFE SLIPPED; CUT FACE.

EMPLOYEE WAS CLOSING BIN GATE, USING AN ATTACHED HANDLE, BIN FAILED TO CLOSE TIGHT, EMLOYEE SLAMMED GAT ECLOSED AND MASHED HIS THUMB BETWEEN STORAGE BIN LEG AND GATE CLOSED.

EMPL OPERATING DOZER PUSHING BOULDERS,MACHINE GOT ON A BOULDER AND SLIPPED OFF JARRING EMPL . WMPL WORKED UNTIL 5-5-92.

EMPLOYEE SET A TRAILER PIN ON DOZER. AS HE STARTED TO GET ON DOZER, PIN FELL AND STRUCK HAND.

EE WAS SITTING ON LOADER BUCKET MAKING A REPAIR TO CONVEYOR JOB FINISHED OPERATOR LOWERED BUCKET TO GROUND. BUCKET APPARENTLY JARRED EE AND AS HE WAS SITTING ON HIS FOOT A SMALL BONE WAS CHIPP ED.,

EMPLOYEE WAS GRINDING ON METAL WITH GRINDER, HAND SLIPPED AND HIS HAND WAS STRUCK BY GRINDER.

EMPLOYEE CLAIMS REPETIVE MOTION CAUSED CARPEL TUNNEL SYNDROM.

EMPL PICKED UP CAN OF GREASE PULLED SHOULDER MUSCLES.

EMPLOYEE PICKED UP A BATTERY IN SHOP-REINJURED REPAIRED HERNIA.STARTED LOSING TIME JAN 8,1992.

EE REMOVED A CONVEYOR IDLER FROM CONVEYOR HE PUT IDLER ON BELT HE INDAVENTLY KNOCKED IDLER OFF BELT HE FELL OVER END CUT EE S HEAD.

LIGHTENING STRUCK PLANT AND KNOWED OUT METAL DETECTOR. EMPLOYEE HEARD METAL IN CRUSHER AND WAS WATCHING BELT FOR METAL. CRUSHER THREW OUT A PIECE OF METAL AND IT HIT EMPLOYEE.

BACK SURGERY 9-91 ROUTINE EXAMINATION FOUND TO HAVE MILD TO MODERATE LUNG DISEASE

EMPLOYEE WORKED IN RIP RAP PLANT-BACK BEGAN TO HURT HIM DURING THE NIGHT OF 11-14-91.

EMPLOYEE WAS OPERATING A LOADER-INADVERTLY BACKED IN A BANK OF PIT HE WAS MINING EMPLOYEE WORKED TILL 11-25-91-(WENT TO DOCTOR).

GREASING EQUIPMENT WORKED THRU 10-17 SURGERY 10-1891 OFF WORK 10-18-91./

EMPLOYEE WAS CHANGING SCREENS -SSCREEN SLIPPED-SHARP CORNER OF SCREEN CUT FINGER

EMPLOYEE WAS INSTALLING RING AROUND CONE CRUSHER. CONE SETTLED AND PINNED HAND BETWEEN RING AND CYLINDER.

SLIPPED ON CATWALK-BACK BEGAN HURTING 08-15-91 (TOOK OFF WORK)

EMPLOYEE SAID HE LIFTED A TRAILER WELDER TONGUE & HURT HIMSELF WORKED UNTIL 08-04-91

OPERATOR LOST CONTROL OF LOADER-LOADER RAN INTO SMALL DITCH-OPERATOR HIT HEAD ON WINDSHIELD.

EMPL PICKED UP BOULDER TO THROW INTO JAMMED CRUSHER.

EMPL WAS STRETCHING FENCE USING CLAW HAMMER FENCE SLIPPED CUT THUMB.

EMPLOYEE REPORTED THAT HE HURT HIS SHOULDER LIFTING A HAMMER FOR A CRUSHER.

EXTENSIVE ELECTRICAL WORK BEING DONE ON PLANTS, EMPLOYEE WAS SITTING ON CONVEYOR BELT WORKING ON LACINGS, EMPLOYEE THOUGHT CONVEYOR WAS LOCKED OUT FOR UNKNOWN REASON BELT STARTED-EMPLOYEE FELL OFF BELT.

EE WAS WORKING ON DRAGLINE HE STEPPED BACK SLIPPED AND FELL AS HE FELL HE CAUGHT HIS FOOT UNDER THE FAIRLEAF OF THE DRAGLINE.

EMPLOYEE WAS CLEANING A WORK PLATFORM, ABOVE HIM A PULLEY BROKE AND DEBRIS FELL ON HIM.

EMPLOYEE THINKS HE HURT HIS BACK MOVING EMPTY BARELS. HE ALSO STATED THAT HE MAY HAVE PICKED UP SOMETHING HEAVY.

EMPLOYEE WAS CUTTING CONVEYOR BELTING, KNIFE SLIPPED AND HE CUT HIS THUMB.

BUMPED ELBOW ON LOADER.5-20 DR VISIT,DR ADVISED SURGERY-RELOCATED NERVE.6-25 HAD SURGERY,1ST DAY OFF.

EMPLOYEE WAS CLEANING UNDER PLANT. WEDGE FELL OUT OF CRUSHER ABOVE HIM FELL AND HIT HIS HEAD.

EMPLOYEE WAS CLIMBING UP ON A CONVEYOR TO REPAIR A TORN BELT. HE PULLED AGAINST A GUARD, LOST HIS BALANCE AND FELL, INJURING HIS HEAD.

EMPLOYEE WAS CUTTING BELTING- KNIFE SLIPPED (STITCHES)

WASCLEANING SURGE TUNNEL, PICKED UP A ROCK AND INJURED BACK.

INJURED WAS INSTALLING A SEAL IN CYLINDER USING A SCREWDRIVER AS A PRY TOOL IT SLIPPED AND HE PUNCTURED HIS HAND INFECTION DEVELOPED HOSPTILIZED.

EE CLIMBED UP ON R-35 BUMPER TO CHECK HIS ENGINE SLIPPED AND FELL.

EMPLOYEE WAS TURNING CONE CRUSHER BY HAND TO MOVE FINGERS BEFORE THEY WERE PINCHED IN V-BELT GROOVE.

EMPLOYEE HAD INSTALLED BRASS LINER BUSHING IN A CONE CRUSHER. SLIPPED AND FELL. JAMMED KNEE.

EMPLOYEE WAS CLEANING UNDER PALNT SLIPPED AND FELL-AS HE FELL HE STRUCK HIS HEAD ON A PIECE OF METAL ON A PLANT SUPPORT.

EMPL CHANGING GREASE FITTING ON SCREEN-ECCENTRIC COUNTERWEIGHT ROLLED AND CUT EMPL FOOT.